GLASS BOTTLES 30 ml
Blue Glass Bottle, Glossy Golden Black Pump with Smoky Overcap, 30 ml
Pack size10 ml15 ml30 ml50 ml100 ml
The glass bottle with pump is a ready-made combination of a blue glass medicine bottle and a pump for facial serums, facial oils and light emulsions that are taken in small amounts without opening the bottle. full description
Lowest price in the last 30 days: €1.25
Total for 1 pcs: €1.25
Quantities add up across all combinations of this bottle.
Product description
The glass bottle with pump is a ready-made combination of a blue glass medicine bottle and a pump for facial serums, facial oils and light emulsions that are taken in small amounts without opening the bottle. The pump dispenses approximately the same dose with every press, which makes it easier to measure the amount for one application of active serums, and the contents do not come into contact with your fingers.
The 30 ml volume corresponds to a standard pack of serum or facial oil that lasts several weeks. The glossy black and gold pump with a dark smoky overcap gives the packaging the look of a finished product, which is why it is also used by small brands that sell or gift their cosmetics.
How the set works
The pump screws directly onto the neck of the bottle, the tube reaches to the bottom and draws up the contents when the head is pressed. When using it for the first time, press the head several times without dispensing until the tube fills and the pump starts to dispense. One press dispenses approximately 0.14 ml, and one to two presses are usually enough for a standard application of facial serum. The smoky overcap is placed over the head and protects it from dust and from accidental pressing during transport.
The tube is longer than the bottle, so before fitting it is shortened with an angled cut so that it ends just above the bottom. An angled end does not stick to the bottom, and the pump keeps drawing up until most of the contents are used.
What it is suitable for
- Facial serums – the pump dispenses water-based and oil-based serums of low to medium viscosity smoothly and in consistent doses.
- Facial oils and oil blends – vegetable oils and their blends with essential oils are dispensed more precisely than from a bottle with a cap.
- Light emulsions and fluids – lotions, fluids and liquid foundation bases that still pour freely when the bottle is tilted.
- Lash and brow serum, cuticle oil – for products applied to small areas, a small and repeatable dose is suitable.
A pump with a tube only draws up liquid and medium-thick products. A thick cream, body butter or solid gel will get stuck in it. For such contents, choose a jar or a different type of pump.
Nominal volume and brimful volume
The nominal volume of 30 ml is the amount the bottle is designed for under standard filling. The brimful volume stated in the parameters is the physical volume up to the neck. The difference is a reserve for the tube and the body of the pump, which take up part of the space once screwed on, and for the expansion of the contents with temperature changes. Fill up to the nominal volume. If the bottle were filled to the brim, part of the contents would be pushed out through the neck when the pump is fitted.
Before filling for the first time, wash the bottle, disinfect it with isopropyl alcohol or ethanol and let it dry completely. It is enough to rinse the pump with clean water or alcohol and let it drain; do not soak the whole pump for a long time.
Good to know
- Suitability for cosmetics – the glass bottle has a declared suitability for contact with cosmetic products, and the declaration of conformity is provided with the product. No such declaration is available for the pump, so before larger production we recommend checking how its plastic parts behave with your specific formulation.
- Light – blue glass dampens light, but it is not completely opaque. Store serums with light-sensitive ingredients away from direct sunlight.
- Filling temperature – let the emulsion or oil cool to room temperature before filling. Hot contents stress the glass through a sudden change in temperature, and the plastic parts of the pump are not designed for hot filling.
- Position when dispensing – hold the bottle upright when pressing. In a tilted position the end of the tube rises above the surface and the pump draws in air.
- Reuse – after washing and disinfection, the bottle can be used repeatedly. Reuse the pump only for the same type of contents and after thorough rinsing. When it stops drawing up or starts to leak, replace it with a new one.
- Other closures – closures with the same neck type as the bottle and other ready-made combinations are available in the Handymade range. For your own combination, we recommend checking the seal with your specific formulation.
- Recycling – the bottle goes into glass recycling, the pump is made of plastic and aluminium and is separated from the bottle before disposal.
Frequently asked questions
Parameters
Glass bottle, vial, blue, 18 mm, 30 ml
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
























































































