+421 950 333 113info@handymade.store−10 %Shop now

ECO GLITTERS

EcoSparks Allure Series, Gold, 10 g

Pack size10 g100 g

Allure eco glitter gives cosmetics a gold sparkle without plastic. It consists of a mineral powder made of synthetic mica coated with titanium dioxide. full description

AvailabilityIn stock · 93 packs
Product codeFGEA020_10
Batch6814A
Best before11/2028
€3.14incl. VAT€314.00/kg

Lowest price in the last 30 days: €3.14

Product description

Allure eco glitter gives cosmetics a gold sparkle without plastic. It consists of a mineral powder made of synthetic mica coated with titanium dioxide. It is suitable for products for the face, body, lips and nails, both leave-on and rinse-off.

It does not dissolve in the formulation, it only gets dispersed in it. It can therefore be used in both water-based and oil-based formulations.


How the gold sparkle is created

The effect comes from thin platelets of synthetic mica. Each one is coated with a layer of titanium dioxide that reflects light, so the platelet sparkles as it moves. Mica makes up 55–80% of the powder and titanium dioxide 20–45%. The warm gold tone is completed by red iron oxide, and the surface treatment also includes tin oxide.

Synthetic mica is not mined, it is produced by chemical synthesis. Compared with natural mica, it is purer and colourless, and shades appear brighter on it.

The particle size determines how the effect looks. Most of the platelets, 85%, measure 50–230 µm. For glitter they are very fine, yet the individual particles can still be seen as separate sparkles. Only pearlescent pigments with smaller particles give a smooth satin sheen without visible dots.


What it is suitable for

  • Lips – lip glosses and lip balms, in which a thick oil or wax base holds the glitter.
  • Face and body – highlighters, sparkling body lotions, body butters, gels and solid perfumes.
  • Nails – incorporation into a nail polish base or into nail decoration products.
  • Rinse-off products – body scrubs and shower gels, provided the pH of the finished product stays within the recommended range.

The glitter is odourless and does not change the fragrance of the product. It contains no nanomaterials and meets the purity criteria for cosmetic dyes, including the heavy metal limits under Annex IV of Regulation (EC) No 1223/2009.


Use in a formulation

The glitter is added during the cooling phase or afterwards to the finished product. This is for ease of incorporation – heat does not harm it. The powder is heat-stable up to 800 °C, so even a melted wax base of a balm will not damage it.

The thickness of the base is decisive. In a thin liquid the platelets sink to the bottom, while in creams, gels, balms and butters they stay dispersed. After adding it, mix the blend thoroughly so that the glitter is distributed evenly.

For thin oils and aqueous solutions, first test the glitter on a small sample. If it settles, a thicker base or a thickened formulation will help.

The recommended pH of the finished product is 6–9. The glitter is not recommended for strongly acidic preparations.

In anhydrous products, bear in mind that the powder binds oil. 100 g of glitter takes up 65–85 g of oil. At a higher usage rate, a balm or butter may thicken and feel drier, and the oil part of the formulation then needs to be adjusted.

The amount is chosen according to how pronounced the effect should be. We recommend testing it on a small amount first.

Do not inhale the powder when weighing and mixing. Use a respirator and eye protection, and wash your hands afterwards.


Frequently asked questions

Is Allure eco glitter soluble in water or oil?
No, Allure eco glitter does not dissolve in water or in oil. It can be dispersed in both, so it is suitable for water-based gels, emulsions and anhydrous balms. As it remains in the form of solid particles, it sinks to the bottom over time in a thin base. A thicker product and thorough mixing keep it evenly distributed.
When should Allure eco glitter be added to a cream or balm?
Allure eco glitter is added during the cooling phase or afterwards to the finished product. In a thickening blend it distributes more evenly and does not sink to the bottom. Heat does not harm it, as the powder is stable up to 800 °C. This phase is recommended for ease of incorporation, not because of heat sensitivity. After adding it, mix the blend thoroughly.
Can Allure eco glitter be used in a lip gloss or lip balm?
Yes, Allure eco glitter is also intended for lip products. It is classed as a cosmetic dye for the face, body, lips and nails and meets the purity criteria under Annex IV of Regulation (EC) No 1223/2009. In a gloss or balm, a thick oil or wax base holds it. At a higher usage rate the product may thicken, because the powder binds oil.
How does Allure eco glitter differ from conventional glitter?
Allure eco glitter consists of a mineral material, while conventional glitter is made from plastic film. It is based on synthetic mica coated with titanium dioxide, and the colour is completed by red iron oxide. Biodegradability does not apply to it as a mineral material. It is very fine, with 85% of the particles measuring 50–230 µm.
What pH is Allure eco glitter suitable for?
Allure eco glitter is recommended for products with a pH of 6–9. It is not recommended for strongly acidic preparations. This applies to water-based gels, emulsions and rinse-off products, for which we recommend checking the pH of the finished product. In anhydrous balms and butters, pH is not measured.

Parameters

INCI
Synthetic Fluorphlogopite, Titanium Dioxide, Iron Oxide Red, Tin Oxide
CAS No.
12003-38-2, 13463-67-7, 1309-37-1, 18282-10-5
EC number
234-426-5, 236-675-5, 215-168-2, 242-159-0
Product colour
Gold
CI number
CI 77891, CI 77491, CI 77861N/A, 77891, 77491, 77861
Country of origin
Spain
Appearance
Powder
Function in formulation
Colorant
Recommended formulation pH range
6,00 – 9,00
Application area
FaceBodyLipsNails
Application type
Leave-onRinse-off
Suitable for
All skin types
Biodegradability
Not applicable
Natural Index (NI ISO 16128)
0,00
Natural Origin Index (NOI ISO 16128)
1,00
Organic content
0 %
Renewable Carbon Content (RCC)
0 %

Product documentation

CoACertificate of Analysis
batch 6814APDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

2 PDF files in one archive

Vlasta20 Aug 2026EN

Verified purchase

Great product, fast delivery, and excellent customer support!