+421 950 333 113info@handymade.store

Spend over €100 for discounted shipping!

PLASTIC BOTTLES

White Plastic Bottle, White Fine Mist Spray, 300 ml

Pack size100 ml150 ml200 ml250 ml300 ml

Plastic bottle, white, white mini trigger sprayer, 300 ml A ready-made spray set: a white PET bottle with a nominal volume of 300 ml and a matching white mini trigger sprayer with a smooth collar, both with a 24/410… full description

AvailabilityIn stock · 202 pcs
Product codeO24PB300-OVR24PB
€1.20incl. VAT

Lowest price in the last 30 days: €1.20

Volume pricing
1–169 pcs€1.20Your price
170–1019 pcs€1.13−5 % · 1× plato
1020–5099 pcs€1.02−15 % · 6× plato
from 5100 pcs€0.90−25 % · 30× plato

Total for 1 pcs: €1.20

Quantities add up across all combinations of this bottle.

Product description

Plastic bottle, white, white mini trigger sprayer, 300 ml

A ready-made spray set: a white PET bottle with a nominal volume of 300 ml and a matching white mini trigger sprayer with a smooth collar, both with a 24/410 neck finish. Once you have filled the bottle, you simply close it with the sprayer and the product is ready to use, with no need to look for another closure. White plastic is not clear, so the contents cannot be seen from the outside. PET is lightweight and does not break, so the set is also suitable where glass would be a risk: in the bathroom or when travelling.

The set is declared as suitable for contact with cosmetics. Only the bottle has a separate certificate for direct food contact; the sprayer does not. The set as a whole is therefore intended for cosmetic and technical products, not for food.


What it is suitable for

The mini trigger sprayer is designed for liquid, thin contents that can be dispersed into a mist. A volume of 300 ml suits body and household products better than a facial serum.

  • Body and hair sprays – hydrosol and water-based body sprays, hair refreshers, liquid leave-in conditioners.
  • Toners and hydrosols in a larger pack – for the home or a salon, where a 100 ml bottle runs out quickly.
  • Alcohol-based sprays – refreshing sprays for hands, textiles or air, and perfume waters based on ethanol.
  • Home sprays – fragranced sprays for textiles and rooms, and solutions for cleaning surfaces without harsh solvents.
  • Auxiliary solutions in production – alcohol for spraying soap to prevent soda ash, and water for misting when making candles or cosmetics.

Thick emulsions, gels and oils are not suitable for this sprayer. The mechanism either fails to draw them up or sprays them out in droplets instead of a mist.


Volume and filling

The nominal volume is the amount the bottle is designed for in normal filling. The brimful volume is larger, because it includes the whole inner space up to the neck. The difference provides room for the sprayer’s dip tube, which reaches into the bottle, and for the contents to expand with changes in temperature. Once the sprayer is screwed on, part of the space near the neck is taken up, and an overfilled bottle would overflow when closed.

Fill to the nominal volume of 300 ml, not to the brim.


Good to know

Before the first filling, rinse the bottle with warm water, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely upside down. For the sprayer, it is enough to spray ethanol through it several times and then clean water, so that the mechanism is rinsed on the inside. For repeated use, proceed in the same way and refill with the same or a similar type of product.

PET and active ingredients. PET tolerates aqueous solutions, hydrosols and ordinary alcohol-based sprays without problems. With a high proportion of essential oils or strong solvents, we recommend testing compatibility on a small amount and checking whether the bottle wall turns cloudy, softens or becomes deformed. The same applies to the seal and dip tube of the sprayer. Do not expose the bottle to aggressive chemicals.

Protect the bottle from heat and direct sunlight. Do not fill PET with hot contents; let them cool to room temperature.

The first few presses after filling run empty until the tube and mechanism fill with the solution. If the sprayer does not spray after standing for a longer time, a few quick presses or rinsing with warm water usually helps when product has dried in the nozzle.

Closures with the same 24/410 neck finish and other ready-made combinations of bottle with pump or cap can be found in the Handymade range. If you make your own combination, check the tightness and behaviour of the closure with your specific formulation.

Recycling. The bottle is made of PET and the sprayer of PP. Before disposal, unscrew them and sort both parts as plastic.


Frequently asked questions

Is the 300 ml plastic bottle with sprayer suitable for food?
No, the set as a whole is not approved for food contact. Only the white PET bottle has a separate certificate for direct food contact; the sprayer has no such assessment. The bottle and sprayer set is declared for cosmetic products and technical preparations. If you need a bottle for food, use it with a closure that has a food-contact certificate.
Can I put oil in the white PET bottle with sprayer?
No, the mini trigger sprayer is not designed for oils. It is intended for thin aqueous and alcohol-based solutions, which it disperses into a mist. Pure oils are more viscous, so the mechanism sprays them unevenly or in droplets, and the nozzle may become clogged. For oils, a bottle with a pump or a cap is more suitable.
Can I put a spray with essential oils in the PET bottle?
Yes, if the essential oils are in a low concentration, typical for hydrosol and alcohol-based sprays. With a higher proportion of essential oils or with strong solvents, we recommend testing compatibility with both the PET and the sprayer seal on a small amount and checking for changes in the wall, cloudiness or deformation. Do not expose the bottle to aggressive chemicals.
Why should I not fill the bottle to the brim?
The correct amount is the nominal volume of 300 ml; the brimful volume serves only as a technical reserve. When the sprayer is screwed on, its tube enters the bottle and part of the space near the neck is taken up. An overfilled bottle would overflow when closed and would leave no room for the contents to expand with changes in temperature.
How do I clean the sprayer for repeated use?
Spray warm water through it several times, then ethanol, and finally clean water again, so that the whole mechanism and the tube are rinsed. Rinse the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry. If product has dried in the nozzle, briefly soaking the nozzle in warm water and repeated pressing will help.

Parameters

Plastic bottle, white, 24/410, without cap, 300 ml

Product colour
White
Country of origin
India
Diameter
58 mm
Nominal capacity
300
Brimful capacity
317 ml
Thread type
24/410
Height
146 mm
Product material
PETPlastic

Fine Mist Sprayer, White, Smooth Collar, 24/410

Product colour
White
Country of origin
China
Diameter
27,4 mm
Thread type
24/410
Height
45 mm
Tube length
180 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, white, 24/410, without cap, 300 ml · O24PB300PDF ↓
Fine Mist Sprayer, White, Smooth Collar, 24/410 · OVR24PBPDF ↓
PDSProduct Data Sheet
Plastic bottle, white, 24/410, without cap, 300 ml · O24PB300PDF ↓
Fine Mist Sprayer, White, Smooth Collar, 24/410 · OVR24PBPDF ↓
DrawingTechnical drawing
Plastic bottle, white, 24/410, without cap, 300 ml · O24PB300PDF ↓
Fine Mist Sprayer, White, Smooth Collar, 24/410 · OVR24PBPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.