ALUMINUM BOTTLES
Aluminium Bottle, Black Spray with Glossy Silver Collar, 225 ml
Pack size50 ml100 ml200 ml225 ml
This aluminium bottle with a fine mist sprayer and a capacity of 225 ml is designed for thin cosmetic products that are applied by spraying: toners, hydrosols, hair and body sprays or refreshing scented waters. full description
Lowest price in the last 30 days: €3.09
Save €0.04 with this set
Total for 1 pcs: €3.09
Quantities add up across all combinations of this bottle.
Product description
This aluminium bottle with a fine mist sprayer and a capacity of 225 ml is designed for thin cosmetic products that are applied by spraying: toners, hydrosols, hair and body sprays or refreshing scented waters. Aluminium does not let light through, so the contents are protected from UV radiation, and the bottle will not break if dropped. It is lightweight, which you will appreciate for travel cosmetics as well as when selling your own products.
The set includes a mini trigger sprayer with a black head and a glossy silver collar that matches the silver bottle. The sprayer disperses the liquid into a fine mist in small doses, so the product is applied evenly and without running. Both the bottle and the sprayer are declared suitable for contact with cosmetics.
Suitable uses
The sprayer is designed for liquids with a viscosity close to that of water. Thicker products, gels and oils either do not pass through the fine nozzle or come out as a stream instead of a mist.
- Toners and hydrosols – water-based products with light-sensitive plant ingredients, which opaque aluminium protects better than clear glass or plastic.
- Hair sprays and leave-in conditioner sprays – thin water-based mixtures applied to the hair straight from the bottle.
- Body and refreshing sprays – scented water-based or alcohol-based compositions for the skin.
- Alcohol-based toners – the unbreakable, lightweight packaging is also suitable for a handbag or travelling.
Filling and volume
The bottle is filled up to the nominal volume, that is, the amount it is designed for under normal filling. The total brimful volume given in the parameters is the physical volume up to the neck. The difference between the two values leaves room for the tube and the sprayer mechanism and for the expansion of the contents when the temperature changes. A bottle filled to the brim overflows when the sprayer is fitted, and the contents are pushed into the thread when warmed.
A narrow funnel helps with filling, as the neck of the bottle is relatively small. After filling, screw on the sprayer and press it several times to fill the tube. The first doses are often weaker until the mechanism is primed.
If the sprayer tube extends past the bottom of the bottle and bends inside, shorten it with a sharp knife so that it only touches the bottom. A straight tube draws up the contents down to the last millilitres.
Good to know
Before the first filling, wash the bottle and the sprayer, rinse them with isopropyl alcohol or ethanol and leave them to dry completely. The sprayer is cleaned by pumping clean water through it and then alcohol, so that no product residue remains in the nozzle.
Aluminium can react with strongly acidic or alkaline contents and with solutions containing a higher proportion of salts. For water-based products with a low pH, such as toners with fruit acids, we recommend testing the finished formulation before filling larger quantities: leave the bottle filled for several weeks and observe the appearance of the contents and the inside of the bottle.
Products with a high proportion of essential oils, solvents or fragrance compositions may affect the plastic parts of the sprayer over time. For such formulations, check the tightness and function of the mechanism before using the packaging for a larger batch.
The set is intended for cosmetic products. It is not declared for contact with food, so the bottle is not suitable for cooking oils or drinks.
The bottle can be used repeatedly; between fillings it is enough to clean it in the same way as before the first use. When travelling or transporting it, check whether the sprayer stays tight when the bottle is tilted, or transport the packaging upright. After use, the aluminium bottle belongs in metal recycling; the sprayer consists of several materials and is disposed of separately.
Closures with the same neck type as stated in the parameters, and other ready-made packaging and closure combinations, can be found in the Handymade range. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 225 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


















































