ALUMINUM BOTTLES
Aluminium Bottle, Transparent Plastic Cap, 225 ml
Pack size50 ml100 ml200 ml225 ml
Aluminium bottle with clear cap, 225 ml is a ready-made set for filling with your own cosmetics: a silver aluminium bottle with a 24/410 neck finish and a plastic screw cap with a liner that seals the neck. full description
Lowest price in the last 30 days: €2.65
Total for 1 pcs: €2.65
Quantities add up across all combinations of this bottle.
Product description
Aluminium bottle with clear cap, 225 ml is a ready-made set for filling with your own cosmetics: a silver aluminium bottle with a 24/410 neck finish and a plastic screw cap with a liner that seals the neck. The metal blocks light from reaching the contents, so the set is especially suitable for vegetable, body, massage and hair oils, cleansing oils, or thinner lotions and toners that are dispensed by pouring. The bottle is lightweight and does not break when dropped, which you will appreciate in the bathroom, when travelling and when shipping finished products.
The whole set, that is the bottle and the cap, is declared as suitable for contact with cosmetics. It is not approved for contact with food.
What it is suitable for
- Protection from light – aluminium is opaque, so vegetable oils, blends with essential oils, and products with dyes and plant extracts are not affected by daylight on the shelf.
- Pourable products – the screw cap without a dispensing opening is intended for products that are poured from the bottle or measured into the palm: body and massage oils, bath oils, hair rinses, facial toners.
- Low weight and durability – compared with glass of the same volume, the bottle weighs a fraction as much, does not break and can be packed into a parcel without worry. However, the metal can deform under a strong impact.
- Volume for a common pack size – 225 ml corresponds to the usual size of a body oil or toner.
Filling and volume
The nominal volume of the bottle is 225 ml, which is the amount the packaging is designed to hold when filled normally. The brimful volume, that is the physical volume up to the neck, is somewhat larger. The difference is a reserve for the cap with the sealing liner and for the expansion of the contents with changes in temperature. Therefore fill up to the nominal volume, not to the brim, otherwise the contents will overflow when the cap is screwed on or will remain under pressure beneath the cap.
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Not even a drop of residual water belongs in an oil-based product.
Cap and seal
The cap is made of polypropylene (PP) with a liner of foamed polyethylene (EPE), which sits against the neck when tightened and seals it. The ribbed surface gives a good grip even with oily hands, which is no small advantage when working with oils. The clear cap keeps the metal bottle visually in the foreground.
Each time you screw the cap on, it is enough to tighten it by hand until the liner seats. Overtightening does not improve the seal and is more likely to damage the liner. If you need to dispense the contents in drops or spray them, you will find closures with the same 24/410 neck finish and ready-made combinations in the Handymade range. With your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific formulation.
Good to know
The resistance of the aluminium and of the cap to specific ingredients is not declared separately. For contents with a high proportion of essential oils or alcohol, or for markedly acidic or alkaline formulations, we therefore recommend a trial filling lasting several weeks and a check of the cap liner and of the scent and colour of the contents. The same applies to water-based products, which behave differently from oils.
The set is not approved for contact with food. Do not use it for homemade oils or syrups, as it is intended exclusively for cosmetic products.
After thorough washing and disinfection, the bottle can be reused, preferably for the same type of contents, because the scent of oils and essential oils is difficult to remove from the sealing liner. Before disposal, separate the aluminium bottle and the plastic cap, as they are recycled separately.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 225 ml
Clear Plastic Cap, Ribbed, 24/410
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



















































