PLASTIC BOTTLES
Clear Plastic Bottle, Black Ribbed Plastic Cap, 500 ml
Pack size100 ml150 ml200 ml250 ml500 ml
A clear plastic bottle with a volume of 500 ml and a black ribbed cap makes a ready-to-use set for filling larger quantities of liquid and semi-liquid cosmetics . full description
Lowest price in the last 30 days: €0.75
Total for 1 pcs: €0.75
Quantities add up across all combinations of this bottle.
Product description
A clear plastic bottle with a volume of 500 ml and a black ribbed cap makes a ready-to-use set for filling larger quantities of liquid and semi-liquid cosmetics. The clear PET shows the colour and the remaining amount of contents, the bottle is lightweight and, unlike glass, does not break when dropped. It is suitable for shower gels, shampoos, liquid soaps, body lotions, massage and bath oils, or for storing hydrosols and intermediate products in your workshop.
The 24/410 cap is tightened by hand, and the ribbed surface keeps a good grip even with wet fingers. The packaging material of both the bottle and the cap is declared suitable for use with cosmetic products.
What the set is suitable for
- Rinse-off cosmetics – shower gels, shampoos and liquid soaps in a volume that corresponds to a standard bathroom pack. The contents are dispensed by unscrewing the cap or are gradually decanted into a smaller bottle with a pump.
- Body lotions and thin emulsions – textures that can be poured through the 24/410 neck. Thick creams and butters belong in jars or containers with a wide neck.
- Oils and hydrosols in larger quantities – massage and bath oils, hydrosol stock or oil blends before they are decanted into smaller packaging. Light-sensitive ingredients are better kept in dark glass or in the dark.
- Workshop stock – a prepared water phase, diluted surfactants, distilled water or other intermediate products that you need to keep labelled and closed.
Volume, filling and closure
The nominal volume of 500 ml is the amount the bottle is designed for in standard filling. More fits up to the neck, but this difference serves as a reserve for the cap and for the expansion of the contents when the temperature changes. For this reason, fill the bottle to the nominal volume, not to the brim. For a larger batch, a measuring cup or scales will help you fill all the bottles equally.
The cap seals with a foamed polyethylene (EPE) liner, which sits against the rim of the neck once tightened. It is tightened by hand, without tools. The 24/410 neck finish is a widely used thread type, so other closures with the same neck finish from the Handymade range also fit the bottle. For your own combination, we recommend checking the tightness and the behaviour of the packaging with your specific formulation.
Before filling the whole batch, test one bottle: fill it to the nominal volume, tighten the cap, turn it upside down and leave it standing for several hours. This lets you check the tightness of the cap with your formulation before dispatch.
Good to know
Before the first filling, wash and rinse the bottle and the cap and disinfect them with ethanol or isopropyl alcohol. Then leave them to dry completely upside down. Residual water would dilute the finished product and burden the preservative system.
PET withstands standard cosmetic formulations, but not hot contents. Let liquid soaps, gels or emulsions cool to room temperature before filling. Do not place the bottle in direct sunlight or next to a heat source, as heat can soften and deform the material.
Clear plastic does not protect the contents from light. Products with essential oils, plant extracts or vitamins that degrade in light belong in amber or blue glass, or at least in a dark cabinet.
Do not pour undiluted essential oils, solvents or aggressive chemicals into a PET bottle. For formulations with a higher proportion of essential oils or high-percentage alcohol, check the behaviour of the bottle and the sealing liner beforehand on a single piece.
The set is intended for cosmetics. Neither the bottle nor the cap has a food-contact certificate, so it is not suitable for homemade oils, syrups or drinks.
After washing, the bottle can be reused. For recycling, separate the PP cap from the PET bottle, as each material is sorted separately.
Frequently asked questions
Parameters
Plastic bottle, clear 24/410, 500 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 500
- Diameter
- 67 mm
- Thread type
- 24/410
- Height
- 177 mm
Plastic cap, 24/410, ribbed black
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
































































