PLASTIC BOTTLES
White Plastic Bottle, White Plastic Disc Top With Golden Aluminum Collar, 150 ml
Pack size100 ml150 ml200 ml250 ml300 ml
The white plastic bottle with a gold disc top cap is a ready-made set for body lotions, shower gels, shampoos and conditioners , whether you make them at home or in smaller batches. full description
Lowest price in the last 30 days: €1.29
Total for 1 pcs: €1.29
Quantities add up across all combinations of this bottle.
Product description
The white plastic bottle with a gold disc top cap is a ready-made set for body lotions, shower gels, shampoos and conditioners, whether you make them at home or in smaller batches. The 150 ml volume matches the usual size of bathroom cosmetics for several weeks of use. The cap opens by pressing one side, so the product is dispensed with one hand straight into the palm without unscrewing anything.
The bottle is made of PET, is lightweight and survives a fall onto bathroom tiles without breaking. The white plastic does not show the contents and dampens light, so it also suits formulations with plant extracts or coloured ingredients that should not stand in a clear bottle on a windowsill. The gold cap with a white centre complements the white bottle without any further decoration of the packaging.
What the set is suitable for
- Body lotions – the disc top dispenses thinner emulsions in a suitable amount. Once the lid is pressed down, the opening closes and the contents do not leak into your toiletry bag or onto the shelf.
- Shower gels and liquid soaps – the cap opens with a single press, even with wet hands, which makes it more convenient in the shower than a screw cap.
- Shampoos and conditioners – medium-thick products flow smoothly after the bottle is squeezed, without turning it upside down and without removing a stopper.
- Cleansing milks and micellar gels – thicker formulations that do not run out through the opening on their own are suitable. Watery toners do not belong in this closure.
How to use the set
The disc top works as a small hinged flap. Pressing one side lifts the other and uncovers the dispensing opening. The product is pushed out by squeezing the walls of the bottle, and after dispensing the flap is pressed back and the opening closes. The wall of a PET bottle is easy to squeeze, so the set works well with medium-thick to thicker formulations. Very thin liquids, for example oils or hydrosols, run out of the opening uncontrollably and may leak in a bag if the lid is accidentally left slightly open.
Fill it to the nominal volume, not to the rim of the neck. The nominal volume is the amount the bottle is designed for in normal filling. The physical volume to the neck is larger, and the difference is a reserve for the closure and for the expansion of the contents when the temperature changes. If the bottle is filled to the rim, part of the contents will overflow when the cap is screwed on, and an emulsion may be pushed out through the disc top opening when warmed.
Thick creams and masks, where the bottle wall does not return to its original shape on its own after being squeezed, are unsuitable for a disc top. The wall stays pressed in and the next dose is difficult to squeeze out. For such formulations, choose a jar or a tube instead.
Good to know
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the packaging would dilute the preservative system of the finished product and would condense on the walls during hot filling. PET does not tolerate high temperatures, so emulsions are filled only after they have cooled.
Both the bottle and the closure are declared suitable for contact with cosmetics, and the declarations of conformity are provided with the product. The bottle on its own also has a certificate for direct contact with food, while the disc top cap does not. The set as a whole is therefore intended exclusively for cosmetics, so do not use it for homemade syrups or cooking oils.
Do not expose PET to aggressive chemicals. For formulations with a higher proportion of essential oils, alcohol or an oil phase, we recommend leaving the filled bottle to stand for several weeks and checking whether the wall softens or deforms and whether the contents change scent. Before a larger batch, it is likewise worth checking the tightness of the cap with your specific formulation, especially if the product will be transported.
After thorough washing and disinfection, the bottle can be refilled. Product residues remain under the movable flap of the disc top, so rinse it thoroughly when refilling and leave it to dry in the open position.
Closures with the same neck type and ready-made combinations of this bottle with other caps can be found in the Handymade range. If you make your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.
Do not fill the bottle with a hot emulsion and do not expose it to heat, for example on a sunny windowsill or near a radiator. PET may deform and the closure will stop sealing.
Frequently asked questions
Parameters
White plastic bottle, 150 ml 24/410, without cap
Disc top cap, aluminium + PP, gold, white center, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
- PPWRPackaging Declaration (PPWR)
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.






























































