+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

White Plastic Bottle, Transparent Plastic Pump, 100 ml

A white plastic bottle with a capacity of 100 ml and a clear pump with a 24/410 neck finish is ready-made packaging for cosmetics dispensed by pressing: body and face lotions, liquid soaps, lighter creams, shampoos or… full description

AvailabilityPre-order
Product codeO24PB100-OVD24PP
€1.07incl. VAT

Lowest price in the last 30 days: €0.69

Pre-orderThis variant is currently out of stock — your order will be a pre-order and delivery may take longer.
Volume pricing
1–119 pcs€1.07Your price
120–1079 pcs€1.04−3 % · 1× plato
1080–5039 pcs€1.01−5 % · 9× plato
from 5040 pcs€0.98−9 % · 42× plato

Total for 1 pcs: €1.07

Quantities add up across all combinations of this bottle.

Product description

A white plastic bottle with a capacity of 100 ml and a clear pump with a 24/410 neck finish is ready-made packaging for cosmetics dispensed by pressing: body and face lotions, liquid soaps, lighter creams, shampoos or cleansing gels in travel or sample sizes. The PET bottle is lightweight and shatter-resistant, and the white opaque material limits the amount of light reaching the contents. The pump releases approximately the same amount with each press, so the product is dispensed without opening the bottle and without unnecessary contact with your hands.

The set is declared suitable for contact with cosmetics. Only the bottle has a certificate for direct food contact; the pump does not, so the set as a whole is intended for cosmetics.


What the set is suitable for

  • Body and face lotions – thinner emulsions pass smoothly through the dip tube and the pump valve, and one dose is enough for one use.
  • Liquid soaps and cleansing gels – a pump by the sink or in the shower can be operated even with wet hands.
  • Lighter creams and hair products – conditioners, styling lotions or hand creams with a softer consistency that the pump valve can still push through.
  • Samples and travel size – the 100 ml volume suits testing a formulation with customers or a smaller batch of your own cosmetics.

Very thick creams, balms and products with scrub particles do not belong in this packaging. The pump either will not draw them up or it will clog. For a borderline consistency, fill one bottle and test whether the pump draws evenly.


Filling and volume

The nominal volume of 100 ml is the volume the bottle is designed for under normal filling. The total brimful volume is the physical volume up to the neck and you can find it in the parameters. The difference between the two values is a reserve for the dip tube and the pump valve and for expansion of the contents when the temperature changes. Fill the bottle up to the nominal volume, not to the brim. If the bottle is overfilled, the pump pushes part of the contents out through the neck when it is screwed on.

Let emulsions and gels cool before filling. PET is not designed for hot filling, and warm contents may deform the bottle wall.


Working with the pump

The pump dip tube is supplied longer than the height of the bottle so that it can also be used in taller packaging with the same neck. Before first use, trim it so that its end reaches just above the bottom of the bottle and does not bend against it. After screwing the pump on, prime it with several empty presses until the tube and chamber fill and the product starts to come out.

One press releases approximately 1.4 ml. Thicker products dispense somewhat less and more slowly. The clear pump body shows whether the chamber is filled and whether air is trapped in it.

Cut the tube straight with a sharp knife or scissors, not at an angle with a torn edge. A straight cut above the bottom of the bottle draws evenly and does not leave as much unused residue.


Good to know

  • Preparation before first filling – wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Also flush the inside of the pump with alcohol by pressing it several times.
  • Essential oils and solvents – both PET and PP tolerate common cosmetic emulsions and oils, but aggressive chemicals damage the packaging. For formulations with a higher proportion of essential oils, alcohol or solvents, test how the packaging behaves with your specific formulation.
  • Reuse – after thorough washing and drying, the bottle and the pump can be filled again. When cleaning, pump warm water through the pump so that residues of the previous product are released from the valve.
  • Other closures – closures with the same neck type fit the bottle, and you can find ready-made combinations in the Handymade range. For your own combination, check the seal and the dispensing with your specific formulation.
  • Recycling – the bottle is made of PET and the pump of PP, so separate them on disposal and put them in the plastics bin.

Frequently asked questions

Is the white 100 ml bottle and pump set suitable for food?
No, the set as a whole is not approved for food contact. Only the white PET bottle has a certificate for direct food contact; the pump does not. The bottle and pump assembly is intended for cosmetic products, for which the suitability of both components is declared.
How much product fits into the white 100 ml bottle with a pump?
The bottle is filled up to the nominal volume of 100 ml. The remaining space up to the brim stays free for the dip tube and the pump valve and for expansion of the contents when the temperature changes. If the bottle is filled to the brim, part of the product is pushed out through the neck when the pump is screwed on, and the packaging may leak when warmed.
How thick a product can the 24/410 pump handle?
The pump works with liquid to medium-thick products, such as lotions, liquid soaps, shampoos and softer creams. Thick creams, balms and products with particles will not be drawn up by the valve, or they will clog it. Thicker contents come out in smaller doses, so for a borderline consistency, test one filled bottle.
Does the pump dip tube need to be shortened?
Yes, the dip tube is trimmed to the height of the bottle before first use. It is supplied longer so that it can also be used in taller packaging with the same neck. Its end should reach just above the bottom of the bottle and should not bend against it. After screwing the pump on, prime it with several empty presses.
Can the white bottle with pump be reused?
Yes, the bottle and the pump can be filled again after washing and drying. Pump warm water through the pump several times to release residues from the valve and the tube, and then disinfect it with alcohol. When changing the type of product, check that no previous contents remain in the tube.

Parameters

White plastic bottle, 24/410, without cap, 100 ml

Product colour
White
Country of origin
India
Diameter
44 mm
Nominal capacity
100
Brimful capacity
117 ml
Thread type
24/410
Height
98 mm
Product material
PETPlastic

Transparent Plastic Pump, 24/410, FBOG 200 mm

Product colour
Clear
Country of origin
China
Diameter
53 mm
Thread type
24/410
Height
45 mm
Product material
PPPlastic
Tube length
200 mm
Dose
1,4 ml

Product documentation

PPWRPackaging Declaration (PPWR)
White plastic bottle, 24/410, without cap, 100 ml · O24PB100PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
PDSProduct Data Sheet
White plastic bottle, 24/410, without cap, 100 ml · O24PB100PDF ↓
Transparent Plastic Pump, 24/410, FBOG 200 mm · OVD24PPPDF ↓
DrawingTechnical drawing
White plastic bottle, 24/410, without cap, 100 ml · O24PB100PDF ↓
Download all (ZIP)

5 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.