+421 950 333 113info@handymade.store−10 %Shop now

MICA POWDERS

MICA AquaPearls, Mulberry Wine, 500 g

Pack size10 g50 g200 g500 g

Mica AquaPearls Mulberry wine is a pearlescent pigment that colours products wine red and gives them shine. It consists of mica and red iron oxide. full description

AvailabilityIn stock · last 1 pack
Product codeFM998_500
Batch111238
Best before08/2031
€89.99incl. VAT€179.98/kg

Lowest price in the last 30 days: €89.99

Product description

Mica AquaPearls Mulberry wine is a pearlescent pigment that colours products wine red and gives them shine. It consists of mica and red iron oxide. It is mixed into the water phase or into the finished mixture, hot or cold.

It is used mainly in bath bombs and salts, decorative cosmetics, shower and bath products, and in hobby crafts.


How the pigment colours

The colour and shine come from two components, each with a different role. Red iron oxide (CI 77491) is the source of the wine red shade. Mica (CI 77019) consists of tiny flakes that reflect light, which creates the pearlescent shine.

The pigment differs from water-soluble dyes in the way it colours. A soluble dye colours water evenly and transparently. The pigment stays in the product as particles with an average size of 10–60 µm, dispersed throughout the mass. The particles also reflect light, and the result is a colour with shine.


Use in formulations

The pigment is not soluble in water or in oil; it only disperses in water. It is added to the water phase or afterwards into the finished mixture.

There is no limit on processing temperature. The pigment is heat stable up to 800 °C and can be added to a hot or a cold phase.

The usage rate is 1–30% and is chosen according to the required intensity of colour and shine. The recommended pH range of the formulation is 7.0–10.0.

The powder absorbs 60–90 g of oil per 100 g. This figure can be used to estimate how much oil is needed to disperse the pigment in an anhydrous product.


Suitable for products such as

  • Bath bombs and salts – the pigment is mixed into the blend and disperses in water.
  • Decorative cosmetics – a wine red shade with a pearlescent shine.
  • Shower and bath products – rinse-off products with a pearlescent effect.
  • Body and hair care – both rinse-off and leave-on products.
  • Nail care – products intended for nails and hands.
  • Hobby crafts – artistic and creative projects.

It can be used in products for the face, body, hair, scalp, hands, feet and nails.


Good to know

The powder is odourless. In thin liquid products, the pigment particles may settle to the bottom over time. We recommend checking the stability of the finished product on a small test batch.

The pigment comes from Spain. It meets the purity criteria for colorants, including the heavy metal limits under Annex IV of Regulation (EC) No 1223/2009, and contains no nanomaterials. It is not classified as hazardous under the CLP Regulation.

When working with the powder, avoid inhaling the dust. Use a mask and eye protection, and wash your hands afterwards.


Frequently asked questions

Is mica AquaPearls Mulberry wine soluble in water?
No, mica AquaPearls Mulberry wine does not dissolve in water; it only disperses in it. After mixing, the pigment particles spread through the water phase and give it a wine red colour with a pearlescent shine. It is not soluble in oil either. In a formulation, it is added to the water phase or afterwards into the finished mixture.
How much Mulberry wine pigment should be added to a product?
The recommended usage rate of Mulberry wine pigment is 1–30%. The amount is chosen according to how intense the colour and shine of the finished product should be. A lower dose gives a softer shade, a higher one a richer colour and a more pronounced shine. The range applies to both rinse-off and leave-on products.
Can mica Mulberry wine be added to the hot phase?
Yes, mica Mulberry wine can be added to a hot or a cold phase. The pigment is heat stable up to 800 °C and there is no limit on processing temperature. It can be heated together with the water phase or mixed into the finished mixture. The choice depends on which suits your production process better.
Can mica AquaPearls Mulberry wine be used in an anhydrous product?
Yes, in an anhydrous product, mica AquaPearls Mulberry wine is dispersed in oil. The powder absorbs 60–90 g of oil per 100 g, which helps to estimate the amount of oil needed to disperse it. The pigment stays in the mass as particles. The evenness of the colour depends on thorough mixing.
What is the difference between mica and a water-soluble dye?
Mica is an insoluble pigment, whereas a water-soluble dye dissolves completely in water. The dye colours a liquid evenly and transparently, without shine. Mica stays in the product as tiny flakes that reflect light and, besides colour, gives the product a pearlescent shine.

Parameters

INCI
Mica, Iron Oxide Red
CAS No.
12001-26-2, 1309-37-1
EC number
310-127-6, 215-168-2
CI number
77019, 77491
Product colour
Red
Country of origin
Spain
Processing method
Surface treatment
Appearance
Powder
Formulation phase
Water phasePost-addition
Function in formulation
Colorant
Recommended processing temperature
Bez obmedzenia °C
Recommended usage rate
1 - 30 %
Recommended formulation pH range
7,00 – 10,00
Application type
Leave-onRinse-off
Biodegradability
Not applicable
Natural Index (NI ISO 16128)
0,00
Natural Origin Index (NOI ISO 16128)
1,00
Organic content
0 %
Renewable Carbon Content (RCC)
0 %

Product documentation

CoACertificate of Analysis
batch 111238PDF ↓
batch 111229PDF ↓
batch 118PDF ↓
TDSTechnical Data Sheet
Physical parameters and processingPDF ↓
SDSSafety Data Sheet
Available for purchased products —
Download all (ZIP)

4 PDF files in one archive

Marianna H.13 Oct 2026SK

Verified purchase

Variant: MICA, AquaPearls, Mulberry wine, 10 g

Nicolas D.1 Oct 2026FR

Verified purchase

Variant: MICA, AquaPearls, Mulberry wine, 10 g