Amber Plastic Bottle, Black Spray With Glossy Gold Collar, 300 ml

The amber plastic bottle with a volume of 300 ml and the black fine mist sprayer with a glossy gold collar make a ready-to-use set for thin, water-like preparations that are applied as a spray. The amber colour of the plastic reduces light exposure, so the set is suitable for toners, hydrosols, face and hair sprays, as well as room and fabric fragrances. The bottle is made of PET, is lightweight and does not break when dropped, so it holds up in the bathroom, on the road and in the workshop. The black head with a gold collar gives the packaging a finished look without any further modification.

What the set is suitable for

The fine mist sprayer with a 24/410 neck finish is designed for low-viscosity liquids. With each press it dispenses a small dose as a fine mist, so the set is mainly used for:

• Face toners and hydrosols – applied to the face without your hands touching the contents.
• Hair sprays – detangling sprays, refreshing sprays for the lengths, texturising water sprays.
• Body and refreshing sprays – water-alcohol or solubilised fragranced blends.
• Room and fabric sprays – interior fragrances, sprays for linen and curtains.
• Technical and auxiliary solutions – alcohol solutions for disinfecting work surfaces, moulds or tools used in soap and candle making.

A sprayer of this type will not spray thick emulsions, gels or pure oils evenly, and the mechanism quickly becomes clogged with them. For such preparations, choose a bottle with a pump or a disc top closure.

How to work with the set

Fill the bottle up to the nominal volume, not up to the neck. The nominal volume is the amount the bottle is designed for in normal filling. The brimful volume is the physical volume up to the neck, and you can find it in the parameters. The difference between the two values is a reserve for the sprayer’s dip tube, for the air above the liquid and for the expansion of the contents when the temperature changes. If the bottle is filled to the brim, the contents will overflow through the neck when you screw on the sprayer.

The sprayer is screwed onto the neck by hand, without tools. The tube should reach the bottom of the bottle. If it bends when the sprayer is seated, you can shorten it with a sharp knife so that the intake is not blocked. Before the first filling, wash both the bottle and the sprayer, rinse them with clean water and, if needed, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Residual moisture would otherwise dilute the finished preparation.

Good to know

For preparations with a higher proportion of essential oils, strong solvents or concentrated cleaning solutions, we recommend first testing how the bottle and the sprayer behave on a smaller sample. Do not expose the packaging to aggressive chemicals or prolonged heat.

In this set, it is the sprayer that has a declaration of suitability for contact with cosmetic products. The set is not approved for contact with food, so do not use it for food purposes.

Once empty, the bottle can be washed and refilled. After use, rinse the sprayer with clean water and press it several times to flush any remaining contents out of the mechanism. Dried residues would otherwise clog the valve. When switching between different preparations, it is better to replace the sprayer, as the fragrance of the previous contents remains in it.

Closures with the same neck type, that is 24/410, and other ready-made bottle and closure combinations can be found in the Handymade range. If you make your own combination, we recommend checking the seal and the dispensing with your specific formulation. The bottle is made of PET, and the sprayer combines PP and an aluminium collar, so separate the two parts when disposing of them.

Frequently asked questions