+421 950 333 113info@handymade.store−10 %Shop now

PLASTIC BOTTLES

Brown Plastic Bottle, White Push-Pull, 500 ml

Pack size500 ml1 l

This amber PET plastic medicine bottle with a capacity of 500 ml and a white push-pull cap lets you dispense liquid cosmetics without unscrewing the closure. full description

AvailabilityIn stock · 277 pcs
Product codeO28PH500-OVV28PN2
€0.82incl. VAT

Lowest price in the last 30 days: €0.82

Save €0.02 with this set

Volume pricing
1–371 pcs€0.82Your price
372–1115 pcs€0.77−6 % · 1× plato
1116–5207 pcs€0.71−13 % · 3× plato
from 5208 pcs€0.63−23 % · 14× plato

Total for 1 pcs: €0.82

Quantities add up across all combinations of this bottle.

Product description

This amber PET plastic medicine bottle with a capacity of 500 ml and a white push-pull cap lets you dispense liquid cosmetics without unscrewing the closure. The amber colour of the plastic dampens light and helps protect contents sensitive to sunlight. The bottle is light and unbreakable, so it suits the bathroom, the shower and travel. The set is intended mainly for shower gels, shampoos, liquid soaps and conditioners of thinner consistency, that is, for products that are used often and need a one-handed closure.

The set consists of two parts with a 28/410 neck finish, which fit together without any further adjustment. Both are declared suitable for contact with cosmetic products; declarations of conformity are available with the product.


How the push-pull closure works

The top part of the cap opens when pulled up and closes when pushed down. The contents flow out through the opening in the centre when the bottle is squeezed, and the flow is controlled by how hard you squeeze. Once the cap is pushed back down, the bottle stays closed, so it can also be laid down on its side.

For products dispensed in larger amounts at a time, this method is more convenient than unscrewing the cap with wet hands. With very thick gel or cream products, the contents are harder to squeeze out and dispensing is less precise.

Test the flow through the opening and the force needed to squeeze the bottle with your own formulation before filling the whole batch. For thicker products, adjusting the viscosity or using a different type of closure with the same thread helps.


What the set is suited for

  • Shower gels and bath foams – liquid rinse-off products of low to medium viscosity, where a larger amount is dispensed straight into the palm or into the water.
  • Shampoos and liquid conditioners – the 500 ml size corresponds to a standard family pack, and the amber plastic protects plant extracts or oils in the formulation from light.
  • Liquid soaps for hands and body – for a bathroom or workshop where the bottle is opened often and wet hands make handling a screw cap difficult.
  • Massage and body oils – liquid oil blends dispense smoothly from the push-pull opening. For blends with a higher proportion of essential oils, we recommend checking how the plastic behaves with the specific recipe.
  • Household cleaning products – liquid surfactant-based preparations, for example washing-up liquid or all-purpose cleaner. Both the bottle and the cap are of technical grade.

Nominal volume and filling

Nominal volume is the amount the packaging is designed for under normal filling. Total brimful volume is the physical volume up to the neck and is usually somewhat larger. The difference between them is a reserve for the closure and for the expansion of the contents with temperature changes, so the bottle is filled to the nominal volume, not to the brim. With foaming products, for example shower gels, also leave a reserve so that the contents do not foam through the closure opening when the bottle is squeezed.


Good to know

Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. This also applies to repeated use. When refilling, rinse the push-pull cap opening thoroughly so that no residue of the previous contents remains in it.

The PET bottle is not designed for filling with hot contents or for storage in warm conditions. Let emulsions, gels and liquid soaps cool to room temperature before pouring, otherwise the bottle may deform. For formulations with a high proportion of essential oils or solvents, test how the plastic behaves over time on one trial bottle.

Only the bottle has a certificate for direct food contact; the push-pull cap does not. The set as a whole is therefore intended for cosmetic and technical products, not for food.

The bottle is made of PET and the cap of PP; separate them before disposal. You will find closures with the same neck type and other ready-made bottle and closure combinations in the Handymade range. With your own combination, check the tightness and dispensing with the specific formulation.


Frequently asked questions

Is a 500 ml plastic bottle with a push-pull cap suitable for shower gel?
Yes, shower gels and other liquid rinse-off products are the main use of this set. The push-pull cap opens by pulling and the contents are dispensed by squeezing the bottle, which is more convenient in the shower than unscrewing a cap. With thicker gels, check beforehand that the contents dispense smoothly enough through the opening.
Does the amber PET bottle protect the contents from light?
Yes, the amber colour of the plastic reduces light penetration and helps slow down changes caused in the contents by sunlight. It therefore suits products with vegetable oils, extracts or colouring ingredients. For long-term storage, still keep the bottle out of direct sunlight and at a temperature of 5–30 °C.
Can a bottle with a push-pull cap be reused?
Yes, both the bottle and the cap can be refilled after washing. Before each filling, wash both parts, disinfect them with isopropyl alcohol or ethanol and let them dry. Rinse the push-pull cap opening more thoroughly so that no residue of the previous product remains in it. Do not pour hot contents into a PET bottle; let them cool to room temperature first.
Is the bottle and push-pull cap set suitable for contact with food?
No, the set as a whole is not approved for food contact. Only the amber bottle has a certificate for direct food contact; the push-pull cap has a declared cosmetic and technical grade. The whole set is therefore intended for cosmetic products and liquid household preparations.
What thread does this bottle have, and can another closure be used?
The bottle and the cap both have a 28/410 thread, which is one of the common neck types. Other closures with the same thread type can also be used on the bottle, for example a sprayer or a dispensing pump, depending on how the product is to be dispensed. With your own combination, check the tightness and behaviour of the closure with the specific contents.

Parameters

Plastic bottle, brown, 500 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
500
Diameter
73,6 mm
Thread type
28/410
Height
160 mm
Product material
PETPlastic

Plastic push-pull cap 28/410

Product colour
White
Country of origin
European Union
Diameter
30 mm
Thread type
28/410
Height
34 mm
Product material
PPPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, brown, 500 ml · O28PH500PDF ↓
Plastic push-pull cap 28/410 · OVV28PN2PDF ↓
PDSProduct Data Sheet
Plastic bottle, brown, 500 ml · O28PH500PDF ↓
Plastic push-pull cap 28/410 · OVV28PN2PDF ↓
DrawingTechnical drawing
Plastic push-pull cap 28/410 · OVV28PN2PDF ↓
TDSTechnical Data Sheet
Plastic bottle, brown, 500 ml · O28PH500PDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.