+421 950 333 113info@handymade.storeHandymade Days: −10 % on all ready-made productsShop now

LIQUID DYES – KLASIK

Liquid Glycerin Dye, Chocolate, 100 ml

Pack size10 ml50 ml100 ml

Liquid glycerine dye in the shade Chocolate colours soaps, bath bombs, bath salts and shower products chocolate brown . full description

AvailabilityIn stock · last 2 packs
Product codeFT240_100
€13.99incl. VAT€139.90/l

Lowest price in the last 30 days: €13.99

Product description

Liquid glycerine dye in the shade Chocolate colours soaps, bath bombs, bath salts and shower products chocolate brown. The colour components are already mixed into a liquid glycerine base, so you only measure and stir the dye into the mixture, with no need to disperse a powder. It is intended for rinse-off cosmetics for the body and hands.


How it colours

The brown shade is created by mixing four dyes: yellow, red, blue and green. This means you do not need to build the brown from several colours.

The intensity is controlled by the amount used. A smaller amount gives a lighter brown tone, and the colour darkens as the amount increases. The base itself also affects the result. In a clear base the colour looks cleaner and darker, in a white or cream base softer and lighter.


Use in formulations

The dye is water-soluble. It is added to the water phase or afterwards to the finished mixture and stirred in evenly. The recommended usage rate is 0.1–3%.

The dye base consists of glycerine and water. It also contains the surfactant Sodium Laureth Sulfate, the thickener Hydroxyethylcellulose and the preservative Phenoxyethanol. Keep the surfactant in mind for products that are meant to be sulfate-free.

Start at the lower end of the usage rate and add the dye in small amounts until the mixture reaches the desired shade. A colour that is too dark can only be lightened by adding more uncoloured mixture.


Suitable for products such as

  • Soaps – lighter and darker brown shades depending on the amount used.
  • Bath bombs and bath salts – brown colouring of the whole mixture.
  • Shower and bath products – shower gels, bubble baths and similar rinse-off products with a water phase.

Good to know

We recommend checking the shade of the finished product on a small test batch. The same amount of dye looks different in different bases. In addition, the colour in a liquid mixture may differ from the colour after it has set or dried.

The dye is classified under the CLP Regulation and marked with the GHS07 warning pictogram. When working with it, follow the instructions in the safety data sheet.


Frequently asked questions

How much liquid glycerine dye should be added to soap?
Add 0.1–3% of liquid glycerine dye to soap. The same range applies to bath bombs, bath salts and shower or bath products. It is worth starting at the lower end and adding the dye gradually until the mixture reaches the desired shade. A dark colour can only be lightened by adding more uncoloured mixture.
Is the Chocolate liquid dye water-soluble?
Yes, the Chocolate liquid glycerine dye is water-soluble. It is added to the water phase or afterwards to the finished mixture and stirred in until the shade is even. It is supplied in liquid form, so you do not need to dissolve or disperse it beforehand like powder dyes.
Can liquid glycerine dye be used in a cream or body lotion?
No, liquid glycerine dye is intended for rinse-off products only. It belongs in soaps, bath bombs, bath salts and shower or bath products for the body and hands. It is not used in creams, body lotions, balms or other leave-on cosmetics.
How can I achieve a lighter or darker brown shade with the Chocolate liquid dye?
The shade is adjusted by the amount of dye. A smaller amount gives a lighter brown, a larger one a darker brown. The base also affects the result: in a clear mixture the colour is darker and cleaner, in a white one lighter. It is best to check the exact shade on a small test batch, because the colour after setting or drying may differ from the colour of the liquid mixture.
Does liquid glycerine dye contain parabens or allergens?
The Chocolate liquid glycerine dye does not contain parabens or fragrance allergens that must be declared on the label of a cosmetic product. It contains Phenoxyethanol as a preservative. Its base consists of glycerine and water, supplemented with the surfactant Sodium Laureth Sulfate and the thickener Hydroxyethylcellulose.

Parameters

INCI
Glycerin, Aqua, Sodium Laureth Sulfate, Phenoxyethanol, Hydroxyethylcellulose, CI 11680, CI 12490, CI 74160, CI 74260
CAS No.
56-81-5, 7732-18-5, 68891-38-3, 122-99-6, 9004-62-0, 2512-29-0, 6410-41-9, 147-14-8, 1328-53-6
Product colour
Brown
Country of origin
European Union
Processing method
Blending
Formulation phase
Water phasePost-addition
Function in formulation
Colorant
Application area
BodyHands
Recommended usage rate
0,1 – 3 %
Solubility
Water-soluble
Application type
Rinse-off
Volume
100 ml

Product documentation

TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

1 PDF file in one archive

Karine B.9 Nov 2026FR

Verified purchase