White Plastic Bottle, Black Spray with Glossy Silver Collar, 100 ml

A white plastic bottle with a volume of 100 ml and a black mini trigger sprayer with a glossy silver collar make a ready-to-use set for water-based and alcohol-based products applied by spraying. The PET bottle is lightweight and does not break when dropped. The white opaque wall shields the contents from light, which helps when storing hydrosols, toners and products with more sensitive ingredients. The sprayer with a 24/410 neck finish screws directly onto the bottle, so after washing, the set is ready to fill without searching for a suitable closure.

The set is declared suitable for contact with cosmetics. Only the bottle has a separate certificate for direct food contact; the sprayer does not, so the set as a whole is intended for cosmetic products.

What the set is suitable for

The mini trigger sprayer disperses a thin liquid into a fine mist, and one press releases approximately 0.12 ml. It is suitable for anything applied in a thin layer over a larger area without touching the contents by hand.

• Facial toners and hydrosols – spraying replaces a cotton pad and reduces product consumption.
• Hair and body sprays – light liquids with low viscosity pass through the nozzle without problems.
• Alcohol-based disinfectant sprays and air fresheners – the white bottle looks neutral and is also suitable for technical products.
• Room and fabric sprays – water-based solutions with a solubilised fragrance that do not require a heavy stream.

Filling and volume

The nominal volume is the amount the bottle is designed for in normal filling. The total volume up to the neck is larger. The difference serves as a reserve for the dip tube and the sprayer mechanism and for the expansion of the contents when the temperature changes. Fill up to the nominal volume, not to the brim, otherwise some of the liquid will be pushed out through the neck when the sprayer is screwed on.

Fill the bottle only once the contents have cooled. PET is not intended for hot filling, so protect the bottle from heat, as it may deform at high temperatures.

Preparation and use

Before the first filling, wash the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and leave them to dry completely. Residual water in the sprayer would dilute the first doses of the product.

After screwing it on, a few dry presses are enough to prime the mechanism until it starts dispensing evenly. When reusing the sprayer, rinse it with clean water and spray it through so that residues of the previous contents do not dry in the nozzle.

Good to know

• Essential oils and solvents – PET tolerates common water-based and alcohol-based products. With a higher proportion of essential oils or other aggressive substances, we recommend checking how the bottle behaves with your specific formulation, as the material should not be exposed to aggressive chemicals.
• Opacity – the white wall protects the contents, but you cannot see the level. When producing for sale, track consumption by weight or by the number of doses.
• Other closures – the bottle has a 24/410 neck, so it can also be used with other closures with the same neck type from the Handymade range. When making your own combination, check the tightness and dispensing with your specific formulation.
• Recycling – the bottle is made of PET and belongs in plastic waste. The sprayer combines plastic with aluminium, so separate it from the bottle before disposal.

Frequently asked questions