PLASTIC BOTTLES
Clear Plastic Bottle, Black Spray, Matte Silver Collar, Smoky Overcap, 150 ml
Pack size100 ml150 ml200 ml250 ml500 ml
A clear plastic 150 ml bottle and a mini trigger sprayer in black with a matte silver collar are sold as a ready-made set with a 24/410 neck finish. full description
Lowest price in the last 30 days: €1.25
Save €0.01 with this set
Total for 1 pcs: €1.25
Quantities add up across all combinations of this bottle.
Product description
A clear plastic 150 ml bottle and a mini trigger sprayer in black with a matte silver collar are sold as a ready-made set with a 24/410 neck finish. The bottle is made of PET, is lightweight and does not break if dropped on a tiled floor. Through the clear wall you can see how much content is left and whether the phases have separated. The sprayer disperses the content as a fine mist.
The set is intended for low-viscosity cosmetic products: face and hair toners, hydrosols, refreshing sprays, hair waters, spray deodorants or spraying alcohol used in soap making. Both components are declared suitable for contact with cosmetics.
What it is suitable for
- Toners and hydrosols – thin water-based products are applied evenly to the face or hair with the sprayer, without your hands touching the content.
- Hair and body sprays – the 150 ml volume is enough for a standard home pack, and the bottle also fits into a travel cosmetic bag.
- Production aid – a sprayer with alcohol is used to remove bubbles from the surface of cold process soap or to disinfect work tools. The bottle is suitable for both technical and cosmetic grade use.
- Samples and recipe testing – when trying out a new toner, it is enough to fill a smaller amount. The dip tube of the sprayer reaches the bottom and draws up almost the entire content.
Filling and volume
Nominal volume is the amount the bottle is designed for in normal filling. The brimful volume given in the parameters is the physical volume up to the neck. The difference between them provides room for the dip tube and the sprayer mechanism, and for the expansion of the content when the temperature changes. The bottle should therefore be filled up to the nominal volume. If it is overfilled, the content is pushed out through the neck when the sprayer is screwed on.
The dip tube of the sprayer is longer than the bottle, so shorten it with an angled cut so that it ends just above the bottom. Before the first filling, rinse the bottle and the sprayer, disinfect them with alcohol or isopropyl alcohol and leave them to dry completely. After filling, prime the sprayer by pressing it several times until the dip tube fills with the content.
Good to know
One press releases approximately 0.12 ml, which is enough for a fine mist of toner over the face. The sprayer cannot dispense thicker products, emulsions or oil serums, or becomes clogged by them. Pumps are more suitable for these.
Clear PET does not protect the content from light. Toners with plant extracts, and products with vitamins or essential oils, should therefore be stored out of direct sunlight. Do not fill the bottle with hot content; let the solution cool down first. For content with a higher proportion of undiluted essential oils or solvents, we recommend checking the behaviour of the plastic with your specific formulation. The bottle is not intended for aggressive chemicals.
The set is not declared for contact with food. It is used for cosmetics and technical solutions, not for food syrups or oils.
The bottle has a 24/410 neck and fits any closure with the same thread type from the Handymade range. If you combine your own parts, we recommend checking the tightness and dispensing with your specific formulation. The bottle is made of PET and the sprayer of PP with an aluminium collar; separate them before recycling.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 150 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

































































