GLASS BOTTLES 50 ml
Blue Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 50 ml
Pack size10 ml15 ml30 ml50 ml100 ml
This 50 ml blue glass bottle with a plastic pump is designed for liquid and semi-liquid cosmetic products that are dispensed in small, consistent doses. full description
Lowest price in the last 30 days: €1.41
Total for 1 pcs: €1.41
Quantities add up across all combinations of this bottle.
Product description
This 50 ml blue glass bottle with a plastic pump is designed for liquid and semi-liquid cosmetic products that are dispensed in small, consistent doses. Blue glass limits the amount of light reaching the contents, so it suits serums, facial oils and light emulsions that are sensitive to light and oxidation. The medicine bottle shape with a narrow neck holds the pump firmly, with no play in the neck.
The pump has a glossy black and gold finish and a clear smoky overcap that protects the nozzle from dust and from being pressed accidentally in a bag. The set is supplied as packaging and closure together, so you do not need to look for a matching pump separately.
What the set is suitable for
The pump works best with contents that flow freely or have the consistency of a light cream. With thick creams or butters, the pump jams, draws in air and the dose becomes uneven.
- Facial and hair serums – both water-based and oil-based, where the exact amount per use matters.
- Facial oils and oil blends – blue glass slows the effect of light on the oil.
- Light emulsions and fluids – day creams with lower viscosity, liquid facial lotions, eye emulsions.
- Samples and test batches – 50 ml is enough to verify a recipe in real use before filling a larger volume.
Dispensing and working with the pump
One press dispenses approximately 0.14 ml of the contents. With a facial serum, a usual dose for the face corresponds to one or two presses; with a body oil, the number of presses increases accordingly. The amount per press does not change, which helps when estimating consumption and the number of doses per pack.
After filling the bottle and screwing on the pump, prime it by pressing it several times until the dip tube and piston are filled with the contents. This takes longer with oils and thicker emulsions than with water-based serums.
If the dip tube touches the bottom of the bottle and bends after the pump is screwed on, shorten it with a sharp knife using a diagonal cut just above the bottom. A diagonal end does not stick to the glass and the pump draws the contents down to the last drop.
Nominal and total volume
The nominal volume is the amount the packaging is designed for under normal filling. The total brimful volume is the physical volume up to the neck and is stated in the component parameters. The difference between them is a reserve for the dip tube and the pump body, which push part of the contents upwards once screwed on, and for the expansion of the contents with temperature changes. The bottle is filled up to the nominal volume. If it were filled to the brim, the contents would overflow when the pump is fitted.
Preparation before filling and reuse
Before the first filling, wash the bottle, disinfect it with isopropyl alcohol or ethanol and leave it to dry completely with the neck facing down. To rinse the pump, immerse the dip tube in ethanol or clean water and press the pump several times. Then pump it empty and leave it to dry.
Glass withstands repeated use without any change in its properties and can also be cleaned with hot water. When changing the contents, rinse the pump thoroughly, especially after oil-based products. Their residues in the dip tube and piston thicken over time and slow down the pump. When switching from a scented product to another, bear in mind that the plastic parts of the pump may retain some of the scent.
Good to know
Suitability for contact with cosmetics is documented for the glass bottle. For the pump, we recommend checking its behaviour with your specific formulation, especially for contents with a higher proportion of essential oils, alcohol or solvents, which may affect the plastic parts. The set is not declared for contact with food.
Glass reacts sensitively to sudden thermal shock. Let a hot emulsion cool before filling, and do not place a cold bottle on a hot surface or the other way round.
Closures with the same neck type as stated in the bottle parameters, and other ready-made combinations, can be found in the Handymade range. If you assemble your own set, check the seal, dispensing and behaviour of the packaging with your specific formulation before filling the whole batch.
Once empty and rinsed, the glass bottle belongs in glass recycling. The pump combines polypropylene and aluminium and is recycled according to local rules for mixed packaging.
Frequently asked questions
Parameters
Glass bottle, pharmaceutical, blue, 18 mm, 50 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.





















































































