+421 950 333 113info@handymade.store−10 %Shop now

ALUMINUM BOTTLES

Aluminium Bottle, White Lotion Pump With Glossy Silver Collar, 100 ml

Pack size50 ml100 ml200 ml225 ml

Aluminium bottle with pump for liquid and cream products The set combines an aluminium bottle with a capacity of 100 ml and a plastic pump with a white and silver head, which dispenses approximately 1 ml of the contents… full description

AvailabilityIn stock · 173 pcs
Product codeO24HS100-OVD24BS
€3.08incl. VAT

Lowest price in the last 30 days: €3.08

Volume pricing
1–199 pcs€3.08Your price
200–999 pcs€2.82−8 %
1000–4999 pcs€2.62−15 %
from 5000 pcs€2.31−25 %

Total for 1 pcs: €3.08

Quantities add up across all combinations of this bottle.

Product description

Aluminium bottle with pump for liquid and cream products

The set combines an aluminium bottle with a capacity of 100 ml and a plastic pump with a white and silver head, which dispenses approximately 1 ml of the contents per press. It is suitable for products that are applied repeatedly and in small doses: liquid hand soap, body lotion, light hand cream, thinner shampoo or conditioner, facial cleansing milk or massage oil. Aluminium does not let light through, so it protects light-sensitive ingredients in a similar way to dark glass, and it does not break when dropped.

Both the bottle and the pump have a 24/410 neck finish, so the pump fits tightly on the bottle without any adapters.


What the set is suitable for

  • Liquid soaps and cleansing gels – a 1 ml dose corresponds to one hand wash, the contents do not spill and consumption is even.
  • Body and facial lotions – lower-viscosity emulsions pass through the pump without problems and your fingers do not come into contact with the contents.
  • Body oils and oil serums – the opaque packaging slows down the oxidation of light-sensitive oils.
  • Samples and travel packs – smaller volume, low weight and resistance to breakage.

Filling and dispensing

The nominal volume is the volume the packaging is designed for under normal filling. The brimful capacity is the physical volume of the bottle up to the neck. The difference between them is a reserve for the pump’s dip tube and for the expansion of the contents when the temperature changes. You should therefore fill the bottle to the nominal volume, not to the brim, otherwise the contents will overflow through the thread when you screw on the pump.

After filling the bottle and screwing on the pump, press the head several times to prime the pump until the tube fills and the contents come out in a full dose. The first one or two presses after each filling are usually weaker.

The pump works best with liquid to medium-thick products. Thick creams and butters are drawn up with difficulty or not at all, and a jar or a bottle with a different type of closure is more suitable for them. We recommend testing the consistency on a small amount before filling a whole batch.


Good to know

Contact with cosmetics. The aluminium bottle has a declaration of suitability for use with cosmetic products. No such declaration is available for the plastic pump, so the set as a whole is not declared as suitable for contact with cosmetics. For your own formulation, we therefore recommend checking how the pump performs with your specific contents: leak-tightness, smoothness of dispensing and the condition of the material after several weeks. The set is not intended for use with food.

Aluminium and the composition of the contents. Information on any internal coating of the bottle is not available. For formulations with a strongly acidic or alkaline pH, a higher proportion of electrolytes or a higher concentration of essential oils, it is advisable to run a stability test in this packaging before using it for larger quantities.

Before the first filling, wash both the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the tube and in the pump head is a common cause of microbial contamination of water-based products.

Dip tube length. If the dip tube extends beyond the bottom of the bottle and the pump cannot be tightened, shorten it with an angled cut so that its end just touches the bottom. An angled cut stops the tube from sticking to the bottom and ceasing to draw up the contents.

Reuse. The bottle withstands repeated washing and disinfection. After emptying, clean the pump by pumping warm water through it and then air until it is empty. The aluminium bottle belongs in metal recycling; the pump combines plastic and metal and is recycled separately from the bottle.

Closures with the same neck type and other ready-made packaging and closure combinations can be found in the Handymade range.


Frequently asked questions

Does the aluminium bottle protect the contents from light?
Yes, aluminium is completely opaque and lets no light reach the contents. For oils prone to oxidation, vitamins or plant extracts sensitive to UV radiation, it offers the same protection as dark glass. Unlike glass, it cannot shatter, but the packaging is more prone to denting if it is dropped on its edge.
How much does the pump dispense per press?
The pump dispenses approximately 1 ml per full press of the head. With liquid soap, the dose corresponds to one hand wash. The actual amount depends on the viscosity of the contents, so with thicker products it is worth testing the dose on a small amount.
Can thick cream be pumped through this pump?
No, the pump is designed for liquid to medium-thick products. Thick creams, butters and emulsions with high viscosity are drawn up through the tube poorly, the dose is irregular or the contents do not come out at all. A jar, or a bottle with a different type of closure, is more suitable for such products.
Is the aluminium bottle with pump suitable for cosmetics?
The aluminium bottle has a declaration of suitability for use with cosmetic products. No such declaration is available for the plastic pump, so the set as a whole is not declared suitable for contact with cosmetics. For your specific formulation, we recommend checking the tightness and the behaviour of the pump with the contents by testing on a small amount.
Can I fill the aluminium bottle to the brim?
No, the bottle is filled to the nominal volume of 100 ml. The brimful capacity is larger, but this reserve is taken up by the pump’s dip tube and by the space for the expansion of the contents when the temperature changes. If you fill the bottle to the brim, the contents will overflow through the thread when you screw on the pump and the outside of the bottle will be left dirty.
How do I clean the aluminium bottle with pump before reusing it?
Wash the bottle in warm water with detergent, rinse it, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely, upside down. Clean the pump by pumping warm water through it and then air until no more liquid comes out. The head and tube must be completely dry so that the next water-based product is not contaminated by residues of the previous contents.

Parameters

Aluminium bottle, 24/410, 100 ml

Product colour
Silver
Country of origin
China
Nominal capacity
100
Brimful capacity
106 ml
Diameter
40 mm
Thread type
24/410
Height
110 mm
Product material
Aluminium

Plastic dispenser, 24/410, white-silver, 180 mm

Product colour
SilverWhite
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
205 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic dispenser, 24/410, white-silver, 180 mm · OVD24BSPDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic dispenser, 24/410, white-silver, 180 mm · OVD24BSPDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic dispenser, 24/410, white-silver, 180 mm · OVD24BSPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.