PLASTIC BOTTLES

Clear Plastic Bottle, Glossy Gold Black Pump with Smoky Overcap, 10 ml

Name: Clear Plastic Bottle, Glossy Gold Black Pump with Smoky Overcap, 10 ml
Brand: Handymade
SKU: O18PP010-OVD18PZCL
Price: 1.1 EUR
Availability: InStock

Pack size10 ml50 ml 100 ml

Plastic bottle with pump, 10 ml is a small pack for serums, facial oils, fluids and other liquid to slightly thick preparations that you want to apply in small, consistent doses. full description

AvailabilityIn stock · 436 pcs

Product codeO18PP010-OVD18PZCL

€1.10incl. VAT

Lowest price in the last 30 days: €1.10

Volume pricing

1–199 pcs€1.10Your price

200–999 pcs€1.03−6 %

1000–4999 pcs€0.98−11 %

from 5000 pcs€0.85−23 %

Total for 1 pcs: €1.10

Quantities add up across all combinations of this bottle.

What's in the set

Plastic bottle, vial, clear, 10 ml

Plastic dispenser, glossy black and gold, smoke top, 18/415

Product description

Plastic bottle with pump, 10 ml is a small pack for serums, facial oils, fluids and other liquid to slightly thick preparations that you want to apply in small, consistent doses. The PET medicine bottle is lightweight, does not break if dropped, and through the clear wall you can see how much content is left. The pump in a glossy black and gold finish with a smoky overcap gives the pack the look of a finished product. It is therefore suitable for customer samples, travel packs and small-batch products.

The set consists of a medicine bottle and a pump with a dip tube, both with the same neck type. The contents reach the pump head through the tube from the bottom, so the bottle is used upright and nothing has to be poured out or dripped. The smoky overcap protects the pump opening from dust and from being pressed accidentally in a bag.

What the set is suitable for

Facial serums and fluids – low viscosity passes through the tube without problems and is dispensed without fingers touching the content.
Facial and hair oils – the pump measures more precisely than a dropper and the oil does not spread over the walls of the bottle.
Oil-based and alcohol-based preparations for spot use – the small volume corresponds to the amount that is used up before the content evaporates.
Samples and travel packs – 10 ml is enough for several weeks of serum use and the pack fits into a cosmetic bag.

Thick creams, butters or preparations with scrub particles do not belong in this set. Thick formulations will not pass through the tube and particles will block the pump valve. For these, choose a jar or a wider bottle with a cap.

Dispensing and filling

One press delivers approximately 0.14 ml, which for a full 10 ml fill corresponds to roughly 70 doses. For serums and oils, this is the amount for one application to the face or the eye area.

After the pump is fitted, it needs several presses to prime before the tube fills and the product starts to come out. Let your customer know on the label or in the instructions, otherwise they may consider the pack faulty.

The pump tube is longer than the 10 ml bottle. Before fitting, shorten it with a diagonal cut so that it ends just above the bottom. A tube that is too short leaves an unused residue at the bottom, while a tube that is too long bends and suction stops working.

Fill only once the product has cooled. The bottle is intended for storage at temperatures up to 30 °C and must be protected from heat, so do not pour hot emulsion or oil into it. Do not fill to the brim, as the tube and the pump valve need space when screwing on.

Nominal and total volume

The nominal volume is the volume for which the bottle is intended under normal filling. Physically, more fits into it up to the neck, but this space is a reserve for the pump tube, the air above the surface and the expansion of the content with temperature changes. Fill to the nominal volume, not to the brim, otherwise the content overflows through the thread when the pump is screwed on.

Good to know

Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. Rinse the pump with disinfectant on the inside as well by pressing it several times, and then let it air out so that alcohol residues do not get into the product.

Clear PET does not protect the content from light. Store vegetable oils sensitive to oxidation, serums with vitamin C or preparations with dyes in the dark or in a box. For longer storage of light-sensitive ingredients, choose dark glass or opaque packaging.

Material and content. Do not expose PET to aggressive chemicals. With a high proportion of essential oils, pure solvents or other aggressive substances, we recommend a test first: fill one bottle, let it stand for several weeks and watch for clouding, softening of the wall or a change of fragrance. Carry out the same test with the pump.

Contact with cosmetics and food. The bottle has a separate declaration of suitability for contact with cosmetic products and a certificate for direct contact with food. The pump is supplied in cosmetic grade and has no declaration for contact with food. The set as a whole is therefore intended for cosmetics, so do not use it for food.

Repeated filling is possible, but after oil or a sticky serum the pump can only be cleaned partially. When changing the content, rinse it with warm water and washing-up liquid, then with disinfectant, and if it dispenses unevenly, replace it with a new one.

Closures with the same neck type and other ready-made combinations can be found in the Handymade range. If you combine a bottle and a closure yourself, we recommend verifying the tightness and dispensing with your specific formulation.

At the end of its life, the bottle belongs in plastics recycling as PET. The pump combines polypropylene and aluminium, so separate it from the bottle before disposal.

Frequently asked questions

Is the plastic bottle with pump, 10 ml, suitable for facial oil?

Yes, facial and hair oils are among the main uses of this set. The pump delivers approximately 0.14 ml of oil per press, which is a dose for the face or the ends of the hair, and the oil does not run down the neck as it does with a dropper. With a high proportion of essential oils, first carry out a compatibility test with the PET and the pump on one bottle.

Why does the pump not dispense after being fitted on the 10 ml bottle?

The most common cause is an unprimed or incorrectly shortened tube. After fitting, the pump needs several presses to prime before the tube fills with the product. If the tube is longer than the bottle, it bends at the bottom and stops drawing up the product, so shorten it before fitting so that it ends just above the bottom. Dispensing is also blocked by solid particles in the contents.

Can the plastic bottle with pump, 10 ml, be refilled?

Yes, the bottle and the pump can be reused. Wash the PET bottle, disinfect it with ethanol or isopropyl alcohol and let it dry. Rinse the pump with warm water and washing-up liquid, and then with disinfectant by pressing it several times. After oils and sticky serums, the valve may not be cleaned completely, so if dispensing is uneven, replace the pump.

Can I fill the bottle with pump set with homemade oils or syrups for food use?

No, the set with the pump as a whole is not approved for contact with food. The certificate for direct contact with food applies only to the bottle, while the pump has no such declaration. The combination of bottle and pump is therefore intended for cosmetic preparations, for example serums, oils or fluids.

Does the clear PET bottle protect the content from light?

No, clear PET lets light through and does not protect the content from it. Store serums with vitamin C, oils prone to oxidation or preparations with natural dyes in the dark or in a box, or choose dark glass or opaque packaging. The advantage of the clear wall is that you can see the remaining content and any clouding.

How many doses does the bottle with pump, 10 ml, deliver?

Roughly 70 presses at a dose of approximately 0.14 ml and filling to the nominal volume. The actual number depends on how much product remains below the end of the tube, so before fitting, shorten the tube so that it ends just above the bottom.