White Plastic Bottle, White Spray with Matte Silver Collar, 250 ml

The sprayer is optimised primarily for thin, water-based and low-viscosity formulations, such as hydrolats, toners, light hair sprays or air fresheners. With significantly more viscous products or emulsions, atomisation may be less uniform, so we recommend always testing the behaviour of the specific solution in this type of packaging in advance and, if necessary, adjusting the formula or choosing a different dosing type.

The packaging can be reused if strict hygiene rules are observed. Before each refill, the bottle and the sprayer must be thoroughly cleaned and then disinfected with a suitable alcohol-based preparation, for example IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based. After rinsing and complete drying, you can safely refill the packaging. For hygiene reasons, we do not recommend combining in one container products with very different purposes (for example, body cosmetics and cleaning agents).

We recommend first rinsing the packaging with warm water and a gentle cleaning agent to remove residues of the original product. Then it is advisable to rinse the bottle and the spray mechanism with clean water so that no detergent residues remain. Finally, the packaging must be disinfected with an alcohol solution, for example with the products IPA 99 % isopropyl alcohol or ethanol 96 % denatured plant-based, making sure to let all parts dry thoroughly at room temperature. This procedure helps minimise microbiological risks and increases the safety of repeated use.

We recommend storing the bottle in a dry place, protected from direct sunlight and sources of heat. The stability of the contents is best preserved at normal room temperature and in an environment without significant temperature fluctuations. When handling, pay attention to the cleanliness of the sprayer and minimise contact of the neck with skin or impurities to reduce the risk of contamination. After each use, it is important to close the sprayer tightly, which prevents unwanted leakage of the product and reduces air access to the container.

If you decide not to reuse the packaging, we recommend first emptying it and removing any product residues. The subsequent method of recycling must be adapted to the type of plastic material specified in the parameter table for the product on the Handymade.sk website. According to this designation, place the bottle and sprayer in the appropriate separate waste stream (usually the plastics container) or into a collection system corresponding to the given material. Observing local waste-sorting rules helps ensure that the material is recycled and reused as efficiently as possible.

When selecting suitable packaging, we recommend using the advanced filter available at the top of the page after clicking on a specific packaging category. In the advanced filter, you can clearly sort the packaging by parameters such as neck, size, colour and material, which makes it easier to find a solution tailored to the specific product and dosing method. In this way, you can quickly compare several bottles, dropper bottles or jars and choose the variant that best meets your technological and aesthetic requirements.