Rounded Clear Plastic Bottle, Type B, White Spray With Glossy Gold Collar, 300 ml

A clear PET bottle with a capacity of 300 ml and a mini trigger sprayer is a ready-made set for products applied as a fine spray: facial and body toners, hydrosols, hair sprays, refreshing summer sprays and room fragrances. The packaging is light and unbreakable, so it suits the bathroom, travel and the gym bag. Through the clear plastic you can see the colour of the contents and how much is left. The white sprayer with a glossy gold collar gives a homemade product a neat look without any additional accessories.

The bottle and the sprayer both have a 24/410 neck finish, and both parts are declared suitable for contact with cosmetic products. You will find the declaration of conformity with the product.

What the set is suitable for

• Toners and hydrosols – watery, low-viscosity liquids pass through the sprayer without any problem and disperse into a fine mist.
• Hair sprays – a volume of 300 ml is enough for several weeks of daily use, for example with sea salt sprays or liquid leave-in conditioners.
• Body and refreshing sprays – light water-alcohol formulations with solubilised essential oils.
• Room and fabric sprays – water-based sprays with solubilised fragrance for freshening a room or linen.
• Working solutions in the workshop – spraying alcohol onto the surface of the soap base to prevent soda ash, moistening powder raw materials or disinfecting the work surface.

How the set works

The sprayer draws the liquid up through a tube that reaches the bottom of the bottle and delivers approximately 0.12 ml with each press. After filling and screwing on the sprayer, prime it by pressing the head several times until the tube and the pump fill up. Only then does it deliver an even dose. With the last millilitres of contents, the tube may not reach the liquid level when the bottle is tilted, so hold the bottle upright when spraying.

The mini trigger sprayer is intended for liquids with a water-like consistency. Vegetable oils, thick serums or emulsions would clog the nozzle, and the head would either squirt a jet or become blocked. For such contents, you will find other closures with the same 24/410 neck finish in the Handymade range, as well as ready-made sets with this bottle.

Nominal and total volume

The nominal volume of 300 ml is the amount the bottle is designed for under normal filling. The physical volume up to the neck is larger. The difference is a reserve for the sprayer tube, the air space above the liquid level and any expansion of the contents when the temperature changes. The bottle is therefore filled up to the nominal volume, not to the brim. An overfilled bottle is harder to close when the sprayer is screwed on, and part of the contents may leak out through the thread.

Good to know

Before the first filling, we recommend washing the bottle, disinfecting it with isopropyl alcohol or ethanol and leaving it to dry completely. It is enough to rinse the sprayer with clean water and pump it several times so that any remaining water runs out. Residual moisture in the packaging would dilute the preservative system of the finished product.

PET tolerates common water-based and water-alcohol formulations. With a high proportion of alcohol, undiluted essential oils or solvents, we recommend first filling a small amount and checking after a few days whether the material becomes cloudy, softens or deforms. This also applies to the sealing parts of the sprayer. Do not expose the bottle to heat: hot water may deform it, so always fill it with a product that has cooled down.

The set is intended for cosmetic products. This set does not have a food-contact certificate, so do not use it for homemade syrups or oils.

The bottle is made of PET and, once rinsed, belongs in the plastic recycling. The sprayer combines polypropylene with metal and glass parts, so unscrew it before disposal and dispose of it separately from the bottle.

Frequently asked questions