Spend over €100 for discounted shipping!

+421 950 333 113info@handymade.store

PLASTIC BOTTLES

White Plastic Bottle, Black Disc Top, 300 ml

Pack size100 ml150 ml200 ml250 ml300 ml

This white plastic bottle with a black disc top cap, 300 ml, is a ready-made set for liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle. The bottle is made of PET and the cap of PP . full description

AvailabilityIn stock · 202 pcs
Product codeO24PB300-OVV24PC2
€1.04incl. VAT

Lowest price in the last 30 days: €1.04

Save €0.01 with this set

Volume pricing
1–169 pcs€1.04Your price
170–1019 pcs€0.98−5 % · 1× plato
1020–5099 pcs€0.89−14 % · 6× plato
from 5100 pcs€0.79−24 % · 30× plato

Total for 1 pcs: €1.04

Quantities add up across all combinations of this bottle.

Product description

This white plastic bottle with a black disc top cap, 300 ml, is a ready-made set for liquid and medium-thick cosmetic products that are dispensed by squeezing the bottle. The bottle is made of PET and the cap of PP. Both parts have a 24/410 neck finish and are declared suitable for contact with cosmetics. The white opaque wall limits the amount of light reaching the contents. The plastic is light and unbreakable, which you will appreciate in the shower and when shipping products to customers.


What it is suitable for

The 300 ml volume corresponds to a common pack size for everyday products. The set is suitable mainly for:

  • Shower gels and shampoos – a liquid to slightly thicker consistency flows smoothly through the disc top opening, and the bottle returns to its original shape after squeezing.
  • Conditioners and body lotions – medium-thick emulsions can be squeezed out without unscrewing the cap.
  • Liquid soaps and cleansing gels – the opening closes with a single press after use, so any product left on the neck does not dry out quickly.

The disc top is not suitable for thick creams or butters, as the contents are hard to squeeze through the small opening. For very thin liquids, such as toners or oils, we recommend checking the tightness and dispensing with your specific formulation, or choosing a different type of closure.


How to use the set

The disc top cap is opened by pressing the edge of the disc. One side is pushed down and the opposite side lifts up, uncovering the dispensing opening. The contents flow out when you squeeze the bottle, and when you release it the bottle draws air back in. It is closed by pressing the disc the other way, without any twisting. Customers can use it with one hand, even a wet one.

The nominal volume is the volume the bottle is designed for under normal filling. The volume up to the brim of the neck is larger. The difference provides room for the cap and for the expansion of the contents when the temperature changes, so the bottle is filled to the nominal volume, not to the brim. If it is overfilled, part of the contents is pushed out through the thread when the cap is screwed on, and the bottle becomes harder to squeeze.

Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the packaging shortens the stability of water-based products and puts a strain on the preservative system.


Good to know

The set as a whole is intended for cosmetics. The bottle on its own has a certificate for direct food contact, but the disc top cap does not, so we do not recommend the set for food use.

PET is commonly used for both water-based and emulsion products. For formulations with a higher proportion of essential oils, solvents or alcohol, leave the filled bottle to stand for several weeks. Check that the wall does not soften or deform and that the cap continues to seal. Do not expose the packaging to aggressive chemicals.

Once empty, the packaging can be washed and reused. After prolonged use, the disc top collects dried product in the opening, so rinse it thoroughly with warm water when refilling. The bottle and the cap belong in sorted plastic waste, and you should separate them before disposal.

The bottle is not intended for hot filling. Leave emulsions and gels to cool before filling, otherwise the PET wall may deform and the contents will create a vacuum in the bottle as they cool.

You can find closures with the same 24/410 neck finish and other ready-made packaging + closure combinations in the Handymade range. If you combine parts yourself, check the tightness, dispensing and behaviour of the packaging with your specific formulation.


Frequently asked questions

Is the 300 ml plastic bottle with disc top cap suitable for shampoo and shower gel?
Yes, liquid to medium-thick products such as shampoos, shower gels and conditioners are the most common use for this set. The contents are dispensed by squeezing the bottle, and the disc top opening is opened and closed with a single press of the disc. The PET bottle is unbreakable in the shower and returns to its original shape after you release it.
Can the 300 ml plastic bottle set with disc top be used for food?
No, the set as a whole is not approved for food contact. Only the bottle on its own has a certificate for direct food contact, and the black disc top cap does not. The whole set is therefore declared suitable only for cosmetic products, where both parts meet the requirements for contact with cosmetics.
How much product fits into a bottle with a nominal volume of 300 ml?
The bottle is filled to the nominal volume of 300 ml, even though it holds more up to the brim. The difference is a reserve for the cap and for the expansion of the contents when the temperature changes. If you fill the bottle up to the neck, the product gets into the thread when the cap is screwed on and the bottle becomes harder to squeeze.
Does the white plastic bottle protect the contents from light?
Partly. The white opaque wall limits the amount of light reaching the contents and the contents are not visible from outside. For products with light-sensitive ingredients this is an advantage over clear packaging. White plastic does not guarantee complete protection from light, so do not expose filled bottles to direct sunlight.
Can I fill the PET bottle with disc top with oil or a product containing essential oils?
Yes, PET is used for the usual essential oil content in cosmetics, but check compatibility with your specific formulation. For a higher proportion of essential oils, solvents or alcohol, leave the filled bottle to stand for several weeks and check that the wall does not soften and that the cap seals. Pure oils are thin and may drip through the disc top when the bottle is tilted, so check the dispensing as well.

Parameters

Plastic bottle, white, 24/410, without cap, 300 ml

Product colour
White
Country of origin
India
Diameter
58 mm
Nominal capacity
300
Brimful capacity
317 ml
Thread type
24/410
Height
146 mm
Product material
PETPlastic

Plastic cap, 24/410, disc top, black

Product colour
Black
Country of origin
China
Diameter
27,3 mm
Thread type
24/410
Height
27,6 mm
Product material
PPPlastic

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, white, 24/410, without cap, 300 ml · O24PB300PDF ↓
PDSProduct Data Sheet
Plastic bottle, white, 24/410, without cap, 300 ml · O24PB300PDF ↓
Plastic cap, 24/410, disc top, black · OVV24PC2PDF ↓
DrawingTechnical drawing
Plastic bottle, white, 24/410, without cap, 300 ml · O24PB300PDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.