+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

GLASS BOTTLES up to 10 ml

Amber Glass Bottle, Type B, Slim, Black Fine Mist Sprayer, Smoky Overcap, 10 ml

Pack size10 ml50 ml100 ml

The amber glass medicine bottle with black fine mist sprayer and smoky overcap is a ready-made set for small quantities of liquid cosmetics applied by spraying. full description

AvailabilityIn stock · 211 pcs
Product codeO18SH010B-OVR18PC2
€0.62incl. VAT

Lowest price in the last 30 days: €0.62

Volume pricing
1–99 pcs€0.62Your price
100–999 pcs€0.57−8 %
1000–4999 pcs€0.52−15 %
from 5000 pcs€0.47−24 %

Total for 1 pcs: €0.62

Quantities add up across all combinations of this bottle.

Add 99 more pcs and the price drops to €0.57/pc.

Product description

The amber glass medicine bottle with black fine mist sprayer and smoky overcap is a ready-made set for small quantities of liquid cosmetics applied by spraying. The nominal volume of 10 ml is enough for a travel-size toner, a fragrance sample or a refreshing facial mist that you want to carry in your bag. Amber glass filters light, so hydrosols, perfumed waters and toners with plant extracts keep their colour and scent unchanged for longer.

The sprayer is screwed directly onto the neck of the medicine bottle, so you only need to fill the set, tighten it and use it. The tall, slender shape of the type B medicine bottle takes up little space and sits well in the hand when spraying. The smoky overcap covers the nozzle, protects it from dust and prevents accidental pressing during transport.


Suitable uses

  • Hydrosols and facial toners – thin water-based solutions are dispersed into fine droplets through the nozzle, and the amber glass limits the effect of light on sensitive ingredients.
  • Perfumed and alcohol-based waters – samples of your own fragrances, body or hair mists on an alcohol base, and fabric fresheners in a small pack.
  • Travel and test packs – the small volume lets you divide a larger batch into samples for customers or take a toner with you on the road without a large bottle.
  • Mists with active ingredients – unthickened water-based serums and solutions with glycerine, panthenol or niacinamide, applied as a spray rather than in drops.

Sprayer and dispensing

The sprayer is made of polypropylene (PP) and one press releases approximately 0.12 ml of product, so a full medicine bottle gives you roughly 80 doses. The mechanism is built for thin liquids. Water-based solutions, hydrosols and alcohol bases pass through the nozzle without difficulty. Oils, thickened serums or emulsions with higher viscosity will not spray and may clog the mechanism. For oil-based products, a medicine bottle with a dropper or a pump is more suitable.

For formulations with a higher proportion of essential oils or solvents, we recommend checking how the plastic parts of the sprayer behave with your specific contents. Simply fill one set and, after a few weeks, check the tightness, the movement of the piston and the appearance of the plastic.

The dip tube of the sprayer is longer than the medicine bottle. Before the first assembly, shorten it with a sharp knife using a diagonal cut so that it reaches the bottom without bending. The sprayer will then draw up even the last few millilitres of the contents.


Nominal and total volume

The nominal volume is the amount the medicine bottle is designed to hold when filled normally, in this case 10 ml. The total brimful volume is the physical volume of the glass up to the neck and is given in the parameters. The difference between them is a reserve for the dip tube and the body of the sprayer, which push the level upwards after screwing on, and for the expansion of the liquid when the temperature changes. The medicine bottle is therefore filled up to the nominal volume, not to the brim. If it is overfilled, the contents leak out when the sprayer is tightened and flood the thread.


Good to know

  • Preparation before first filling – wash the medicine bottle with warm water, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely with the neck facing down. Spray clean alcohol through the sprayer and leave it to dry, so that water does not get into the mechanism before filling.
  • Contact with cosmetics – the set as a whole is declared suitable for use with cosmetic products.
  • Glass and temperature – let the contents cool before pouring them in. Glass does not tolerate sudden temperature changes well, and a hot liquid in a cold medicine bottle may cause it to crack.
  • Repeated use – after washing and disinfection, you can fill the medicine bottle repeatedly. Before the next filling, spray clean water through the sprayer several times and then alcohol, so that no residues of the previous contents remain in the dip tube.
  • Other closures – closures with the same type of neck and other ready-made combinations can be found in the Handymade range. If you make your own combination, check the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
  • Recycling – once the contents have been used up, the glass medicine bottle belongs in glass waste and the plastic sprayer in plastics; separate them before disposal.

The set is not approved for contact with food. The glass medicine bottle on its own has a certificate for direct contact with food, but the sprayer does not. For homemade oils, syrups or herbal infusions, use a separate medicine bottle with a closure that has a food certificate.


Frequently asked questions

Does the amber glass of the medicine bottle protect the contents from light?
Yes, amber glass reduces the passage of light and limits its effect on sensitive ingredients. Hydrosols, plant extracts or perfumed waters therefore change colour and scent more slowly than in a clear bottle. The protection is not complete, so you should still not store the medicine bottle in direct sunlight, and use a suitable preservative with water-based contents.
Can the medicine bottle with sprayer be used for an oil serum?
No, the sprayer is intended for thin water-based or alcohol-based liquids. Oils and thickened serums do not pass through the nozzle as a mist; they drip out and the mechanism may become clogged. For oil serums and facial oils, a medicine bottle of the same shape with a dropper or a pump is more suitable, and you can find it in the Handymade range.
How much liquid fits into a 10 ml medicine bottle?
The medicine bottle is filled up to the nominal volume of 10 ml, and the total brimful volume is slightly larger and is given in the parameters. The reserve above the nominal volume is needed for the dip tube and the body of the sprayer, which push the level upwards after screwing on. If you fill it to the brim, the contents leak out during tightening and flood the thread.
How do I prepare the medicine bottle and sprayer before first filling?
Wash the medicine bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry with the neck facing down. Spray clean alcohol through the sprayer several times to clean the dip tube and the nozzle, and leave it to dry. Disinfection matters especially for water-based contents, where residual water or impurities speed up the growth of microorganisms.
Is the medicine bottle and sprayer set suitable for food?
No, the set as a whole is not approved for contact with food. The glass medicine bottle on its own has a certificate for direct contact with food, but the plastic sprayer does not. The set is declared suitable for use with cosmetic products, that is, toners, hydrosols, perfumed waters and mists.
How do I clean the sprayer for repeated use?
Empty the sprayer, place the dip tube in clean water and spray several times, then proceed in the same way with alcohol. Alcohol dissolves residues of fragrance ingredients and speeds up drying. If the medicine bottle contained a coloured or strongly scented mixture, keep in mind that a trace of the scent may remain in the plastic and transfer to the next filling.

Parameters

Glass bottle, vial type B, tall, 18 mm, 10 ml

Product colour
Brown
Country of origin
European Union
Nominal capacity
10
Brimful capacity
12 ml
Diameter
24,2 mm
Thread type
18/410
Height
63,7 mm
Product material
Glass

Plastic Fine Mist Sprayer, Smoke Cap, 18/415

Product colour
Black
Country of origin
China
Diameter
22,3 mm
Thread type
18/415
Height
40 mm
Tube length
115 mm
Dose
0,12 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Glass bottle, vial type B, tall, 18 mm, 10 ml · O18SH010BPDF ↓
Plastic Fine Mist Sprayer, Smoke Cap, 18/415 · OVR18PC2PDF ↓
PDSProduct Data Sheet
Glass bottle, vial type B, tall, 18 mm, 10 ml · O18SH010BPDF ↓
Plastic Fine Mist Sprayer, Smoke Cap, 18/415 · OVR18PC2PDF ↓
DrawingTechnical drawing
Glass bottle, vial type B, tall, 18 mm, 10 ml · O18SH010BPDF ↓
Plastic Fine Mist Sprayer, Smoke Cap, 18/415 · OVR18PC2PDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.