+421 950 333 113info@handymade.store−10 %Shop now

ALUMINUM BOTTLES

Aluminium Bottle, Black Pump, 200 ml

Pack size50 ml100 ml200 ml225 ml

The aluminium bottle with a black pump is a ready-made combination of bottle and closure for 200 ml of liquid and semi-liquid products that are dispensed by pressing. full description

AvailabilityIn stock · 146 pcs
Product codeO24HS200-OVD24PC
€2.98incl. VAT

Lowest price in the last 30 days: €2.98

Volume pricing
1–199 pcs€2.98Your price
200–999 pcs€2.73−8 %
1000–4999 pcs€2.53−15 %
from 5000 pcs€2.24−25 %

Total for 1 pcs: €2.98

Quantities add up across all combinations of this bottle.

Product description

The aluminium bottle with a black pump is a ready-made combination of bottle and closure for 200 ml of liquid and semi-liquid products that are dispensed by pressing. Aluminium does not let light through, so the contents are protected from its effects, and the bottle is also lightweight and will not break. It is suitable for liquid soaps, shower gels, shampoos, body lotions and massage oils, that is, wherever you want to dispense the contents in small doses without unscrewing a cap. The set is declared suitable for contact with cosmetics.


What it is suitable for

  • Rinse-off bathroom products – liquid hand soap, shower gel, shampoo or conditioner with a more liquid consistency, dispensed with a wet hand. If the bottle falls onto the tiles, it will not break.
  • Body lotions and light emulsions – the pump dispenses them evenly and the contents are not contaminated by fingers during use.
  • Massage and body oils – one press dispenses approximately 1 ml, so dispensing is precise and nothing is spilled.
  • Light-sensitive products – oils and emulsions with plant extracts or active ingredients that lose their properties more quickly in light.

How to use the set

The pump is screwed onto a 24/410 neck finish, the dip tube reaches the bottom of the bottle and the contents are drawn from the base. One press dispenses approximately 1 ml, which for liquid soap or lotion corresponds to a usual single dose into the palm. The pump will not draw up thicker creams and balms. The contents should be liquid to slightly viscous so that they pass through the tube and the head.

Nominal volume is the volume the bottle is designed to hold when filled normally. The total brimful volume given in the parameters is the physical volume up to the neck. The difference between them is the reserve for the tube and the body of the pump. The bottle should therefore be filled to the nominal volume, not to the brim, otherwise part of the contents will overflow when the pump is screwed on.

After screwing on the pump, press it several times to prime it until the tube fills and the contents start to come out. This is normal during first use and is not a fault of the pump.


Good to know

Before the first filling, we recommend washing the bottle and the pump, disinfecting them with isopropyl alcohol or ethanol and leaving them to dry completely. Rinse the pump tube separately, as residual water in it would dilute the first doses.

Aluminium is a softer metal. If the bottle is dropped or pressed hard, it may dent, and the dent cannot be straightened out. Do not expose the bottle to high temperatures and tighten the pump by hand, without excessive force.

Water-based products with a low or high pH and solutions with electrolytes may react with aluminium. We recommend checking compatibility with your specific formulation by testing in the filled packaging over several weeks, and only then filling the whole batch.

Only the plastic pump has a certificate for direct contact with food. The aluminium bottle has no such declaration; the set as a whole is intended for cosmetics.

When reusing the bottle, wash and disinfect it thoroughly. Unscrew the pump and rinse it with clean water so that no residues of the previous contents remain in it. At the end of its life, the aluminium bottle belongs in metal recycling, while the pump made of polypropylene is unscrewed and sorted with plastics.

Closures with the same neck type and other ready-made combinations of bottle and closure can be found in the Handymade range. If you are making your own combination, we recommend checking the tightness, dispensing and behaviour of the packaging with your specific formulation.


Frequently asked questions

Does the aluminium bottle with a pump protect the contents from light?
Yes, aluminium is opaque and does not let light through. The contents are thus protected from its effects throughout use. The bottle is therefore suitable for oils, body serums and emulsions with active ingredients that oxidise more quickly in light or lose their colour and scent.
Can a thick cream be filled into an aluminium bottle with a pump?
No, the pump is intended for liquid to slightly viscous products. A thick cream or balm will not be drawn up through the tube and the pump will jam. Liquid soaps, shower gels, shampoos, body lotions and oils are suitable. For thicker emulsions, we recommend testing the dispensing on a small quantity before filling the whole batch.
How much does a 200 ml aluminium bottle with a pump hold?
The bottle is filled to the nominal volume of 200 ml, not to the brim. The reserve above this level is needed for the tube and the body of the pump. The total brimful volume is given in the parameters, but when filling normally do not come close to it, otherwise the contents will overflow when the pump is screwed on.
Is the aluminium bottle with a pump suitable for water-based and alcohol-based products?
The set is declared suitable for cosmetics, but the behaviour of a specific water-based or alcohol-based formulation in aluminium must be checked. Water-based products with a low or high pH and solutions with electrolytes may react with the metal. Before filling the whole batch, we recommend a test lasting several weeks in the filled packaging, monitoring the colour, scent and condition of the bottle.
Is the aluminium bottle with a pump suitable for food?
The set as a whole is not approved for contact with food. Only the plastic pump has a certificate for direct contact with food; the aluminium bottle has no such declaration. The combination is therefore intended for cosmetic products and should not be used for home-made oils or syrups.
How do I clean an aluminium bottle with a pump before reusing it?
Wash the bottle with warm water and washing-up liquid, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely. Unscrew the pump, pump clean water through it until it runs without residues of the contents, and leave it to dry. For oil-based contents, it helps to rinse the tube first with a small amount of alcohol.

Parameters

Aluminium bottle, 24/410, 200 ml

Product colour
Silver
Country of origin
China
Nominal capacity
200
Brimful capacity
221 ml
Diameter
50 mm
Thread type
24/410
Height
140 mm
Product material
Aluminium

Plastic pump dispenser, black, 24/410

Product colour
Black
Country of origin
China
Diameter
27,2 mm
Thread type
24/410
Height
37 mm
Tube length
180 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 200 ml · O24HS200PDF ↓
Plastic pump dispenser, black, 24/410 · OVD24PCPDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 200 ml · O24HS200PDF ↓
Plastic pump dispenser, black, 24/410 · OVD24PCPDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 200 ml · O24HS200PDF ↓
Plastic pump dispenser, black, 24/410 · OVD24PCPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.