ALUMINUM BOTTLES
Aluminium Bottle, Black Spray with Matte Silver Collar, Smoky Overcap, 225 ml
Pack size50 ml100 ml200 ml225 ml
This aluminium bottle with a mini trigger sprayer is a ready-made combination for tonics, hydrosols and refreshing sprays , that is, thin liquid cosmetic products applied by spraying. full description
Lowest price in the last 30 days: €3.16
Total for 1 pcs: €3.16
Quantities add up across all combinations of this bottle.
Product description
This aluminium bottle with a mini trigger sprayer is a ready-made combination for tonics, hydrosols and refreshing sprays, that is, thin liquid cosmetic products applied by spraying. The 225 ml capacity suits products for everyday use at home as well as a smaller batch for sale or gifting.
Aluminium blocks light, the bottle is lightweight and does not break when dropped, so it holds up in the bathroom, on the road and in a handbag. The silver finish of the bottle is complemented by a black sprayer with a matte silver collar, so the set looks uniform without any further adjustments.
Suitable uses
- Facial toners and hydrosols – thin water-based products applied to the face or body as a fine mist, without touching them with your hands.
- Herbal and refreshing sprays – for the body, hair or the air in a room. The sprayer distributes the contents evenly over a larger area.
- Hair sprays – leave-in conditioners, setting waters and similar low-viscosity products.
- Room fragrances and fabric sprays – water-alcohol blends, where the bottle also protects the fragrance component from light.
The set is declared as suitable for contact with cosmetic products. It is not intended for food.
Sprayer and dispensing
The sprayer is mechanical and works without a propellant gas. Each press releases a small, consistent amount of the contents as a fine mist. Dispensing is more economical than pouring from the bottle, and the product spreads more evenly on the skin or hair.
Both the bottle and the sprayer have a 24/410 neck finish, so they fit together without any adapters. The dip tube reaches the bottom of the bottle so that almost all of the contents can be used. Spray with the bottle upright or only slightly tilted; when it is turned upside down, the dip tube does not draw up the liquid.
The sprayer is designed for thin water-based or water-alcohol products. Thicker emulsions, oils and products with undissolved particles clog the nozzle or do not pass through it at all. If you are using your own formulation, try a small amount first.
Nominal and total volume
The nominal volume is the volume the bottle is designed for in normal filling. The total brimful volume, given in the parameters, is the physical volume of the bottle up to the neck. The difference provides room for the dip tube and the sprayer seal, and for the expansion of the contents when the temperature changes. Fill the bottle to the nominal volume, not to the brim, otherwise the contents will leak out when you screw on the sprayer.
Good to know
Before the first filling, wash the bottle and the sprayer, disinfect the inside with isopropyl alcohol or ethanol and leave it to dry completely. Rinse the sprayer by pressing it several times in clean water and then a few times with no liquid, so that any residues are pushed out of the tube and nozzle.
The bottle can be reused. When you change the contents, wash and disinfect it in the same way as before the first use, otherwise the fragrance components would carry over into the new product. After filling, check that the sprayer sits tightly against the neck and does not leak around the thread.
The sprayer contains plastic parts made of polypropylene. Undiluted essential oils and aggressive solvents can damage the plastic over time, so check compatibility with your specific formulation on a single piece before a larger production run. We also recommend testing in advance how the bottle behaves with contents that have a markedly acidic or alkaline pH.
Do not fill the bottle with hot contents and do not leave it in the sun or near a heat source. Aluminium protects the contents from light, not from heat; the metal wall heats up quickly, like any metal packaging.
The bottle is made of aluminium, and the sprayer combines plastic and metal, so unscrew the sprayer from the bottle before disposal.
You will find closures with the same neck type and other ready-made bottle + closure combinations in the Handymade range.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 225 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

















































