Clear Plastic Bottle, White Spray With Glossy Silver Collar, 200 ml

A clear 200 ml PET bottle and a white mini trigger sprayer with a glossy silver collar make a ready-to-use packaging set for tonics, hydrosols, refreshing face and body sprays or hair waters. The sprayer disperses thin liquids into a fine mist, so the contents are applied evenly, in small doses and without fingers touching the filling. PET is lightweight and does not shatter when dropped, which makes it suitable for the bathroom, a handbag and travel. Through the clear walls you can see the colour of the contents and how much is left. Both the bottle and the sprayer come with a declaration of suitability for contact with cosmetic products.

What it is suitable for

• Face and body tonics – thin water-based solutions that are sprayed directly onto the skin and left to dry or gently patted in.
• Hydrosols and floral waters – the mist dispenses small amounts and nothing is wasted on a cotton pad.
• Hair sprays and tonics – leave-in sprays to refresh the hair, curl-refreshing solutions or hair waters for the scalp.
• Fabric and room fresheners – water-based or alcohol-based sprays with a fragrance composition.
• Work surface cleaning solutions – a technical-grade bottle also works for cleaning tools and moulds during cosmetic production.

The mini trigger sprayer is designed for liquids with a density close to water. Lotions, thicker serums and pure oils produce a stream or drops instead of a mist, and the pump may become clogged. With thicker or oil-based fillings, test the sprayer with your specific formulation before filling a larger quantity.

Volume and filling

The nominal volume is the quantity the bottle is designed for under normal filling. The brimful volume given in the parameters is the physical volume up to the neck. The difference between them is a reserve for the sprayer with its dip tube and for the expansion of the contents when the temperature changes. The dip tube reaches the bottom, so almost the entire filling can be dispensed.

One press releases approximately 0.12 ml, so the whole filling corresponds to approximately 1 600 presses. For tonics and hydrosols, a few presses are enough for the face, so the bottle lasts a long time even with daily use.

Good to know

Before the first filling, wash and rinse the bottle and the sprayer, then disinfect them with isopropyl alcohol or ethanol. Pump clean water through the sprayer first and then alcohol, and let all parts dry completely. Follow the same procedure for every subsequent filling, especially if you change the recipe.

Let the filling cool to room temperature before filling the bottle. PET is not designed for hot filling, and the wall deforms with heat.

The clear walls let light through. Store hydrosols, plant extracts and products with essential oils away from direct sunlight; dark glass is more suitable for sensitive formulations.

The bottle has a 24/410 neck finish. The sprayer can be replaced with another closure with the same neck type; you can find separate closures and other ready-made combinations in the Handymade range. If you make your own combination, check the tightness and dispensing with your specific formulation.

The bottle is made of PET, the sprayer of PP with an aluminium collar. Before disposal, separate the parts and put the plastics into sorted waste collection.

Frequently asked questions