+421 950 333 113info@handymade.store−10 %Shop now

PLASTIC BOTTLES

Clear Plastic Bottle, Black Lotion Pump With Glossy Silver Collar, 100 ml

Pack size100 ml150 ml200 ml250 ml500 ml

A clear 100 ml PET bottle and a black and silver pump make a ready-made packaging set for liquid and medium-thick cosmetic products. full description

AvailabilityIn stock · 360 pcs
Product codeO24PP100-OVD24CS
€1.19incl. VAT

Lowest price in the last 30 days: €1.19

Volume pricing
1–199 pcs€1.19Your price
200–999 pcs€1.12−6 %
1000–4999 pcs€1.04−13 %
from 5000 pcs€0.93−22 %

Total for 1 pcs: €1.19

Quantities add up across all combinations of this bottle.

Product description

A clear 100 ml PET bottle and a black and silver pump make a ready-made packaging set for liquid and medium-thick cosmetic products. The set is suitable wherever you need to dispense roughly the same amount every time without opening the bottle: body lotions, liquid soaps, light creams, conditioners or oils. Through the clear wall you can see how much content is left, and the plastic will not break if dropped in the bathroom or while travelling.


What it is suitable for

The pump with a 24/410 neck finish is built for products that can be drawn up through a tube and pushed through the pump orifice. It handles emulsions from liquid to creamy consistency, liquid soaps and shower gels, shampoos and conditioners, and liquid oils or oil blends for the body or massage. It will not draw up thick butters, balms or solid creams; jars are better suited to those.

The 100 ml volume corresponds to a smaller trial pack, a travel size or a customer sample.

  • Hygienic dispensing – the content does not touch your fingers and no bathroom water gets into the bottle during use, which reduces the risk of contaminating the product.
  • Control over quantity – one full press dispenses approximately 1 ml, so you can estimate consumption per use and how long the whole pack will last.
  • Clear material – you can see the colour and condition of the content, any separation of the emulsion or cloudiness without opening the bottle.
  • Low weight and break resistance – PET is suitable for the shower, for travel and for sending by post.

How to prepare and fill the set

Before the first filling, the bottle and the pump are washed in warm water, disinfected with isopropyl alcohol or ethanol and left to dry completely. Moisture in the bottle or in the tube would dilute the content and could support the growth of microorganisms in water-based formulations.

The pump tube is supplied longer than the height of the bottle. Before fitting, shorten it so that it ends just above the bottom. A slightly angled cut helps to draw up the last remnants of the content. After screwing on the pump, press it several times, even though nothing comes out at first, until the tube and the mechanism fill with the product.

The bottle is filled up to the nominal volume of 100 ml, not to the brim. The headroom above this mark is needed for the tube and the lower part of the pump, which push the level up once screwed on, and for the expansion of the content when the temperature changes.

Nominal volume is the quantity the packaging is intended for under normal filling. The brimful volume is the physical volume up to the neck of the bottle and you can find it in the parameters. The difference between the two values is precisely the space for the closure and for the movement of the content, so do not base the filling on it.


Material and its limitations

Clear PET does not protect the content from light. Products with oils prone to oxidation, with vitamins, essential oils or plant extracts that change colour over time are better filled into amber or otherwise darkened packaging, or the set can be stored out of direct sunlight.

PET tolerates water-based and oil-based formulations, but higher concentrations of essential oils, some solvents and aggressive chemicals can make the bottle wall cloudy or damage it. For perfume blends, pure essential oils and products with a high alcohol content, we recommend letting the filled bottle stand for several weeks before a larger production run and observing the wall, the tube and the tightness of the pump.

The pump is made of PP plastic and an aluminium collar, which gives it its silver look. When disposing of it, unscrew it and sort it separately from the PET bottle, as it is a multi-material part.


Good to know

The bottle and the pump are declared suitable for contact with cosmetic products; you can find the declaration of conformity with the product. The set is not intended for food.

After emptying, the bottle can be washed, disinfected and filled again. With the pump, residue of the previous product in the mechanism cannot be completely ruled out, so when refilling we recommend sticking to the same type of product.

If the pump does not suit you, the bottle has a standard 24/410 neck finish. Closures with the same neck finish, as well as ready-made combinations of the bottle with another closure, are available in the Handymade range. If you make your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.


Frequently asked questions

Is the 100 ml plastic bottle with a pump suitable for thick creams?
No, the pump is intended for liquid and medium-thick products. The tube will not draw up a thick cream, body butter or balm, and the mechanism will jam. It dispenses light creams, body lotions, liquid soaps, conditioners and oils without difficulty. For borderline consistency, we recommend filling one bottle as a trial and testing the dispensing after several days of standing.
Does the clear PET bottle protect the content from light?
No, clear PET lets light through. It suits products that are not light-sensitive, or products that are used up quickly and stored in a cabinet or away from a window. Oils prone to yellowing, and formulations with vitamins or with extracts that change colour, are better filled into amber or darkened packaging.
How much product does the pump dispense per press?
Approximately 1 ml per full press. The actual amount depends on the thickness of the product: a thinner body lotion or oil comes out fuller, while a thicker emulsion may give a little less. With a 100 ml fill, this corresponds to about a hundred doses. The figure helps you estimate consumption per use and state the recommended amount per use to your customers.
Can the 100 ml bottle with a pump be reused?
Yes, after emptying, the bottle is washed, disinfected with alcohol and filled again once dry. The pump can be rinsed with warm water and alcohol by pumping them through the mechanism, but complete cleaning of the inside is not guaranteed. When refilling, we therefore recommend the same kind of product and, for water-based formulations, always thorough drying before filling.
Is the plastic bottle with a pump suitable for oil-based and alcohol-based products?
For oil-based products, yes: PET tolerates vegetable oils well and the pump dispenses liquid oils without difficulty. For products with a high alcohol content or a larger amount of essential oils, we recommend a test before serial production: let the filled bottle stand for several weeks and observe any cloudiness of the wall, the condition of the tube and the tightness of the closure.
Is the plastic bottle with a pump approved for food contact?
No, the set is declared for contact with cosmetic products only. Neither the bottle nor the pump has a food-contact certificate, so it is not suitable for kitchen oils, syrups or any other food use. For cosmetics, a declaration of conformity is available with the product.

Parameters

Clear plastic bottle, 24/410 neck, 100 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
100
Brimful capacity
104 ml
Diameter
40 mm
Thread type
24/410
Height
106 mm
Product material
PETPlastic

Plastic pump dispenser, 24/410, black-silver, 180 mm

Product colour
BlackSilver
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
37 mm
Tube length
180 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Clear plastic bottle, 24/410 neck, 100 ml · O24PP100PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
PDSProduct Data Sheet
Clear plastic bottle, 24/410 neck, 100 ml · O24PP100PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
DrawingTechnical drawing
Clear plastic bottle, 24/410 neck, 100 ml · O24PP100PDF ↓
Plastic pump dispenser, 24/410, black-silver, 180 mm · OVD24CSPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.