PLASTIC BOTTLES
Clear Plastic Bottle, Black Disc Top, 200 ml
Pack size100 ml150 ml200 ml250 ml500 ml
A clear PET bottle with a volume of 200 ml and a black disc top cap makes a ready-to-use packaging set for liquid and medium-thick cosmetic products that are dispensed by squeezing. full description
Lowest price in the last 30 days: €0.71
Total for 1 pcs: €0.71
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a volume of 200 ml and a black disc top cap makes a ready-to-use packaging set for liquid and medium-thick cosmetic products that are dispensed by squeezing. The clear plastic shows the colour and the remaining amount of the contents. The bottle is light and does not break when dropped, so it holds up in the shower, in the bathroom and while travelling. The 200 ml volume matches the usual pack size of shower gel, shampoo, conditioner, body lotion or liquid hand soap.
Both parts are declared as suitable for contact with cosmetic products, and the declaration of conformity is available with the product.
How the set works
The disc top is opened by pressing one side of the disc, which releases a small dispensing opening. The contents are pushed out by gently squeezing the walls of the bottle, and after use the disc is pressed back with the same movement. There is therefore no need to screw the closure shut, which you will appreciate with wet hands and in everyday use.
- Clear bottle – the contents are visible, so the customer can see the colour of the product and how much is left.
- PET – low weight and resistance to breakage.
- Black disc top – a closure that contrasts with the clear body of the bottle, one-handed dispensing, and the opening stays closed after the disc is pressed down.
- 24/410 neck finish – a common neck size, so the bottle can also be combined with other closures from the Handymade range.
What contents suit it
The disc top works best with contents that flow out freely when the bottle is squeezed but do not run on their own when the bottle is standing. The set is therefore suited above all to shower gels, shampoos, conditioners, liquid soaps and body lotions. Very thin liquids, for example toners or hydrosols, may leak through the opening and are better suited to a sprayer or a dropper. Thick creams and butters are difficult to squeeze out through a disc top, so a jar or a pump is more suitable for them.
Clear plastic lets light through and does not protect the contents from it. Store light-sensitive products away from direct sunlight, or choose coloured packaging.
Nominal and total volume
The nominal volume is the amount the bottle is designed for in normal filling. The total brimful volume, given in the parameters, is the physical volume up to the neck. The difference between them forms a reserve for the cap and for the expansion of the contents when the temperature changes. The bottle is therefore filled up to the nominal volume. If it were filled to the brim, the contents would be pushed out through the neck when closing and the disc top might not seal.
Before the first filling, wash the bottle and the cap, disinfect them with ethanol or isopropyl alcohol and let them dry completely.
Good to know
PET does not tolerate high temperatures, so finished emulsions and gels are filled into the bottle only after they have cooled. The packaging should not be exposed to aggressive chemicals. For products with a higher proportion of essential oils, solvents or alcohol, we recommend checking in advance how the bottle behaves with the specific formulation, for example with a test bottle left to stand for several weeks. It is also worth checking the tightness of the disc top with thinner contents.
The set can be used repeatedly, as long as the bottle is not deformed and the disc returns to the closed position after being pressed. When changing the product, wash the packaging thoroughly and disinfect it again.
The set is not intended for contact with food. Do not fill it with homemade oils, syrups or infusions; use it for cosmetics.
The bottle is made of PET and the cap of PP. Both materials belong in plastic waste; separate them before recycling.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 200 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 200
- Brimful capacity
- 214 ml
- Diameter
- 47 mm
- Thread type
- 24/410
- Height
- 146,95 mm
Plastic cap, 24/410, disc top, black
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.































































