PLASTIC BOTTLES
Rounded Clear Plastic Bottle, White Pump, 150 ml
Pack size100 ml150 ml200 ml300 ml
A clear PET bottle with a volume of 150 ml and a white pump make up ready-to-use packaging for liquid and medium-thick products. full description
Lowest price in the last 30 days: €0.89
Save €0.05 with this set
Total for 1 pcs: €0.89
Quantities add up across all combinations of this bottle.
Product description
A clear PET bottle with a volume of 150 ml and a white pump make up ready-to-use packaging for liquid and medium-thick products. One press of the pump dispenses a measured amount from the bottle, while the rest of the contents stay sealed and your hand does not touch them, unlike with a jar. The clear plastic lets you see the colour and the level of the contents, so it is immediately obvious how much product is left in the bottle.
The 150 ml volume suits home production as well as smaller batches for customers. The bottle is light and does not break when dropped, which matters for packaging used in the shower or by the sink.
The whole set is declared suitable for contact with cosmetics. Only the pump has a separate food-contact certificate; the bottle does not have one. The set as a whole is therefore intended for cosmetic products.
What the set is suitable for
- Liquid soap and shower gel – the pump dispenses surfactant-based products of low to medium viscosity evenly and without dripping down the neck.
- Shampoo and thinner conditioner – formulations that are easy to press out. The pump cannot move a thick conditioner with a high wax content.
- Body lotion and light emulsion – leave-on O/W emulsions with a liquid to creamy consistency, where a dose per single press is useful.
- Vegetable and massage oils – water-free oil products are dispensed without leaking, and the level is easy to see through the clear PET.
Dispensing and filling
One press of the pump dispenses approximately 1 ml of product. After filling and screwing on the pump, press it several times until the dip tube fills and dispensing begins.
The nominal volume of 150 ml is the amount the bottle is designed for in normal filling. The brimful capacity is the physical volume up to the neck and is slightly larger. The difference provides a reserve for the pump’s dip tube and for expansion of the contents. The bottle should therefore be filled to the nominal volume, not to the brim, otherwise the contents will overflow when the pump is screwed on.
The pump’s dip tube is longer than the internal height of the bottle. Before first use, shorten it with a sharp knife using a diagonal cut so that it ends just above the bottom. The pump will then draw up almost all of the contents and the dip tube will not kink at the bottom.
Good to know
Clear PET does not protect the contents from light. For light-sensitive formulations, for example those with a higher proportion of essential oils, plant extracts or vitamins, we recommend filling them into dark packaging or keeping the set out of direct sunlight.
The pump is intended for liquid and creamy contents. Thick creams, body butters, balms and products with solid particles, such as scrubs, would clog the dip tube or could not be pressed out of the bottle. A jar or container is more suitable for such formulations.
Never fill a hot emulsion directly into the PET bottle. Let it cool to room temperature while stirring continuously, and only then fill. With a high proportion of essential oils or solvents, we recommend first testing how the packaging behaves with your specific formulation on a single piece.
Before the first filling, wash the bottle and the pump, disinfect them with isopropyl alcohol or ethanol and let them dry completely. The set can be reused. Unscrew the pump, pump clean water through it, rinse the bottle and dry both parts. When switching to a different type of product, for example from an oil to a surfactant gel, thorough cleaning of the dip tube is necessary.
The bottle has a 24/410 neck finish. You will find other closures with the same type of neck, as well as ready-made combinations, in the Handymade range. For your own combination, we recommend checking the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
The bottle is made of PET and the pump of PP. For recycling, the two parts are separated and sorted as plastic.
Frequently asked questions
Parameters
Plastic bottle, clear round, 24/410, 150 ml, without cap
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.

































































