+421 950 333 113info@handymade.store

Spend over €100 for discounted shipping!

PLASTIC BOTTLES

Clear Plastic Bottle 24/410, Black Disc Top, 500 ml

Pack size100 ml150 ml200 ml250 ml500 ml

The clear PET bottle with a volume of 500 ml and a black disc top cap is a ready-to-fill set for liquid and gel cosmetic products that are dispensed often and in larger amounts. full description

AvailabilityIn stock · 571 pcs
Product codeO24PP500-OVV24PC2
€0.85incl. VAT

Lowest price in the last 30 days: €0.85

Volume pricing
1–1319 pcs€0.85Your price
1320–2639 pcs€0.76−10 % · 1× plato
2640–5279 pcs€0.72−15 % · 2× plato
from 5280 pcs€0.64−25 % · 4× plato

Total for 1 pcs: €0.85

Quantities add up across all combinations of this bottle.

Product description

The clear PET bottle with a volume of 500 ml and a black disc top cap is a ready-to-fill set for liquid and gel cosmetic products that are dispensed often and in larger amounts. The clear plastic shows the colour of the contents and how much product is left in the bottle. PET is light and does not break when dropped, so it holds up well in the bathroom or shower. The volume suits shower gels, shampoos, conditioners, liquid soaps, body lotions and other products for everyday use.

The disc top cap opens by pressing one side of the disc. The product is then dispensed by squeezing or tilting the bottle, and the opening is closed by pressing the other side of the disc. Nothing needs to be unscrewed, dispensing works with one hand and the bottle stays closed while you use it. The set is declared suitable for contact with cosmetics. It is not intended for food.


Key benefits

  • Clear PET – you can see the colour, consistency and remaining amount of product, which also helps presentation with coloured gels and emulsions.
  • Light and unbreakable material – compared with glass it saves weight in transport and there is no risk of breakage on a wet floor.
  • Disc top dispensing – opens and closes with a single press, without unscrewing and without putting the cap aside.
  • 24/410 neck finish – a common thread type, for which you will also find other closures and ready-made bottle and closure combinations in the Handymade range.

Usage

The disc top works best with contents of medium to higher viscosity: shower gels, shampoos, conditioners, liquid soaps, body lotions, massage gels or liquid laundry and household cleaning gels. The product flows out when the bottle is squeezed and the flow stops once the pressure is released.

Thinner liquids, such as toners, hydrosols or facial lotions, run out quickly through an open disc and are difficult to dispense in drops. For such products a fine mist sprayer or a pump with the same neck finish is more suitable. If you make your own combination of bottle and closure, we recommend checking the tightness and dispensing with your specific formulation.

Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely, so that no moisture remains inside the packaging.


Good to know

The nominal volume is the volume the bottle is designed for in normal filling. The brimful volume is the physical volume up to the neck and is usually larger. The difference provides a reserve for the closure and for the expansion of the contents with changes in temperature. The bottle should therefore be filled to the nominal volume, not to the brim, otherwise it may overflow when closing and push the contents out through the disc.

PET is not intended for filling with hot contents. Let emulsions, gels and soaps cool to room temperature before filling, as heat may deform the wall of the bottle. Do not expose the bottle to aggressive chemicals. For products with a higher proportion of essential oils or solvents, we recommend testing how the plastic behaves on a small sample first.

After thorough washing and disinfection, the bottle can be reused. After each cycle, unscrew the disc top cap from the bottle and also clean the channel of the opening, where product residues remain.

Clear plastic does not protect the contents from light. Store products with essential oils, plant extracts or sensitive active ingredients away from direct sunlight, or choose opaque or dark packaging.

The bottle is made of PET with the material code PET 1 and the cap of polypropylene with the code PP 5. Both parts belong in sorted plastic waste; before disposal it is enough to rinse and separate them.


Frequently asked questions

Is the clear 500 ml PET bottle suitable for products with essential oils?
Yes, at the usual content of essential oils in a finished cosmetic product, a PET bottle is used as standard. With a higher proportion of essential oils or solvents, we recommend testing how the plastic behaves on a small sample first. In addition, clear plastic does not block light, so store products with sensitive ingredients away from the sun or choose dark packaging.
How does the disc top cap work and which products is it suitable for?
The disc top opens by pressing one side of the disc and closes by pressing the other side, without unscrewing. The contents are dispensed by squeezing or tilting the bottle. It works best with shower gels, shampoos, liquid soaps and body lotions. Very thin liquids run out quickly through it, and a pump or fine mist sprayer with the same neck finish is more suitable for them.
How much product actually fits into the 500 ml bottle?
The bottle is filled to the nominal volume of 500 ml, not to the brim. The space above this level serves as a reserve for the cap and for the expansion of the contents with changes in temperature. If the bottle is filled right up to the neck, the product overflows when closing and is pushed uncontrollably out through the disc opening when the bottle is squeezed.
Can warm cream or soap be filled into a PET bottle?
No, a PET bottle is filled only with contents that have cooled down. At higher temperatures the plastic wall may deform and the bottle loses its shape. Let emulsions, gels and liquid soaps cool to room temperature before filling and only then fit the disc top cap.
Can I reuse the PET bottle with the disc top cap?
Yes, after thorough washing, disinfection with isopropyl alcohol or ethanol and complete drying, both the bottle and the cap can be used again. Also clean the channel of the opening in the cap, where residues of the previous product remain. If the plastic is cloudy or scratched, or the disc does not close tightly, choose new packaging instead.
Do closures other than the disc top also fit this bottle?
Yes, the bottle has a 24/410 neck finish, for which the Handymade range also includes other closures and ready-made bottle and closure combinations. If you make your own combination, we recommend checking the tightness and dispensing with your specific formulation, because thinner and thicker products behave differently in each closure.

Parameters

Plastic bottle, clear 24/410, 500 ml

Product colour
Clear
Country of origin
European Union
Nominal capacity
500
Diameter
67 mm
Thread type
24/410
Height
177 mm
Product material
PETPlastic

Plastic cap, 24/410, disc top, black

Product colour
Black
Country of origin
China
Diameter
27,3 mm
Thread type
24/410
Height
27,6 mm
Product material
PPPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear 24/410, 500 ml · O24PP500PDF ↓
PDSProduct Data Sheet
Plastic bottle, clear 24/410, 500 ml · O24PP500PDF ↓
Plastic cap, 24/410, disc top, black · OVV24PC2PDF ↓
Download all (ZIP)

3 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.