+421 950 333 113info@handymade.store−10 %Shop now

ECO GLITTERS

EcoSparks Glamour Series, Red, 10 g

Pack size10 g100 g

Red eco glitter gives cosmetics a striking red sparkling effect without plastic. Instead of plastic film, it is made of synthetic mica with a surface layer of red iron oxide, so the base is purely mineral. full description

AvailabilityIn stock · 26 packs
Product codeFGE040_10
Batch3164G
Best before12/2028
€3.14incl. VAT€314.00/kg

Lowest price in the last 30 days: €3.14

Product description

Red eco glitter gives cosmetics a striking red sparkling effect without plastic. Instead of plastic film, it is made of synthetic mica with a surface layer of red iron oxide, so the base is purely mineral. It is used in decorative cosmetics for the face, eye area, lips and nails, and suits both leave-on and rinse-off products.


Key features

  • Mineral composition – synthetic mica (Synthetic Fluorphlogopite) makes up 85–95% and red iron oxide 5–15%. The glitter contains no nanomaterials.
  • Distinct sparkle – the particles average 80–400 µm, so they stay visible in the mass as individual sparkles and do not colour the product evenly the way a fine pigment does.
  • Heat resistance – thermal stability reaches up to 800 °C. Melting wax or soap base, or heating an emulsion, does not harm it.
  • Odourless – it does not affect the fragrance of the finished product.
  • Cosmetic dye purity – it meets the requirements for cosmetic dyes under Annex IV of Regulation (EC) No 1223/2009, including the heavy metal limits. The total microorganism count is below 100 CFU/g.

Use in formulations

The glitter does not dissolve in water or in oil; it only disperses in both. Add it at the end, to the finished or nearly finished mixture, and stir it in evenly.

Whether the sparkles stay evenly dispersed depends on the viscosity of the product. The particles are large and in thin products they may sink to the bottom. In thicker bases they hold better.

In anhydrous products, keep in mind that the powder binds oil. About 65–85 g of oil is absorbed per 100 g of glitter. In addition, synthetic mica also acts as a filler in a formulation and may slightly increase viscosity.

At a higher usage rate in balms, lip glosses or oil serums, the glitter may thicken the mixture and reduce its gloss. Take this into account when putting together your formulation.

The recommended pH range of the formulation is 6.0–9.0. Do not add the glitter to strongly acidic products without testing.


Suitable for products such as

  • Eyeshadows and highlighters – the sparkles stand out directly on the skin.
  • Lip glosses and lip balms – into an oil or wax base.
  • Nail products – for decorative sparkling layers.
  • Glycerine soaps and other rinse-off products – into melted soap base or thicker gels in which the sparkles do not settle.

How it differs from plastic glitter and pearl pigments

The main difference is the material. Conventional glitter is made from plastic film. Eco glitter has a carrier of synthetic mica, an industrially prepared mineral with a more consistent composition and purity than mica mined in nature.

It differs from pearl pigments in particle size. A pearl pigment is a fine powder that gives a product a continuous sheen. Glitter, with particles in the hundreds of micrometres, creates individual shining points.


Good to know

The glitter is a dry powder and may become airborne when weighed. Always scoop it with a dry spoon.

Do not inhale the dust while working. We recommend wearing a dust mask and eye protection. Wash your hands before and after work.

The raw material is not classified as hazardous under the CLP Regulation. We recommend checking the stability and appearance of the finished product on a test batch, especially whether the sparkles settle over time.


Frequently asked questions

Is red eco glitter soluble in water or in oil?
No, eco glitter does not dissolve in water or in oil; it only disperses in both. It consists of synthetic mica with iron oxide, which are insoluble mineral particles. It is added to the product at the end and must be stirred in thoroughly so that the sparkles are distributed evenly throughout the mass.
Can eco glitter be used on the lips and around the eyes?
Yes, red eco glitter is intended for the face, the eye area, lips and nails. It meets the requirements for cosmetic dyes under Annex IV of Regulation (EC) No 1223/2009, including the heavy metal limits, and contains no nanomaterials. It can be used in both leave-on and rinse-off products.
Does eco glitter withstand heat when melting wax or soap base?
Yes, eco glitter is thermally stable up to 800 °C. Melting wax or soap base, or heating an emulsion, does not harm it. It is added to the product at the end, to the finished or nearly finished mixture, in which it must be stirred in evenly.
Why does eco glitter sink to the bottom of the product?
Glitter sinks when the product is too thin. The particles average 80–400 µm and do not dissolve in water or in oil, so the viscosity must keep them suspended in the mass. In thicker bases, such as gels, creams or balms, they hold better. In thin oils and water-based solutions they may settle.
What is the difference between eco glitter and conventional glitter?
Eco glitter contains no plastic. Conventional glitter is made from plastic film, whereas eco glitter consists of synthetic mica with red iron oxide on the surface. Its composition is purely mineral and withstands high temperatures, so it can also be added to melted wax or soap base.

Parameters

INCI
Synthetic Fluorphlogopite, Iron Oxide Red
CAS No.
12003-38-2, 1309-37-1
EC number
234-426-5, 215-168-2
CI number
CI 77491N/A, 77491
Product colour
Red
Country of origin
Spain
Processing method
Surface treatment
Appearance
Powder
Formulation phase
Post-addition
Function in formulation
Colorant
Application area
FaceEye areaLipsNails
Recommended formulation pH range
6,00 – 9,00
Application type
Leave-onRinse-off
Suitable for
All skin types
Biodegradability
Not applicable
Natural Index (NI ISO 16128)
0,00
Natural Origin Index (NOI ISO 16128)
1,00
Organic content
0 %
Renewable Carbon Content (RCC)
0 %

Product documentation

CoACertificate of Analysis
batch 3164GPDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

2 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.