PLASTIC BOTTLES
Rounded Clear Plastic Bottle 24/410, Silver Cap, 500 ml
Pack size100 ml150 ml200 ml300 ml500 ml
A clear plastic bottle with a volume of 500 ml and a matte silver cap with a 24/410 neck finish, supplied as a ready-to-fill set. full description
Lowest price in the last 30 days: €1.03
Total for 1 pcs: €1.03
Quantities add up across all combinations of this bottle.
Product description
A clear plastic bottle with a volume of 500 ml and a matte silver cap with a 24/410 neck finish, supplied as a ready-to-fill set. The clear PET lets you see both the colour of the product and its level, so it suits cosmetics where the contents should be visible: shower gels, shampoos, conditioners, body lotions, massage oils or toners in a larger size. The bottle is light and does not break when dropped, which makes it a good choice for the bathroom and anywhere glass would be a risk.
Both the bottle and the cap are declared suitable for contact with cosmetics. The set is not approved for contact with food.
What it is suitable for
- Shower gels and shampoos – a volume of 500 ml corresponds to a typical family size, and after unscrewing the cap the product is dispensed by pouring it into your palm.
- Body lotions and conditioners – thinner emulsions that flow out of the rounded bottle even without a pump. Thicker creams require a wider neck or a jar.
- Massage and body oils – through the clear wall you can see both the colour of the oil and how much of it is left.
- Hydrosols, toners and facial waters – water-based products without a high proportion of alcohol, especially as a refill bottle from which a smaller bottle with a sprayer is topped up.
- Working and storage packaging – when making a larger batch, it serves as an intermediate store for the finished product or for liquid raw materials, for example glycerine or surfactants, which are then transferred into retail packaging.
Volume and filling
The nominal volume of 500 ml is the volume the bottle is designed for in normal filling. The brimful capacity, given in the parameters, is the physical volume of the bottle up to the neck. The difference between them leaves room for the cap and for the expansion of the contents when the temperature changes. For this reason, fill to the nominal volume so that the level does not reach the thread. With thick products, a funnel or a dispensing bottle helps to keep the contents off the thread so that the cap seals cleanly.
Before the first filling, wash the bottle and the cap, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely with the neck facing down. Residual water in the packaging would get into the product and put extra strain on its preservative system.
Good to know
Clear PET does not protect the contents from light. Products with oils prone to oxidation, with vitamin C or with other light-sensitive ingredients are better placed in amber or blue glass, or you can store this bottle away from direct sunlight. For shower gels, shampoos and body lotions with a standard preservative and antioxidant, the clear wall is not a problem.
The wall of the bottle tolerates heat only to a limited extent. Pour in the product only after it has cooled. A hot emulsion or hot oil can deform the PET and change the shape of the neck, which then will not seal.
Undiluted essential oils, concentrated fragrance compositions and solvents do not belong in this bottle, as PET is not designed for them. PET is used as standard in finished cosmetic products with a typical proportion of fragrance ingredients. With a higher content of alcohol or fragrance substances, we recommend checking how the wall of the packaging behaves with your specific formulation.
The matte silver cap combines aluminium and plastic and can be tightened by hand. With thin liquids that will be transported, check the seal by turning the full bottle upside down and pressing briefly on the wall. You will find other closures for a 24/410 neck finish, as well as ready-made combinations of a bottle with a pump or sprayer, in the Handymade range. If you make your own combination, we recommend checking the seal, the dispensing and the behaviour of the packaging with your specific product.
The bottle can be reused. After washing and disinfection, leave it to dry and check the thread of both the bottle and the cap before the next filling. PET, which the bottle is made of, is one of the commonly recycled plastics. Before disposal, unscrew the cap, which is made of a combination of aluminium and plastic, and sort it separately.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 500 ml
- Product colour
- Clear
- Country of origin
- European Union
- Nominal capacity
- 500
- Brimful capacity
- 522 ml
- Diameter
- 61,5 mm
- Thread type
- 24/410
- Height
- 206,5 mm
Silver Mat Plastic Cap, 24/410
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.




















































