White Plastic Bottle with Black Spray, 250 ml

The bottle can be reused if hygiene principles are strictly observed. Before each new filling, both the packaging and the spray pump must be cleaned and disinfected in order to minimise the risk of microbial contamination of your formulation. For disinfection we recommend using high-percentage alcohol, for example IPA 99 % isopropyl alcohol or Ethanol 96 % denatured plant-based. After cleaning, allow all parts of the packaging to dry thoroughly and only then refill and close them again.

The packaging is ideal for liquid preparations that require even spraying in a fine film. It is suitable, for example, for toners, hydrolats, body and hair sprays, aromatherapeutic and interior sprays, hygienic hand solutions as well as gentle cleaning or textile sprays. For significantly thicker or highly oily blends, we recommend performing a test before filling in order to verify the passability and reliable functioning of the spraying mechanism.

Before filling, make sure that the bottle is clean and dry and that no residues of the previous formulation remain inside. Pour the liquid slowly, ideally using a funnel, to prevent foaming and the ingress of a larger amount of air. After filling, leave sufficient space between the liquid level and the neck so that the dip tube can work properly. Screw the spray pump on evenly and firmly, then press the pump several times so that the system fills with the product and the spraying proceeds smoothly.

We recommend storing the packaging in a dry place, protected from direct sunlight and significant temperature fluctuations. During long-term use it is advisable to regularly wipe the outer surface and, if necessary, unscrew the spray pump, rinse it with a suitable medium and allow it to dry. If you change the type of formulation (for example from an aromatherapeutic spray to a cosmetic one), it is advisable to clean and disinfect the packaging in order to prevent any effect on the fragrance, colour or stability of the new product. With proper care, the spray mechanism remains functional and provides an even distribution of the liquid.

If you decide not to reuse the packaging, we recommend recycling it in accordance with the material designation given in the product parameters. First, use up or safely dispose of the remaining contents, then, where possible, separate the packaging into individual parts (bottle body, spray pump and, if applicable, cap) and sort each part into the appropriate container according to the type of plastic and local waste-sorting rules. Thanks to correct recycling, the material can be recovered and the amount of waste in the municipal system is reduced.

The simplest way to select a suitable bottle, jar or other packaging is to use the extended filter in the packaging material category. The extended filter is located at the top of the page after clicking on the relevant category on the website. It allows you to filter available packaging according to key parameters such as neck type and size, overall packaging size, colour or material. This allows you to quickly find packaging that meets both the technical requirements and the visual character of your product.