+421 950 333 113info@handymade.store−10 %Shop now

ALUMINUM BOTTLES

Aluminium Bottle, Silver Pump, 100 ml

Pack size50 ml100 ml200 ml

The aluminium bottle with a silver pump is a ready-to-use set for filling with liquid and semi-liquid cosmetic products that are dispensed by pressing. full description

AvailabilityIn stock · 15 pcs
Product codeO24HS100-OVD24PS
€3.11incl. VAT

Lowest price in the last 30 days: €3.11

Volume pricing
1–199 pcs€3.11Your price
200–999 pcs€2.85−8 %
1000–4999 pcs€2.64−15 %
from 5000 pcs€2.33−25 %

Total for 1 pcs: €3.11

Quantities add up across all combinations of this bottle.

Product description

The aluminium bottle with a silver pump is a ready-to-use set for filling with liquid and semi-liquid cosmetic products that are dispensed by pressing. The aluminium bottle is opaque, so it protects the contents from light. Compared with glass, it is lightweight and does not break when dropped. It is suitable for products that are kept in the shower or by the sink, or taken on trips: body lotions, liquid soaps, shampoos, conditioners, facial gels and lighter creams.

The pump with a clear body and a glossy silver collar matches the bottle in appearance. One press dispenses approximately 0.65 ml of the contents. You can therefore measure out a dose without unscrewing the closure and without your fingers touching the contents. The dip tube is part of the pump and reaches the bottom of the bottle, so even the last of the filling can be used.

The set is declared suitable for contact with cosmetic products. You will find the declaration of conformity with the product. The set is not intended for food.


What it is suitable for

  • Body lotions and lighter creams – thinner emulsions pass through the pump without problems, and one press is enough for the hands or face.
  • Liquid soaps, shampoos and conditioners – the opaque bottle suits the humid environment of a bathroom, and the contents are not contaminated with repeated use.
  • Massage and body oils – light-sensitive oils are better protected in aluminium than in a clear bottle, and the pump allows you to measure out a small amount.
  • Face gels and light serums – for water-based and more acidic formulations, we recommend a trial filling, see “Good to know”.
  • Samples and travel packs – the 100 ml volume and the low weight of the bottle make it suitable for packing in hand luggage.

Nominal volume and total volume

The bottle has a nominal volume of 100 ml. This is the volume the packaging is designed for in normal filling. The brimful volume is the physical volume up to the neck and is given in the parameters. The difference between the two values is a reserve for the dip tube and the immersed part of the pump, and for the expansion of the contents when the temperature changes. Fill to the nominal volume, not to the brim. Otherwise the contents would overflow once the pump is screwed on.


Working with the pump

After filling and screwing on the pump, press it several times until the contents travel through the dip tube to the outlet. The amount per press is determined by the construction of the pump and cannot be adjusted. With thicker creams the dose will be smaller, or the pump will not draw the contents at all.

Check the thickness of your formulation directly in this set before making a larger batch. If the pump does not draw the contents, reducing the proportion of thickener or waxes in the recipe will help, not pressing harder.

Viscous creams, balms and products with solid particles, for example scrubs or clay masks, do not belong in this set. Jars or bottles with a cap are more suitable for them.


Good to know

  • Preparation before first filling – wash the bottle and the pump, disinfect the inside with isopropyl alcohol or ethanol, rinse the dip tube and leave everything to dry completely. Residual water in the bottle can spoil anhydrous contents and dilute the preservative in water-based products.
  • Water-based and acidic formulations – aluminium can react with contents of low or high pH and with formulations with a high proportion of water. We therefore recommend checking how the packaging behaves with your specific formulation by means of a trial filling. After several weeks, watch for any change in the colour, fragrance or appearance of the contents.
  • Essential oils and solvents – the body of the pump is made of plastic (PP). With formulations containing a higher proportion of essential oils, alcohol or other solvents, check whether the seal and the valve leak and whether the plastic becomes cloudy.
  • Reuse – the set can be used repeatedly. Before refilling, rinse the pump with warm water and a small amount of washing-up liquid, pump the water through it, then rinse with clean water and leave to dry. Residues of the old contents in the dip tube and valve are a common source of contamination.
  • Other closures – the bottle has a 24/410 neck finish. Closures with the same neck type, as well as ready-made combinations, can be found in the Handymade range. If you make your own combination, we recommend checking the tightness and the dispensing.
  • Recycling – the aluminium bottle belongs with metals. The pump contains plastic and a metal collar, so separate it from the bottle before disposal.

Do not fill the aluminium bottle with hot contents. Let the emulsion or oil blend cool to room temperature before filling.


Frequently asked questions

Does the aluminium bottle protect the contents from light?
Yes, the aluminium bottle is completely opaque and does not let light through the wall. It is therefore suitable for vegetable oils, formulations with vitamins or essential oils, and other ingredients that lose their effect or change colour in light. You cannot see the fill level through the bottle, so keep an eye on its weight or note the filling date.
How much product does the pump dispense per press?
The pump dispenses approximately 0.65 ml of the contents per full press. The value applies to thinner formulations; with thicker creams the dose is smaller. When using it for the first time, press the pump several times until the contents travel through the dip tube to the outlet.
Can the aluminium bottle with a pump be filled with a water-based toner or an acidic serum?
We recommend checking suitability for water-based and acidic formulations by means of a trial filling. Aluminium can react with contents of low pH or with a high proportion of water. During the trial, watch for any change in the colour, fragrance or appearance of the contents after several weeks. This set is commonly used for oils, emulsions and liquid soaps.
How do I prepare the aluminium bottle with a pump before first filling?
Wash the bottle and the pump, disinfect the inside with isopropyl alcohol or ethanol and leave to dry completely. Pump the disinfectant through the dip tube and the pump as well, so that the entire inside of the pump is treated. Do not fill a bottle containing drops of water with anhydrous oils or balms.
Why is the aluminium bottle with a pump not filled to the brim?
The aluminium bottle with a pump is filled to the nominal volume of 100 ml because, once the pump is screwed on, the dip tube with the immersed part takes up some of the space and the contents would overflow. The brimful volume given in the parameters is only the physical capacity of the bottle. The reserve also allows the contents to expand when the temperature changes.
Can the aluminium bottle with a pump be reused?
Yes, the set is designed for repeated filling. Before each new filling, rinse the pump with warm water and washing-up liquid, pump it through, rinse with clean water and leave to dry. Disinfect the bottle again. If the pump seal leaks after longer use, replace the pump with a new one with the same neck type.

Parameters

Aluminium bottle, 24/410, 100 ml

Product colour
Silver
Country of origin
China
Nominal capacity
100
Brimful capacity
106 ml
Diameter
40 mm
Thread type
24/410
Height
110 mm
Product material
Aluminium

Plastic dispenser, 24/410, transparent, shiny silver collar

Product colour
SilverClear
Country of origin
China
Diameter
42,2 mm
Thread type
24/410
Height
45 mm
Tube length
130 mm
Product material
AluminiumPPPlastic
Dose
0,65 ml

Product documentation

PPWRPackaging Declaration (PPWR)
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
PDSProduct Data Sheet
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Plastic dispenser, 24/410, transparent, shiny silver collar · OVD24PSPDF ↓
DrawingTechnical drawing
Aluminium bottle, 24/410, 100 ml · O24HS100PDF ↓
Download all (ZIP)

4 PDF files in one archive

REVIEWS

Verified by customers.

No reviews yet.

Only customers with a delivered order can write reviews.