Clear Plastic Bottle, Black Spray with Matte Silver Collar, 500 ml

The 500 ml plastic bottle with sprayer is a ready-made set for water-based cosmetic products that are applied by spraying. The clear PET bottle is paired with a black mini trigger sprayer with a matte silver collar. It is most often filled with hydrosols, facial and body toners, refreshing mists, hair sprays or solutions for moistening the skin before treatment. The clear plastic shows the colour of the contents and how much is left. The bottle is light and does not break when dropped – with a half-litre bottle in the bathroom or on a salon work table, you will appreciate this more than with glass.

How the set works

The sprayer has a 24/410 neck finish and screws easily onto the bottle. One press releases approximately 0.12 ml of liquid as a fine mist, which covers a larger area than a dropper or pump would. Toners and hydrosols therefore land on the skin evenly, and a hair spray reaches the lengths without soaking them. The matte silver collar is made of aluminium.

The mini trigger sprayer is designed for liquids as thin as water. Oils, thicker serums or solutions with a higher share of thickener clog the nozzle, and a stream comes out instead of a mist. If the contents include pieces of plant material, for example in homemade infusions, filter the liquid before filling.

Nominal and total volume

The nominal volume of the bottle is 500 ml, which is the amount the packaging is designed for in normal filling. Filled up to the neck, the bottle physically holds more. The difference serves as a reserve for the sprayer tube, which needs room in the neck, and for the air space above the liquid level. Fill to the nominal volume rather than to the brim, otherwise the contents will be pushed out through the neck when you screw on the closure.

Good to know

• Contact with cosmetics – the bottle and sprayer are declared suitable for use with cosmetic products.
• Not for food – the set is not approved for contact with food. For homemade oils, syrups or drinks, choose packaging with the appropriate certificate.
• PET and heat – do not fill the bottle with hot liquid and do not leave it in the sun or near a heat source. The material may deform, and light-sensitive contents lose stability faster in a clear bottle than in dark glass.
• Essential oils and solvents – for products with a higher share of essential oils or containing solvents, test the behaviour of the set on a smaller sample first. Do not expose the packaging to aggressive chemicals.
• Reuse – after thorough washing and drying, the set can be filled again. Rinse the sprayer with clean water and press it several times with nothing in the bottle to clear the tube and the nozzle.
• Other closures – all closures with a 24/410 neck finish from the Handymade range fit the bottle. If you make your own combination, check the tightness and dispensing with your specific formulation.
• Recycling – the bottle is made of PET and belongs in sorted plastic. The sprayer combines several materials, including the aluminium collar and a steel spring, so unscrew it before disposal and dispose of it separately.

Frequently asked questions