+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

White Plastic Bottle, Black Lotion Pump With Matte Gold Collar, 100 ml

Pack size100 ml150 ml200 ml250 ml300 ml

The white plastic bottle with a volume of 100 ml and a black and gold matte pump is ready-made packaging for liquid soaps, face lotions, serums and other products that are dispensed in small amounts. full description

AvailabilityIn stock · 16 pcs
Product codeO24PB100-OVD24CZM
€1.23incl. VAT

Lowest price in the last 30 days: €1.15

Volume pricing
1–199 pcs€1.23Your price
200–999 pcs€1.13−8 %
1000–4999 pcs€1.07−13 %
from 5000 pcs€0.96−22 %

Total for 1 pcs: €1.23

Quantities add up across all combinations of this bottle.

Product description

The white plastic bottle with a volume of 100 ml and a black and gold matte pump is ready-made packaging for liquid soaps, face lotions, serums and other products that are dispensed in small amounts. The opaque white bottle made of PET limits the access of light to the contents, and the pump dispenses the product when pressed, without scooping it out with your fingers. The set is declared suitable for contact with cosmetics; only the bottle has a separate certificate for direct food contact.


What the set is suitable for

The pump handles liquid and medium-viscosity products that can be drawn up through the tube. One press dispenses approximately 1.3 ml, which corresponds to a usual single-use portion of face lotion or liquid soap.

  • Liquid soaps and cleansing gels – the contents are drawn up directly and dispensed cleanly, without your hands touching the product.
  • Face and body lotions – lighter emulsions pass through the tube without problems; we recommend testing thicker creams before filling.
  • Serums and fluids – the opaque bottle helps with ingredients that are sensitive to light.
  • Hair and body oils – with a higher proportion of essential oils, it is worth checking first how the packaging behaves.

Very thick creams, balms and products with coarser particles, for example scrubs, will not pass through the tube or will clog the pump. For such products, a jar or a bottle with a different closure is more suitable.


Volume and filling

The nominal volume of 100 ml is the volume the bottle is intended for under normal filling. The total volume up to the brim is larger. The difference provides a reserve for the pump tube and for the expansion of the contents when the temperature changes. The bottle should therefore be filled up to the nominal volume, not up to the neck. From an overfilled bottle, the contents are pushed out around the thread when the pump is screwed in.

After filling, first screw in the pump and then “prime” it by pressing it several times. The first doses are often uneven until the tube and the pump chamber fill up.


Good to know

Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water in the tube can dilute the first doses and shorten the shelf life of unpreserved products.

The PET bottle is light, unbreakable and opaque, so it is also suitable for the bathroom or for travelling. The material should not be exposed to aggressive chemicals. For formulations with a higher proportion of alcohol or essential oils, we recommend a compatibility test on one piece and observation over several weeks.

The pump is a mechanical closure made up of plastic, metal and glass parts. When reusing it, rinse it with warm water, pump clean water through it and let it dry, so that no residues of the previous contents remain in the mechanism. The PET bottle is sorted as plastic for recycling; the pump, because it is made of several materials, is sorted according to local collection rules.

The set as a whole is intended for cosmetic products. Only the bottle itself has a certificate for direct food contact; the pump does not. Therefore, do not use this combination for homemade oils or syrups.

Closures with the same neck type and other ready-made bottle and closure combinations can be found in the Handymade range. For your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.


Frequently asked questions

Is the white plastic bottle with a pump suitable for cream?
Yes, if the cream is fluid enough to be drawn up through the tube. Light and medium-viscosity emulsions, face lotions and fluids are dispensed by the pump without problems. Thick creams, butters and balms will not pass through it, and the mechanism may become clogged. With a thicker formulation, we recommend filling one bottle as a test and checking the dispensing before filling larger quantities.
How much cream does the pump dispense per press?
One full press of the pump dispenses approximately 1.3 ml of the contents. The actual amount depends on the viscosity of the product and on whether the pump chamber is fully primed. With thinner contents the dose tends to be more accurate, while with thicker ones it may be smaller. The first presses after filling serve only to prime the pump and are usually incomplete.
Does the white plastic bottle protect the contents from light?
Partly, yes. White opaque PET lets through less light than a clear bottle, so it helps with products containing oils and active ingredients that are sensitive to light. However, it is not a substitute for dark glass or for storage away from direct sunlight. For light-sensitive ingredients, we recommend storing the bottle in the shade and protecting the contents with a suitable formulation as well.
Can I fill the plastic pump bottle with alcohol-based toners or essential oils?
Only after a compatibility test. The PET bottle should not be exposed to aggressive chemicals, and the pump contains seals whose behaviour with a high proportion of alcohol or essential oils needs to be checked. With such contents, fill one piece and observe both the bottle and the pump for several weeks. Pure essential oils do not belong in this packaging.
Why should the 100 ml bottle not be filled up to the brim?
The bottle is filled up to the nominal volume of 100 ml, because it needs free space for the pump tube and for the expansion of the contents when the temperature changes. The nominal volume is the amount the packaging is intended for under normal filling. The total volume up to the brim is larger. If the bottle is overfilled, the contents are pushed out around the thread when the pump is screwed in.

Parameters

White plastic bottle, 24/410, without cap, 100 ml

Product colour
White
Country of origin
India
Diameter
44 mm
Nominal capacity
100
Brimful capacity
117 ml
Thread type
24/410
Height
98 mm
Product material
PETPlastic

Plastic dispenser, 24/410, black-gold, matte, 220 mm

Product colour
BlackGold
Country of origin
China
Diameter
45 mm
Thread type
24/410
Height
40 mm
Tube length
220 mm
Dose
1,3 ml

Product documentation

PPWRPackaging Declaration (PPWR)
White plastic bottle, 24/410, without cap, 100 ml · O24PB100PDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
PDSProduct Data Sheet
White plastic bottle, 24/410, without cap, 100 ml · O24PB100PDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
DrawingTechnical drawing
White plastic bottle, 24/410, without cap, 100 ml · O24PB100PDF ↓
Plastic dispenser, 24/410, black-gold, matte, 220 mm · OVD24CZMPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.