Rounded Clear Plastic Bottle, White Spray With Glossy Gold Collar, 150 ml

A clear PET bottle with a volume of 150 ml and a white mini trigger sprayer with a glossy gold collar is ready-to-use packaging for products applied as a spray. The clear body lets you see the colour of the contents and how much product is left. The plastic is lightweight and unbreakable, so the bottle is suitable for the bathroom, for carrying in a handbag and for shipping to customers.

The sprayer with a 24/410 neck finish disperses the contents into a fine mist. It is already assembled with the bottle, so there is nothing more to buy and no need to check that the closure fits. The set is declared suitable for contact with cosmetics. Neither the bottle nor the sprayer has a food-contact certificate, so this packaging should not be used for syrups, kitchen oils or herbal infusions intended for consumption.

What the set is suitable for

• Facial toners and hydrosols – thin water-based products pass through the sprayer without problems and spread evenly over the skin.
• Refreshing and setting sprays – face mists, make-up setting sprays or thermal water.
• Hair care sprays – leave-in spray conditioners, sprays with hydrosols and detangling solutions, as long as their consistency is close to water.
• Household sprays – room and fabric fresheners and light water-based cleaning sprays.
• Hand and body sprays – deodorant sprays without thick ingredients, cooling foot sprays and refreshing body sprays.

How to use the packaging

The nominal volume is the volume the packaging is designed for during normal filling. The total volume of the bottle up to the brim is larger, and the difference provides room for the sprayer tube and for the expansion of the contents when the temperature changes. For this reason, fill the bottle to the nominal volume, not to the brim. If you fill it up to the neck, part of the contents will overflow when the sprayer is screwed on and the head will be harder to tighten.

One press of the sprayer dispenses approximately 0.12 ml of product. On first use the head needs to be pressed several times until the tube fills and the spray starts to dispense regularly. The amount per press helps when calculating consumption, for example for a toner, where the customer uses two to three presses at a time.

The sprayer works best with contents that have a water-like consistency or are only slightly thicker. Products containing a thickener, emulsions or oils disperse less well, may spray in a stream instead of a mist or may clog the head. For formulations with higher viscosity, we recommend testing the dispensing on a small sample before filling a whole batch.

Good to know

Clear plastic does not protect the contents from light. Products with light-sensitive active ingredients or with essential oils, which lose their scent faster in light, are better placed in amber or blue glass or in opaque packaging. For toners, hydrosols and sprays without sensitive ingredients, a clear bottle is an advantage because you can see the state of the contents.

PET tolerates water, hydrosols and common water-based formulations. Concentrated essential oils and some solvents may damage or cloud the plastic over time, or cause the packaging to absorb the scent. For products with a higher proportion of essential oils or with solvents, we recommend checking compatibility in the finished formulation. Do not expose the bottle to high temperatures. Hot contents may deform the plastic, so fill the bottle only after the product has cooled to room temperature.

Before the first filling, rinse the bottle and the sprayer tube, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Any residual water or alcohol in the packaging would dilute the product and could compromise its preservation. The packaging can be reused. After emptying, wash, disinfect and dry it again, and pump the sprayer several times with clean water to remove residues of the previous contents from the tube and nozzle.

The bottle is made of PET, which is commonly recycled. The sprayer combines plastic with an aluminium collar and is unscrewed before disposal so that the bottle and the head can be sorted separately. You can find ready-made combinations of bottles with closures, as well as closures with a 24/410 neck finish sold separately, in the Handymade range. If you combine the bottle with a different closure, we recommend checking the leak-tightness, dispensing and behaviour of the packaging with your specific formulation.

Frequently asked questions