PLASTIC BOTTLES
Rounded Clear Plastic Bottle, White Lotion Pump With Glossy Silver Collar, 200 ml
Pack size100 ml150 ml200 ml300 ml
The dispensing set, made up of a clear PET bottle ( 200 ml ) and a white and silver pump with a 24/410 neck finish, is designed for liquid and semi-liquid products: body lotions, liquid soaps, shampoos, shower gels and… full description
Lowest price in the last 30 days: €1.27
Total for 1 pcs: €1.27
Quantities add up across all combinations of this bottle.
Product description
The dispensing set, made up of a clear PET bottle (200 ml) and a white and silver pump with a 24/410 neck finish, is designed for liquid and semi-liquid products: body lotions, liquid soaps, shampoos, shower gels and lighter creams. The contents are released by pressing the pump head, and one dose is approximately 1 ml. The product is therefore dispensed in small amounts, without unscrewing the closure. The clear wall shows the colour, the consistency and the remaining amount.
PET is lightweight and does not break when dropped, which suits the bathroom, travel and parcels sent to customers. The pump is made of plastic and aluminium. The white head with a silver accent suits both neutral and coloured designs in the series.
What the set is suitable for
- Body lotions and light creams – thinner emulsions pass through the pump without problems and are dispensed hygienically, without fingers touching the contents of the bottle.
- Liquid soaps and cleansing hand gels – a dose of 1 ml corresponds to a typical single hand wash, so the set also works well as a bottle that stays beside the sink.
- Shampoos, conditioners and shower gels – 200 ml is a handy size for travel or for testing a new recipe with a smaller group of customers.
- Massage and body oils – oils are dispensed easily, but because the bottle is clear, it is worth keeping them away from light.
- Facial cleansing milks and toners – low-viscosity products pass through the pump without leaving a residue in the tube. For toners, consider whether 1 ml per press is too much.
Filling and dispensing
The bottle is filled up to the nominal volume of 200 ml, not to the brim. The brimful capacity is larger. The difference between it and the nominal volume is a reserve for the pump’s dip tube and for the expansion of the contents when the temperature changes. After filling, the pump is screwed onto the 24/410 neck, and a few presses draw the product into the tube. The first doses are often incomplete.
Thick creams and masks can clog the pump or may not come out of it at all. For a consistency thicker than body lotion, we recommend filling one bottle as a trial and checking whether the dose comes out evenly and whether the product dries out in the tube. A small amount that the tube cannot reach always remains at the bottom.
Before the first filling, rinse the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Moisture trapped in the tube would dilute the first doses of water-based formulations and put unnecessary strain on the preservative system.
Good to know
Clear PET does not protect against light. Formulations sensitive to oxidation, for example oils with a higher proportion of unsaturated fatty acids, or products containing dyes and vitamins, should be kept in a cupboard or on a shaded shelf. If you need the packaging itself to protect the contents, choose dark glass or opaque plastic instead.
PET should only be filled with a product that has cooled down. Heat deforms the material, and the neck may then fail to seal. The bottle is also not intended for aggressive chemicals. For formulations with a high proportion of essential oils, alcohol or solvents, we therefore recommend testing them several weeks in advance and watching for softening of the wall, cloudiness or odour.
A declaration of suitability for contact with cosmetic products is available for the bottle. We do not have such a declaration for the pump, so the set as a whole is not declared as suitable for contact with cosmetics. We recommend verifying compatibility with your specific formulation through your own testing.
The set can be used repeatedly, but when you change the formulation it is safer to fit a new pump, because residues in the mechanism cannot be removed reliably. The 24/410 neck also accepts other closures with the same thread type from the Handymade range; if you combine them yourself, we recommend checking the seal.
For recycling, the pump is unscrewed and sorted separately, and the PET bottle is made of a commonly recyclable plastic.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 200 ml, without cap
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.


































































