PLASTIC BOTTLES
Clear Plastic Bottle, Black Disc Top, 100 ml
Pack size100 ml150 ml200 ml250 ml500 ml
Clear plastic bottle, black disc top, 100 ml is a complete set: a bottle made of PET and a black disc top cap with a 24/410 neck finish. full description
Lowest price in the last 30 days: €0.75
Total for 1 pcs: €0.75
Quantities add up across all combinations of this bottle.
Product description
Clear plastic bottle, black disc top, 100 ml is a complete set: a bottle made of PET and a black disc top cap with a 24/410 neck finish. The clear wall lets you see the contents and how much is left, and the lightweight plastic suits the bathroom as well as travel. The 100 ml volume is right for shower gels, shampoos, liquid soaps, body lotions and lighter creams, that is, liquid to medium-thick products that are dispensed through the opening in the cap by squeezing the bottle. The set is declared suitable for contact with cosmetics, and you will find the declaration of conformity with the product.
How dispensing through a disc top works
The disc top cap has a tilting disc in its top surface. Pressing one side opens the dispensing opening, and pressing the other side closes it again. It opens with one hand, which is useful with wet hands in the shower or when dispensing quickly at a workbench. The contents flow out when you tilt the bottle and squeeze it gently, and the amount is controlled by how hard you squeeze.
Products with a liquid to medium-thick consistency are the best fit for dispensing through a disc top. Thick creams and butters are difficult to push through a small opening. Very thin water-based products, such as toners, may run out faster than you would like when the bottle is tilted. For borderline consistencies, we recommend testing the dispensing with the finished formulation before you fill a whole batch.
Nominal and total volume
The bottle has a nominal volume of 100 ml. This is the amount it is designed for in normal filling. The brimful volume given in the parameters is the physical volume of the bottle up to the neck. The difference between them is a reserve for the cap and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim, otherwise the contents will be pushed into the thread when you close the bottle and the cap will not seal.
Let emulsions and gels cool to room temperature before filling. The bottle must be protected from heat, and warm contents change in volume as they cool, so the level in the bottle will drop.
Good to know
- Preparation before the first filling – wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely.
- Heat and chemicals – protect the bottle from heat and do not expose it to aggressive chemicals. For formulations with a high proportion of essential oils, solvents or alcohol, fill one bottle first and check whether the wall softens, deforms or changes in appearance.
- Leak-tightness – every combination of packaging and formulation behaves differently. Place the filled bottle on its side and leave it for a few days to find out whether the product leaks through the disc top.
- Recycling – the bottle is made of PET and the cap of PP, and both materials belong in sorted plastic waste. Empty the packaging and unscrew the cap before disposal.
When filling thin products, keep the disc top closed until the cap is fully screwed on. An open disc easily lets the contents out when you handle a full bottle.
Frequently asked questions
Parameters
Clear plastic bottle, 24/410 neck, 100 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 100
- Brimful capacity
- 105 ml
- Diameter
- 40 mm
- Thread type
- 24/410
- Height
- 106 mm
Plastic cap, 24/410, disc top, black
Product documentation
Learn how to work with it
From our blogVerified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




























































