+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

GLASS BOTTLES 15 ml

White Glass Bottle, Glossy Silver White Dropper, 15 ml

Pack size10 ml15 ml30 ml100 ml

A white glass medicine bottle with a volume of 15 ml , supplied together with a glossy silver dropper , is closed packaging for small quantities of liquid products that are dispensed by the drop. full description

AvailabilityIn stock · 266 pcs
Product codeO18SB015-OVK18SL056
€1.87incl. VAT

Lowest price in the last 30 days: €1.87

Volume pricing
1–279 pcs€1.87Your price
280–1119 pcs€1.71−8 % · 1× plato
1120–5039 pcs€1.59−15 % · 4× plato
from 5040 pcs€1.40−25 % · 18× plato

Total for 1 pcs: €1.87

Quantities add up across all combinations of this bottle.

Product description

A white glass medicine bottle with a volume of 15 ml, supplied together with a glossy silver dropper, is closed packaging for small quantities of liquid products that are dispensed by the drop. White glass is opaque, so the colour and level of the contents cannot be seen from outside, and direct light does not reach the contents as it does in a clear bottle. It is therefore suitable for face serums, oil serums, blends of essential oils in a carrier oil or concentrates of active ingredients, where precise application of a few drops matters.

The set is declared suitable for contact with cosmetics; you will find the declaration of conformity with the product. Both the bottle and the dropper have an 18/410 neck finish, so the two parts fit together without you having to look for a separate closure.


What it is suitable for

  • Oil serums and oil blends – the small volume corresponds to the amount that is used up in normal use before the oil starts to age.
  • Water-based face serums – the dropper lets you take an exact dose without fingers going back into the bottle.
  • Diluted essential oil blends – for aromatherapy blends in a carrier oil, dispensing by the drop is the most convenient.
  • Samples and test batches – when trying a new formulation, it is enough to fill 15 ml and observe how the product behaves in real use.
  • Alcoholic extracts for cosmetic use – glass does not react with alcohol, but check the tightness of the closure with your specific contents.

Volume and filling

The nominal volume of 15 ml is the volume the bottle is designed to hold when filled normally. The total brimful volume given in the parameters is the physical volume up to the neck. The difference between them leaves room for the glass tube of the dropper, which displaces part of the volume when screwed in, and for the expansion of the contents with changes in temperature. The bottle should therefore be filled to the nominal volume, not to the brim. If it were filled up to the neck, the contents would overflow through the thread after the dropper is fitted and the closure would not seal.

When filling thicker serums or oils, let the contents settle for a while before screwing in the dropper so that air bubbles can escape. The level settles and fitting the dropper does not push the contents out.


Dropper and dispensing

The dropper consists of a glass tube, a silicone bulb and a cap in a glossy silver finish. The tube reaches almost to the bottom of the bottle, so even the last remainder of the contents can be drawn up. Squeezing the bulb draws the contents in, and releasing the pressure lets them out drop by drop. The size of the drop depends on the viscosity of the product. Thin water-based serums form smaller drops, thick oils larger ones. If a formulation relies on an exact number of drops, measure their volume with your specific product.

With blends that have a high proportion of undiluted essential oils or contain solvents, watch whether the bulb softens or changes shape over time, and check the tightness of the closure with your specific blend.


Good to know

Before the first filling, wash the bottle and the dropper, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Remnants of water would cause cloudiness in an anhydrous oil serum and a risk of microbial contamination in a product without preservative.

Glass tolerates heat better than plastic, but hot contents should still not be filled into it. It may crack with a sudden change of temperature, so let the product cool at least to room temperature before filling. Fit the dropper only after cooling, so that no negative pressure forms during cooling that would make dispensing difficult.

The bottle and the dropper are intended for repeated use. After thorough washing and disinfection they can be filled again.

The set does not have a certificate for contact with food. It is used for cosmetic products, not for edible oils, syrups or herbal extracts intended for consumption.

The bottle belongs in glass recycling. Take the dropper apart before disposal: the glass tube goes into glass, the bulb and the cap into plastic or metal according to material.


Frequently asked questions

Does the white medicine bottle protect the contents from light?
Yes, white glass is opaque, so direct light does not reach the contents as it does in a clear bottle. For light-sensitive products, such as oils prone to oxidation or serums with unstable active ingredients, white glass is more suitable than clear glass. For long-term storage, still keep the bottle out of direct sunlight.
How many millilitres fit into a 15 ml medicine bottle with a dropper?
The medicine bottle is filled with 15 ml, which is its nominal volume. The total brimful volume is larger and is given in the parameters, but this reserve is taken up by the glass tube of the dropper and by the space for the expansion of the contents with changes in temperature. If the bottle were filled up to the neck, the contents would run out through the thread after the dropper is screwed in and the closure would not seal.
Is a glass medicine bottle with a dropper suitable for an oil serum?
Yes, for oil serums and blends of vegetable oils, a medicine bottle with a dropper is one of the most common solutions. Glass does not react with oils, the white colour blocks direct light and the dropper dispenses by the drop. Thicker oils form larger drops, so when counting drops in a formulation, take the specific viscosity into account and measure the volume of the drop.
How do you clean the dropper before reuse?
Take the dropper apart and rinse the glass tube and the bulb with warm water and washing-up liquid, then with ethanol or isopropyl alcohol. Let the bulb dry so that no water remains inside. When switching from an oil product to a water-based one, thorough degreasing is necessary, otherwise remnants of oil would turn the new contents cloudy.
Does a closure other than the dropper fit the 15 ml medicine bottle?
Yes, the bottle has an 18/410 neck finish, so any closure with the same type of neck fits it, including ready-made bottle and closure combinations in the Handymade range. With your own combination, check the tightness, the dispensing and the behaviour of the packaging with your specific formulation.

Parameters

Glass bottle, vial, white, 15 ml

Product colour
White
Country of origin
China
Nominal capacity
15
Brimful capacity
19 ml
Diameter
29 mm
Thread type
18/410
Height
63 mm
Product material
Glass

Glass Dropper, Glossy Silver, 56 mm

Product colour
SilverWhite
Country of origin
China
Thread type
18/410
Dropper length
56 mm

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Glass Dropper, Glossy Silver, 56 mm · OVK18SL056PDF ↓
PDSProduct Data Sheet
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Glass Dropper, Glossy Silver, 56 mm · OVK18SL056PDF ↓
DrawingTechnical drawing
Glass bottle, vial, white, 15 ml · O18SB015PDF ↓
Glass Dropper, Glossy Silver, 56 mm · OVK18SL056PDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.