PLASTIC BOTTLES
Clear Plastic Bottle, Black Lotion Pump With Glossy Silver Collar, 200 ml
Pack size100 ml150 ml200 ml250 ml500 ml
The clear plastic 200 ml bottle with a black and silver pump is a ready-made set for liquid soap, shower gel, shampoo, conditioner or body lotion, that is, for cosmetic products dispensed by pressing a pump. full description
Lowest price in the last 30 days: €1.14
Total for 1 pcs: €1.14
Quantities add up across all combinations of this bottle.
Product description
The clear plastic 200 ml bottle with a black and silver pump is a ready-made set for liquid soap, shower gel, shampoo, conditioner or body lotion, that is, for cosmetic products dispensed by pressing a pump. The bottle is made of clear PET, so you can see the contents and how much remains from the outside. The black and silver pump with a 24/410 neck finish screws straight onto the bottle, and no further closure is needed. The whole set is declared suitable for contact with cosmetic products.
What it is suitable for
- Liquid soaps and shower gels – the pump dispenses roughly the same amount with each press, which corresponds to normal use at the sink or in the shower.
- Shampoos and conditioners – the 200 ml volume is a common size for a bathroom shelf, and the pump can be operated with one hand.
- Body lotions and lighter emulsions – provided the viscosity allows the tube to draw the product up. With thicker creams, test a single bottle first.
- Samples and smaller batches – PET is light and shatter-resistant, which makes the bottles easier to transport and to sell at markets and in small businesses.
How the set works
The pump is screwed onto the neck of the bottle, and the tube reaches the bottom. When you press the head, it draws up the contents and pushes them out. One press corresponds to approximately 1 ml of product. The actual amount depends on the thickness of the contents and on how deeply the head is pressed. After filling and screwing on the pump, prime it by pressing it several times until the tube and mechanism fill and the product starts to come out.
Before the first filling, check that the tube reaches the bottom of the bottle without pressing against it or bending. If it is too long, cut it to the required length. A shortened tube draws up product better than a bent one.
Filling and volume
The nominal volume is the amount the bottle is designed for in normal filling. The brimful capacity given in the parameters is the physical volume up to the neck. The difference between them leaves room for the submerged pump tube and for the contents to expand when the temperature changes. For this reason, fill the bottle to the nominal volume, not to the brim. An overfilled bottle overflows when the pump is screwed on, and the contents get onto the thread, where they become sticky and spoil the appearance.
A PET bottle should be protected from heat and is not intended for hot filling. Let emulsions, gels and liquid soaps cool to room temperature before bottling, otherwise the bottle may deform.
Good to know
Clear material does not protect the contents from light. Products with vegetable oils prone to oxidation, or with light-sensitive active ingredients, are better bottled in dark packaging or stored away from direct light.
Water-based products and emulsions require suitable preservation. The pump limits contact between the contents and fingers, but air is drawn into the bottle during dispensing, so the packaging alone does not replace a preservative system.
The set can be reused. Before each filling, wash and disinfect the bottle and the pump, and let them dry completely.
For contents with a higher proportion of essential oils, alcohol or other solvents, we recommend checking how the PET and the plastic parts of the pump behave with your specific formulation before you fill a larger batch. The bottle is made of PET, and the pump combines polypropylene and aluminium, so the two parts are separated when sorting waste.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 200 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 200
- Brimful capacity
- 214 ml
- Diameter
- 47 mm
- Thread type
- 24/410
- Height
- 146,95 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


































































