PLASTIC BOTTLES
Clear plastic bottle, round, 150 ml, without closure
A clear 150 ml PET bottle and a 24/410 mini trigger sprayer make up a ready-to-fill set. The bottle is lightweight, does not break when dropped, and the clear walls let you see the level and colour of the contents. full description
Lowest price in the last 30 days: €1.13
Total for 1 pcs: €1.29
Quantities add up across all combinations of this bottle.
Product description
A clear 150 ml PET bottle and a 24/410 mini trigger sprayer make up a ready-to-fill set. The bottle is lightweight, does not break when dropped, and the clear walls let you see the level and colour of the contents. The sprayer disperses liquid as a fine mist, so the set suits facial toners, hydrosols, refreshing face and body sprays, hair sprays, and thin water-based or alcohol-based solutions.
How the set works
The sprayer screws directly onto the 24/410 neck finish of the bottle. The dip tube is matched in length to this bottle, so the contents are drawn up from the very bottom and no residue is left behind. It dispenses by pressing the head, and each press releases a small measured dose as a mist. After screwing it onto a full bottle, press the head several times to prime it until the tube and mechanism fill with liquid.
The mini trigger sprayer works with thin liquids. It disperses water-based solutions, hydrosols, alcohol-based mixtures and very light toners evenly. It cannot turn oils, gels and thicker emulsions into a mist, as the nozzle either sprays a stream or clogs. For oil-based products, a pump or dropper with the same neck finish is a better choice.
What the set is suitable for
- Facial toners and hydrosols – the mist is applied directly to the face without a cotton pad, and the contents do not touch your hands during use.
- Refreshing face and body sprays – water-based sprays with glycerine, aloe or hydrosols for summer days or after sun exposure.
- Hair sprays – thin leave-in conditioners, heat protection sprays or detangling sprays.
- Alcohol-based sprays – water-alcohol hand disinfectant sprays, fabric and yoga mat fresheners, room fragrances.
- Household sprays – thin cleaning solutions or solutions for plants, where an unbreakable bottle comes in handy.
Nominal and total volume
The nominal volume of 150 ml is the amount the bottle is designed to hold in normal filling. The total brimful volume is the physical capacity of the bottle up to the neck, and it is larger. The difference is a reserve for the dip tube and the sprayer mechanism, which takes up part of the space once screwed on, and for the movement of the liquid level when the temperature changes. Fill the bottle up to the nominal volume. If it were filled to the brim, the contents would be pushed out through the neck when the sprayer is screwed on.
Good to know
Clear plastic does not protect the contents from light. Store products with light-sensitive ingredients, such as vitamin C, some plant extracts or essential oils, away from direct sunlight, or choose dark packaging for them. For ordinary toners, hydrosols and alcohol-based sprays, transparency is an advantage, as you will notice in good time when a refill is needed or the contents turn cloudy.
Concentrated essential oils and some solvents can damage plastic over time. For formulations with a higher proportion of essential oils or with unusual solvents, we recommend testing how the bottle and the sprayer behave on a small amount first.
Cleaning and reuse. Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. Rinse the sprayer by screwing it onto a bottle of clean water or alcohol, pressing it several times and letting it dry. After washing, both parts can be used again as long as the head sprays evenly and the thread seals properly. Thorough rinsing is necessary with every refill, especially when changing the contents from an alcohol-based spray to a toner. Residues of the old contents in the tube would spoil the new batch.
Contact with cosmetics and food. The bottle is suitable for use with cosmetic products and has a declaration of conformity for this purpose. The set is not intended for contact with food.
Other closures. The bottle has a 24/410 neck, so other closures with this neck finish from the Handymade range also fit it, and you will find ready-made combinations on the bottle page. With your own combination, we recommend checking the seal and dispensing with your specific formulation.
Before filling a whole batch, test the finished set with a small amount of your formulation. You will find out whether the sprayer produces a mist without leaking, and whether the contents react with the bottle walls by turning cloudy or changing colour.
Recycling. The bottle is made of PET and goes in the plastic recycling. The sprayer consists of several materials, plastic and aluminium, so unscrew it from the bottle before disposal.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 150 ml, without cap
Plastic fine mist sprayer, 24/410, white, glossy silver collar, 12 cm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


















































