PLASTIC BOTTLES
White Plastic Bottle, White Plastic Disc Top With Golden Aluminum Collar, 250 ml
Pack size100 ml150 ml200 ml250 ml300 ml
The white plastic bottle with a volume of 250 ml and a gold disc top cap forms a ready-to-use set for dispensing liquid and medium-thick cosmetic products. full description
Lowest price in the last 30 days: €1.29
Total for 1 pcs: €1.29
Quantities add up across all combinations of this bottle.
Product description
The white plastic bottle with a volume of 250 ml and a gold disc top cap forms a ready-to-use set for dispensing liquid and medium-thick cosmetic products. The bottle is made of PET, is lightweight and withstands repeated squeezing during dispensing. The opaque white plastic limits the light reaching the contents, which you will appreciate with formulations containing vegetable oils, extracts or fragrance ingredients.
The cap has a gold aluminium shell and a white polypropylene centre that holds a hinged disc with a dispensing opening. The set is suitable above all for shampoos, shower gels, body lotions and conditioners, that is, products dispensed by squeezing the bottle directly into the palm.
How to dispense
The disc top cap is opened by pressing one side of the disc. The other side lifts and uncovers a small opening, through which the contents are pushed out by gently squeezing the bottle. It closes the same way: the disc is pressed back down and the opening is sealed. You can dispense with one hand in the shower or at the sink. The neck of the bottle stays clean, because the contents pass only through the opening in the disc.
The amount that flows out with one squeeze depends on the viscosity of the contents. Thin liquids flow out even without significant pressure. Thick creams are difficult to dispense through the opening and clog the disc.
Before filling an entire batch, pour the product into one bottle and test the dispensing. If the contents flow out of the disc top with difficulty, slightly reducing the viscosity of the formulation will help. If they flow out on their own as soon as you turn the bottle over, they are too thin for this type of closure and a pump or sprayer will be more suitable.
Suitable for products such as
- Shampoos and shower gels – liquid to slightly thickened cleansing products that are dispensed by squeezing the bottle.
- Body lotions and light emulsions – leave-on body care that is dispensed into the palm.
- Conditioners and hair masks of thinner consistency – as long as the contents flow, the disc top dispenses them without clogging.
- Liquid hand soaps – the white bottle hides any colour changes in the contents and is built for frequent squeezing.
- Massage and body oils – for oil-based contents, we recommend checking that the set is leak-proof when carried and when turned upside down.
Nominal volume and filling
The nominal volume of 250 ml is the volume the bottle is designed for during normal filling. The total volume up to the rim of the neck is larger. The difference forms a reserve for the cap and for the expansion of the contents when the temperature changes. If you fill the bottle right up to the neck, the contents are pushed out through the disc when closing and the cap may not seal properly.
Good to know
The set is declared as suitable for contact with cosmetics. The certificate for direct food contact applies to the bottle alone; the disc top cap does not have one. The set as a whole is therefore intended for cosmetic products.
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and let them dry completely. After it is emptied, the set can be refilled. Simply wash it thoroughly, open the disc and also clean the dispensing opening, where product residues tend to dry.
Let hot emulsions cool before filling, so that the wall of the PET bottle does not become deformed.
The plastic is not intended for aggressive chemicals and solvents. For formulations with a high proportion of alcohol or other solvents, test the behaviour of both the bottle and the cap on a single piece before you fill a larger quantity.
You can find closures with the same neck type, as well as other ready-made combinations of bottle and closure, in the Handymade range. For your own combination, we recommend testing that it is leak-proof and how it dispenses with your specific formulation.
The bottle is made of PET, which is one of the commonly recycled plastics. The cap combines aluminium with polypropylene, so separate it from the bottle before disposal.
Frequently asked questions
Parameters
Plastic bottle, white, 24/410, without cap, 250 ml
- Product colour
- White
- Country of origin
- European Union
- Nominal capacity
- 250
- Diameter
- 50 mm
- Thread type
- GL24
- Height
- 164 mm
Disc top cap, aluminium + PP, gold, white center, 24/410
- Country of origin
- European Union
- Diameter
- 28 mm
- Thread type
- 24/410
- Height
- 29 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





























































