PLASTIC BOTTLES
Clear Plastic Bottle, White Spray With Glossy Silver Collar, 100ml
Pack size100 ml150 ml200 ml250 ml500 ml
Clear plastic bottle, white mini trigger sprayer, 100 ml A ready-made spraying set: a clear 100 ml PET bottle with a white mini trigger sprayer with a glossy silver collar, both with a 24/410 neck finish. full description
Lowest price in the last 30 days: €1.22
Save €0.01 with this set
Total for 1 pcs: €1.22
Quantities add up across all combinations of this bottle.
Product description
Clear plastic bottle, white mini trigger sprayer, 100 ml
A ready-made spraying set: a clear 100 ml PET bottle with a white mini trigger sprayer with a glossy silver collar, both with a 24/410 neck finish. The bottle is lightweight and unbreakable, and the clear wall lets you see how much is left, so it is ideal for carrying in a bag, for travel and for the home workshop. The sprayer releases the same small dose with each press.
The set is declared as suitable for contact with cosmetics.
What it is suitable for
The sprayer works best with liquid, thin contents that can be drawn up through the dip tube and dispersed into fine droplets:
- Hydrosols and facial toners – a water base is sprayed evenly, and the 100 ml volume matches a common home-use pack size.
- Hair sprays and fresheners – thin water-based or water-alcohol mixtures for hair, skin or textiles.
- Alcohol-based preparations – alcohol-based hair tonics and refreshing sprays with ethanol.
- Sprays for the home and workshop – water for moistening soap base, alcohol for removing bubbles from the surface of soap, solutions for cleaning tools.
A mini trigger sprayer of this type will not disperse thick emulsions, gels or vegetable oils. The mechanism clogs or the contents squirt out in a stream. If you are not sure about the thickness of the contents, test the sprayer beforehand with a small amount.
Volume and filling
The nominal volume is the volume the packaging is intended for under normal filling. The total brimful volume is the physical volume of the bottle up to the neck. The difference between them forms a reserve for the sprayer’s dip tube and for the expansion of the contents with changes in temperature. The bottle should therefore be filled to the nominal volume, not to the brim. Once the sprayer is screwed on, the liquid level rises, and overfilled contents would leak out through the thread.
The sprayer’s dip tube is supplied longer than the height of the bottle. Before the first filling, shorten it with an angled cut so that it reaches just above the bottom. The sprayer then draws up the contents right to the end and the tube does not curl inside the bottle.
Good to know
Before the first filling, wash the bottle and the sprayer, rinse them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the bottle would dilute the contents and could reduce the effectiveness of the preservative.
The clear wall does not protect the contents from light. Store hydrosols, preparations with essential oils and other light-sensitive mixtures in a cupboard or in the dark, and it is better to fill smaller amounts for a shorter period.
Both PET and PP tolerate water, common water-based formulations and alcohol solutions. Undiluted essential oils, solvents and aggressive chemicals can damage the plastic. For such contents, test how the packaging behaves on a small sample and do not leave them in it for a long time. Do not fill the bottle with a hot liquid, as PET deforms with heat.
The set can be reused. After emptying, rinse the bottle, pump clean water through the sprayer so that no residue of the contents remains trapped in the mechanism, and leave them to dry. The bottle is made of PET and the sprayer of PP with an aluminium collar, so separate them when disposing of them.
You can find closures and other sprayers with the same 24/410 neck finish, as well as ready-made combinations, in the Handymade range. If you make your own combination, we recommend checking the tightness and dispensing with your specific formulation.
Frequently asked questions
Parameters
Clear plastic bottle, 24/410 neck, 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 104 ml
- Diameter
- 40 mm
- Thread type
- 24/410
- Height
- 106 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.



































































