ALUMINUM BOTTLES
Aluminium Bottle, White Spray With Glossy Gold Collar, 200 ml
Pack size50 ml100 ml200 ml225 ml
The aluminium bottle with a white fine mist sprayer and a glossy gold collar is a ready-made set for 200 ml of a liquid product that is applied by spraying. full description
Lowest price in the last 30 days: €3.17
Total for 1 pcs: €3.17
Quantities add up across all combinations of this bottle.
Product description
The aluminium bottle with a white fine mist sprayer and a glossy gold collar is a ready-made set for 200 ml of a liquid product that is applied by spraying. The metal body of the bottle does not let light through, so the contents are completely protected from it. Compared with glass, the bottle is light and does not break if dropped. The fine mist sprayer with a 24/410 neck finish is screwed directly onto the bottle, so the set only needs to be filled.
Silver aluminium, a white fine mist sprayer and a gold collar give the packaging a uniform look that suits facial mists, toners, hair sprays or fragrance waters intended for sale as well as for your own use. The set is declared suitable for contact with cosmetics. It is not intended for food.
What the set is suitable for
The mechanical fine mist sprayer works best with thin, watery liquids that it can disperse into a mist.
- Toners and hydrosols – a thin water phase passes through the nozzle without problems and the fine mist is easy to apply to the face.
- Hair sprays and leave-in conditioners – water-based or slightly thickened solutions; for higher viscosity we recommend a test spray.
- Body and refreshing sprays – including sprays containing alcohol; it is advisable to check how the sprayer behaves with your specific formulation.
- Fragrance waters and room sprays – the opaque packaging hides contents that could change colour in light.
- Cleaning and disinfectant sprays for hands or surfaces – if the product contains alcohol or surfactants, check the tightness and the function of the pump after a few days.
Thick emulsions, gels and pure oils do not belong in a mechanical sprayer. The pump either does not draw them up or pushes them out as a stream instead of a mist.
Filling and dispensing
The nominal volume is the amount the packaging is designed for under normal filling. The brimful volume is the physical volume of the bottle up to the neck, and you will find it in the parameters. The difference between the two is a reserve for the tube and the body of the sprayer, which are immersed in the contents after screwing on, and for the expansion of the liquid when the temperature changes. For this reason the bottle is filled up to the nominal volume, not to the brim.
After filling, screw the sprayer on firmly and press it several times without product until the tube and the pump fill up. Only then is the dose with each press consistent.
The tube reaches the bottom of the bottle, so almost all of the contents can be sprayed out. One press releases a measured dose, the volume of which is stated in the parameters of the sprayer. From it you can estimate how many applications a full bottle will last.
Good to know
Before the first filling, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Any remaining moisture would dilute the product. Rinse the sprayer by pumping clean water through it and then air.
Before filling a larger batch, we recommend checking how the packaging behaves with your specific formulation. Fill a smaller amount, leave it in the packaging for several days and watch the tightness of the thread, the function of the pump and any changes in the scent or colour of the contents.
Aluminium does not break on impact, but it can dent. When transporting and storing filled bottles, therefore, give them support so that they do not press against each other.
The set can be used repeatedly. When changing the contents to a different product, wash and disinfect the bottle and the sprayer thoroughly, otherwise fragrance residues in the tube will carry over into the new product. You can swap the 24/410 fine mist sprayer for another closure with the same neck finish from the Handymade range, where you will also find other ready-made bottle and closure combinations. With your own combination, check the tightness and dispensing.
At the end of its life, the bottle is recycled as aluminium. The sprayer combines plastic with metal parts, so separate it from the bottle before disposal.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 200 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































