Blue Plastic Bottle, Black Spray, 200 ml

Plastic bottle, blue, with black fine mist sprayer, 200 ml

A ready-made combination of a blue PET bottle with a nominal volume of 200 ml and a black mechanical fine mist sprayer for the fine spraying of thin liquids. The bottle is lightweight and does not break when dropped, so it suits products that are carried in a bag, used in the bathroom or used when working with water. The blue colour gives the product a uniform look.

The set is declared suitable for contact with cosmetic products.

What it is suitable for

The sprayer dispenses the contents as a fine mist, so the set is used mainly for products with a consistency close to water:

• Facial toners and hydrosols – sprayed directly onto the skin, without your hands touching the contents.
• Refreshing and setting sprays – for the face or for make-up, and the 200 ml volume is enough for longer use.
• Hair care sprays – detangling sprays, hydrosols and herbal infusions for the scalp.
• Body sprays and fabric fragrance sprays – alcohol-based and water-based compositions without thickeners.
• Household cleaning sprays – water-based and alcohol-based solutions whose ingredients do not attack plastic.

Thick or oily contents are harder to spray with a mechanical sprayer, the mist is uneven and the nozzle clogs more easily. For pure oils we recommend a bottle with a pump or a dropper instead.

Nominal and total volume

The nominal volume is the volume the bottle is designed for during normal filling. The physical volume up to the neck is larger. The difference provides a reserve for the dip tube and the sprayer head, which take up part of the space once screwed on, and for the expansion of the contents when the temperature changes. The bottle is therefore filled up to the nominal volume, not to the brim. If it were filled up to the neck, the contents would overflow when the sprayer is fitted and the closure might not seat correctly.

Sprayer and dispensing

The sprayer is made of polypropylene (PP), with a ribbed collar for a better grip when screwing it on and a clear dip tube that reaches the bottom of the bottle. The head is operated by pressing with a finger, and the mechanism works without a propellant. One press releases approximately 0.14 ml, which makes it easier to apply toners or sprays evenly without dripping. Before first use, press the head several times without product until the tube fills.

Good to know

Before first filling, we recommend washing the bottle and the sprayer, rinsing them with ethanol or isopropyl alcohol (IPA) and leaving them to dry completely. Moisture in the bottle would dilute the contents and, with water-based products, increases the risk of microbial contamination. Water-based products in this packaging need preservation just as in any other packaging, because the sprayer does not protect them from microbes.

Do not expose the bottle to aggressive chemicals and do not heat it; let hot contents cool down before filling. For mixtures with a higher proportion of essential oils, fragrance compositions or solvents, we recommend testing how the packaging behaves with your specific formulation, ideally on a single piece before larger-scale filling.

The packaging is suitable for repeated use if it is washed thoroughly between fillings and the sprayer nozzle is flushed with clean water. Product residues in the tube and in the mechanism are the most common cause of clogging. The bottle is made of PET and the sprayer of polypropylene; once separated, the two parts are recycled separately.

You will find closures with the same 24/410 neck finish and other ready-made bottle and closure combinations in the Handymade range. If you are making your own combination, we recommend testing the tightness and dispensing with your specific formulation.

Frequently asked questions