+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Plastic bottle, white, plastic PushLock cap, white, 100 ml

Pack size100 ml150 ml

A white PET bottle with a volume of 100 ml and a plastic PushLock cap with a 24/410 neck finish make a ready-to-fill set for liquid and semi-liquid cosmetic products. full description

AvailabilityIn stock · 17 pcs
Product codeO24PB100-OVV24PB6
€0.67incl. VAT

Lowest price in the last 30 days: €0.67

Volume pricing
1–119 pcs€0.67Your price
120–1079 pcs€0.64−5 % · 1× plato
1080–5039 pcs€0.57−15 % · 9× plato
from 5040 pcs€0.50−25 % · 42× plato

Total for 1 pcs: €0.67

Quantities add up across all combinations of this bottle.

Product description

A white PET bottle with a volume of 100 ml and a plastic PushLock cap with a 24/410 neck finish make a ready-to-fill set for liquid and semi-liquid cosmetic products. The white wall dims light, which helps with contents containing oils, extracts or fragrances that lose their properties more quickly in light. PET is lightweight and does not break when dropped, so the set is also suitable for travel packs and products that the customer carries in a bag.

The 100 ml volume corresponds to common sizes of toners, face and body lotions, cleansing gels, body oils, shampoos and shower gels in a smaller or travel-size pack. The cap screws onto the neck, and the bottle can be opened and closed repeatedly.


What the set is suitable for

  • Toners and facial waters – water-based and hydrosol-based products in everyday and travel packs.
  • Body and face lotions – lighter emulsions that can be squeezed or poured out of the bottle.
  • Cleansing gels, shampoos and shower gels – rinse-off products in a smaller pack, for example for trying out a formulation or as a sample.
  • Body and massage oils – vegetable oils and oil blends.

Nominal and total volume

The nominal volume is the amount the bottle is designed for in normal filling. The total volume to the brim, stated in the parameters, is the physical volume up to the neck. The difference between them provides room for the cap, for the air above the liquid and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim. If you fill to the neck, the contents will be pushed out when closing and the cap may not seal.

With your first batch, fill one bottle, close it and leave it lying on its side and upside down. You will find out whether the cap seals with your specific formulation and whether the contents leak.


Good to know

The set is declared as suitable for cosmetic contact, and the declaration of conformity is included with the product. Only the bottle has a separate certificate for direct food contact; the PushLock cap does not have one. The set as a whole is therefore intended for cosmetics and is not to be used for food.

Do not use this set with the PushLock cap for homemade oils, syrups or herbal infusions. Food use is only possible with a bottle fitted with a closure that has its own certificate for food contact.

Before the first filling, we recommend washing the bottle and the cap, disinfecting them with isopropyl alcohol or ethanol and letting them dry completely. Residual water in the packaging shortens the shelf life of water-based products. After thorough washing, the bottle can be reused. Replace the cap if it stops sealing.

PET tolerates water-based and emulsion contents and common cosmetic oils. Concentrated essential oils, fragrance compositions in high concentration and some solvents may damage or cloud the plastic over time. For such contents, we recommend trying a sample and observing the bottle wall and neck for several weeks. Do not fill the bottle with hot product; let the contents cool before filling.

The bottle neck has a 24/410 neck finish. You will find other closures with the same neck type and ready-made bottle-plus-closure combinations in the Handymade range. If you make your own combination, check the seal, the dispensing and the behaviour of the packaging with your specific formulation.

The bottle is made of PET and the cap of PP. Both materials belong in plastic recycling. Before disposal, it is enough to rinse the bottle and unscrew the cap.


Frequently asked questions

Is the white plastic bottle with a PushLock cap suitable for food?
No, the set as a whole is not approved for food contact. Only the white 100 ml PET bottle has a certificate for direct food contact; the PushLock cap does not have one. The set is declared as suitable for cosmetic contact and is used for toners, lotions, gels and oils intended for the skin.
Does the white PET bottle protect the contents from light?
Yes, the white wall of the bottle dims light. It is therefore suitable for vegetable oils, extracts and products with fragrances that are less stable in light. It does not protect against heat, so store the bottle away from direct sunlight and heat sources to prevent the contents from overheating.
How much can actually be filled into the 100 ml bottle?
The bottle is filled to the nominal volume of 100 ml, not to the brim. The total volume to the brim is larger and you will find it in the parameters. The space above the liquid is for the cap, the air and the expansion of the contents when the temperature changes. If you fill up to the neck, the contents will be pushed out when closing and the closure may leak.
Can the bottle with a PushLock cap be reused?
Yes, after thorough washing and disinfection with isopropyl alcohol or ethanol, the PET bottle can be used again. It must be completely dry before the next filling. Check the cap and replace it with a new one with the same 24/410 neck finish if it loses its seal.
Can I fill the PET bottle with oils containing essential oils?
At typical essential oil levels, yes; at a high concentration, fill a test sample first. The PET bottle tolerates common vegetable oils and emulsions. A high proportion of essential oils, fragrance compositions or solvents may soften, cloud or deform the plastic over time. Observe the test sample for several weeks, paying attention to the bottle wall and the seal of the cap.
Does a closure other than the PushLock cap fit the bottle?
Yes, the bottle has a standard 24/410 neck and all closures with the same thread type can be used on it. You will find ready-made bottle-plus-closure combinations and closures sold separately in the Handymade range. If you make your own combination, check the seal with your specific contents, ideally by test-filling one bottle.

Parameters

White plastic bottle, 24/410, without cap, 100 ml

Product colour
White
Country of origin
India
Diameter
44 mm
Nominal capacity
100
Brimful capacity
117 ml
Thread type
24/410
Height
98 mm
Product material
PETPlastic

Plastic PushLock cap, 24/410, white

Product colour
White
Country of origin
European Union
Diameter
27,4 mm
Thread type
24/410
Height
35,6 mm
Product material
PPPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
White plastic bottle, 24/410, without cap, 100 ml · O24PB100PDF ↓
Plastic PushLock cap, 24/410, white · OVV24PB6PDF ↓
PDSProduct Data Sheet
White plastic bottle, 24/410, without cap, 100 ml · O24PB100PDF ↓
Plastic PushLock cap, 24/410, white · OVV24PB6PDF ↓
DrawingTechnical drawing
White plastic bottle, 24/410, without cap, 100 ml · O24PB100PDF ↓
Plastic PushLock cap, 24/410, white · OVV24PB6PDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.