+421 950 333 113info@handymade.storeActive Days: −10 % with code ACTIVE10Shop now

PLASTIC BOTTLES

Rounded Clear Plastic Bottle, Type B, White Lotion Pump With Glossy Silver Collar, 300 ml

Pack size100 ml150 ml200 ml300 ml

The 300 ml plastic bottle with pump is a set designed for liquid and semi-liquid cosmetic products that are dispensed by pressing: body lotions, liquid soaps, shampoos, shower gels, conditioners or light creams. full description

AvailabilityIn stock · 176 pcs
Product codeO24PP300B-OVD24BS
€1.44incl. VAT

Lowest price in the last 30 days: €1.44

Save €0.02 with this set

Volume pricing
1–263 pcs€1.44Your price
264–1055 pcs€1.34−7 % · 1× plato
1056–5015 pcs€1.24−14 % · 4× plato
from 5016 pcs€1.09−24 % · 19× plato

Total for 1 pcs: €1.44

Quantities add up across all combinations of this bottle.

Product description

The 300 ml plastic bottle with pump is a set designed for liquid and semi-liquid cosmetic products that are dispensed by pressing: body lotions, liquid soaps, shampoos, shower gels, conditioners or light creams. The clear PET shows the contents and how much is left, and the bottle is light and does not break when dropped, which suits the bathroom, the sink or travel. The white and silver pump with a 24/410 neck finish dispenses approximately 1 ml of product per press, so the dose is repeatable and there is no unnecessary waste.

The set consists of a type B bottle with a round cross-section and a plastic pump with a long dip tube. Both parts have the same neck type, so they fit together without any adjustment. For finished products that go to the customer, the white head with a silver rim looks neutral.


What it is good for

  • Body lotions and light creams – the pump handles thinner emulsions that can be drawn up through the tube; thick, ointment-like textures are difficult to dispense with it.
  • Liquid soaps and shower gels – a 1 ml dose is enough for one hand wash, while a shower gel needs several presses.
  • Shampoos and conditioners – the 300 ml volume matches a standard shower-size pack, and the clear wall shows when the contents are running low.
  • Cleansing milks and micellar products – one press onto a cotton pad without opening the packaging.
  • Massage and body oils – only for oils without a high proportion of essential oils; more in the Good to know section.

Nominal volume and filling

The nominal volume of 300 ml is the amount the bottle is designed for under normal filling. The physical volume to the brim is larger, and this difference provides room for the pump’s dip tube, the air above the surface and the expansion of the contents when the temperature changes. Fill the bottle to the nominal volume. If it were filled to the brim, the contents would overflow through the neck when the pump is screwed on, and the pump would be harder to prime.

Before first use, press the pump head several times without product until the tube fills with the contents and the dose starts to come out evenly. With thicker emulsions this takes longer than with liquid soap.


Good to know

Suitability for cosmetics and food. The bottle has a declaration of suitability for contact with cosmetic products. No such declaration is available for the pump, so suitability for contact with cosmetics is not declared for the set as a whole, and we recommend checking how the pump behaves with your specific formulation. The set is not approved for contact with food and is not intended for homemade oils, syrups or drinks.

PET and the composition of the contents. PET withstands water-based and emulsion products, liquid soaps and most vegetable oils. Aggressive chemicals, higher concentrations of essential oils, alcohol or other solvents can soften or cloud the wall over time. For such formulations, we recommend testing in a single bottle for several weeks before a larger production run.

Temperature. Let a hot emulsion or soap base cool to room temperature first. PET deforms at higher temperatures, and the bottle may lose its shape or the tightness of its neck.

Viscosity. The pump draws the contents up through a thin tube, so it has limits with thick textures. If it dispenses intermittently or “jams”, the formulation is too thick for this type of closure and is better suited to a jar or tube.

Air in the packaging. With every press, air enters the bottle to replace the dispensed contents. Take this into account when formulating products that are sensitive to oxidation.

The clear wall does not protect the contents from light. Store products containing sensitive vegetable oils, vitamins or dyes away from direct sunlight, or choose packaging made of a darker material.


Preparation and reuse

Before first filling, wash the bottle and the pump in warm water with a cleaning product, rinse them, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Flush the pump tube by immersing it in the solution and pressing the head several times. Then pump clean water through in the same way and let it drain.

The set can be used repeatedly. When you change the contents, also clean the inside of the pump thoroughly, where residues of the previous product remain. The PET bottle belongs in separately collected plastic waste. The pump contains both metal and plastic parts, so separate it from the bottle before recycling.

A damaged pump can be replaced with another closure with the same neck type, which you will find in the Handymade range together with ready-made bottle and closure combinations. For your own combination, we recommend checking the tightness and dispensing with your specific formulation.


Frequently asked questions

How much does the pump dispense per press?
One full press of the pump dispenses approximately 1 ml of product. This value applies to liquid and moderately thick products; with thicker emulsions the dose may be smaller until the tube is completely filled. With liquid soap, one press is enough for washing your hands, while with body lotion you press several times as needed.
Is the clear plastic bottle with pump suitable for oils?
Pure vegetable oils and oil blends without a high proportion of essential oils can be filled into the PET bottle with pump. With oils containing a higher concentration of essential oils or a proportion of solvents, PET may soften over time, so we recommend testing in a single bottle first. The clear material does not protect the oil from light, so store the bottle away from direct sunlight.
Can the bottle with pump be filled with a hot emulsion?
No, the PET bottle is filled only after the contents have cooled to room temperature. At a higher temperature the plastic deforms, the bottle may lose its shape and the neck will stop sealing properly with the pump. After production, let the emulsion or liquid soap cool while stirring continuously, and only then fill the bottle.
Why is the pump not dispensing, or dispensing only intermittently?
The most common cause is a tube that has not filled or contents that are too thick. With a new or freshly cleaned pump, press the head several times without product until the tube fills. If dispensing remains intermittent even then, the formulation is too viscous for the dip tube and is better suited to a jar or tube.
Is the bottle and pump set suitable for food?
No, this set is not approved for contact with food and should not be used for homemade oils, syrups or drinks. The bottle has a declaration of suitability for contact with cosmetic products, but no such declaration is available for the pump. The set is intended for cosmetic and technical use.
How do I clean the bottle with pump for repeated use?
Wash the bottle in warm water with a cleaning product, rinse it and disinfect it with isopropyl alcohol or ethanol. Pump the cleaning solution through the pump and then clean water, to remove residues from inside the head and the tube. Leave both parts to dry completely before filling again, otherwise residual water will dilute the contents and weaken the preservative system.

Parameters

Plastic bottle, clear round, type B, 24/410, 300 ml, without cap

Product colour
Clear
Country of origin
India
Nominal capacity
300
Brimful capacity
317 ml
Diameter
58 mm
Thread type
24/410
Height
146 mm
Product material
PETPlastic

Plastic dispenser, 24/410, white-silver, 180 mm

Product colour
SilverWhite
Country of origin
China
Diameter
27,5 mm
Thread type
24/410
Height
205 mm
Dose
1 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Plastic bottle, clear round, type B, 24/410, 300 ml, without cap · O24PP300BPDF ↓
Plastic dispenser, 24/410, white-silver, 180 mm · OVD24BSPDF ↓
PDSProduct Data Sheet
Plastic bottle, clear round, type B, 24/410, 300 ml, without cap · O24PP300BPDF ↓
Plastic dispenser, 24/410, white-silver, 180 mm · OVD24BSPDF ↓
DrawingTechnical drawing
Plastic bottle, clear round, type B, 24/410, 300 ml, without cap · O24PP300BPDF ↓
Plastic dispenser, 24/410, white-silver, 180 mm · OVD24BSPDF ↓
Download all (ZIP)

6 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.