PLASTIC BOTTLES
Rounded Clear Plastic Bottle, Black Disc Top, 200 ml
Pack size100 ml150 ml200 ml300 ml500 ml
The clear PET bottle with a black disc top cap is packaging for liquid and semi-liquid cosmetic products that are dispensed straight from the bottle without unscrewing the cap. full description
Lowest price in the last 30 days: €0.84
Total for 1 pcs: €0.84
Quantities add up across all combinations of this bottle.
Add 83 more pcs and the price drops to €0.79/pc.
Product description
The clear PET bottle with a black disc top cap is packaging for liquid and semi-liquid cosmetic products that are dispensed straight from the bottle without unscrewing the cap. The 200 ml volume matches the usual pack size for shower gel, shampoo, conditioner, body lotion or liquid hand soap. The clear material shows the colour and amount of the contents, and the plastic is lightweight and does not break when dropped, so the bottle holds up in the shower, in the bathroom and while travelling.
The cap opens by pressing one side of the disc, the contents are pushed out through a small opening by gently squeezing the bottle, and pressing the disc back down closes the outlet. Dispensing is quick, works with one hand and needs no separate closure that could get lost. The set is declared suitable for contact with cosmetics. It is not declared for contact with food and is intended for cosmetic use only.
What the set is suitable for
- Rinse-off cosmetics – shower gels, shampoos, conditioners, bubble baths and liquid soaps. With these consistencies the disc top dispenses smoothly and does not drip after closing.
- Body lotions and lighter emulsions – contents with low to medium viscosity are easy to squeeze out of the bottle. A thick cream or balm will not pass through the small opening, so a jar or container is more suitable for such consistencies.
- Cleansing and make-up removal products – micellar waters and cleansing gels that are dispensed directly onto the hand or a cotton pad.
- Massage and body oils – the clear bottle shows the colour of the oil. For light-sensitive products, bear in mind that clear plastic does not protect the contents from light.
Volume and filling
The nominal volume of 200 ml is the volume the bottle is designed for in normal filling. The brimful capacity listed in the parameters is the physical volume up to the neck. The difference is a reserve for the cap and for the expansion of the contents when the temperature changes. Fill the bottle to the nominal volume, not to the brim. An overfilled bottle overflows when closed and dispenses more than needed on the first squeeze.
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the neck or in the outlet of the disc top needlessly burdens the preservative system of the product.
Good to know
Heat and hot filling. Do not fill the bottle with hot contents. Let the product cool to room temperature before filling, and do not store the finished pack near a heat source or in direct sunlight.
Essential oils and solvents. Do not expose the packaging to aggressive chemicals. For fragranced oils, products with a high proportion of essential oils or with a higher alcohol content, we recommend checking the tightness and behaviour of the bottle with your specific formulation before you fill the whole batch.
Light. Clear packaging lets light through. Formulations with sensitive ingredients, for example vegetable oils with a higher proportion of unsaturated fatty acids or vitamin C, are better suited to an amber or opaque bottle, or to a box.
Viscosity of the contents and the outlet. The opening of the disc top is small. If the product is difficult to squeeze out, the consistency of the contents or the closure needs to change. For thick textures, choose a different type of closure with the same 24/410 neck finish or different packaging. You can find other closures with this neck type and ready-made combinations in the Handymade range.
When reusing the packaging, check the outlet of the disc top. Dried product residues in the opening or under the disc impair the seal and may contaminate the new contents. Wash the cap in warm water and reuse it once it is completely dry.
Recycling. The bottle is made of PET and the cap of polypropylene; both materials are sorted as plastic. Before disposal, it is enough to empty and rinse the packaging.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 200 ml, without cap
Plastic cap, 24/410, disc top, black
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






























































