ALUMINUM BOTTLES
Aluminium bottle, clear pump, 100 ml
The aluminium bottle with a clear pump, 100 ml , is packaging for cosmetic products that are dispensed by pressing: body lotions, liquid soaps, shampoos, conditioners, shower gels or lighter face lotions. full description
Lowest price in the last 30 days: €2.39
Total for 1 pcs: €3.08
Quantities add up across all combinations of this bottle.
Product description
The aluminium bottle with a clear pump, 100 ml, is packaging for cosmetic products that are dispensed by pressing: body lotions, liquid soaps, shampoos, conditioners, shower gels or lighter face lotions. Aluminium is lightweight, does not break when dropped and does not let light through, so it protects the contents without you having to choose dark glass. The clear pump with a 24/410 thread screws directly onto the bottle and dispenses a metered dose. This way, the product comes into contact with hands and air during use to a lesser extent than in an open jar. The set is declared suitable for contact with cosmetic products.
What it is suitable for
- Body and face lotions – liquid to medium-thick emulsions that the pump draws up and dispenses without difficulty.
- Liquid soaps and shower gels – the bottle withstands a humid bathroom and does not break when dropped on tiles.
- Shampoos and conditioners – one-handed dispensing is convenient when washing hair.
- Body and massage oils – the pump draws liquid oils and oil blends smoothly, and the aluminium protects them from light.
- Hand gels – a 100 ml travel format for a bag or a desk.
How the set works
When you press the head, the product is drawn up through the tube from the bottom of the bottle and pushed out through the outlet. One press dispenses approximately 1.4 ml, which for an ordinary body lotion corresponds to a dose for the hands or forearm. Through the clear body of the pump you can see whether the product has been drawn up and whether any air remains in the tube. With an opaque bottle you cannot tell this otherwise.
When filling, take into account the difference between the nominal and the total volume. The nominal volume is the amount the packaging is designed for under normal filling. The total brimful volume given in the parameters is the physical volume up to the neck. The difference provides room for the tube and the body of the pump and for the expansion of the contents when the temperature changes. Fill the bottle up to the nominal volume, never to the brim, otherwise the product will overflow when the pump is screwed on.
The pump tube is supplied longer than the bottle requires. Before first use, shorten it with a sharp knife so that, once screwed on, it reaches just above the bottom and does not bend inside the bottle. A bent tube draws product less effectively and leaves an unused residue at the bottom.
Preparation and filling
Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual water would dilute the finished product and put unnecessary strain on the preservative system. You cannot see the level through aluminium when filling, so it is best to fill on a scale or with a measuring cylinder. After screwing on the pump, press the head several times until the tube fills and the product starts to be dispensed.
For repeated use, unscrew the pump, pump warm water through it until it runs clear, and let it dry disassembled. Rinse the bottle and dry it upside down. Residues of the old formulation in the tube are a common reason why the new contents spoil sooner.
Good to know
The pump handles liquid and medium-thick products. Thick creams, body butters or scrubs with particles get stuck in it, and the particles may damage the valve. For such products, choose a jar or a container. The set does not work as a sprayer: the product comes out as a compact dose, not as a mist.
For water-based formulations with a lower or higher pH, and for products with a high proportion of essential oils or solvents, we recommend testing on a single piece before larger production to see how the bottle, tube and valve behave with your specific formulation over several weeks. Check the appearance of the contents, the tightness and the smoothness of dispensing.
Aluminium does not break when dropped on a hard floor, but it may dent. This usually does not affect function, but from an aesthetic point of view it is worth avoiding sharp impacts. The bottle has a 24/410 neck finish. You will find closures with the same neck type and other ready-made combinations in the Handymade range; if you make your own combination, we recommend checking the tightness with your specific formulation.
After use, the components belong in separate recycling: the bottle with metals, the polypropylene pump with plastics.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 100 ml
Transparent Plastic Pump, 24/410, FBOG 200 mm
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.















































