ALUMINUM BOTTLES
Aluminium Bottle, Transparent Spray With Glossy Silver Collar, 50 ml
Pack size50 ml100 ml200 ml225 ml
The aluminium bottle with a mini trigger sprayer holds 50 ml and is designed for thin cosmetic products that are applied as a spray. full description
Lowest price in the last 30 days: €2.50
Total for 1 pcs: €2.50
Quantities add up across all combinations of this bottle.
Product description
The aluminium bottle with a mini trigger sprayer holds 50 ml and is designed for thin cosmetic products that are applied as a spray. Aluminium blocks light, so it is also suitable for toners, hydrosols and perfumed waters containing light-sensitive ingredients. The bottle is lightweight and does not break when dropped, which you will appreciate for products meant for a handbag, travel or a sports bag. The sprayer with a clear head and a glossy silver collar echoes the silver finish of the bottle, so the set looks coherent even without further decoration.
The set is supplied as a ready-made pair with a 24/410 neck finish. Both the bottle and the sprayer are declared suitable for contact with cosmetic products.
What it is suitable for
- Facial toners and hydrosols – thin water-based products pass through the nozzle without any problem, and the aluminium protects them from light.
- Refreshing and setting facial sprays – water-based sprays with glycerine, aloe or hyaluronic acid at a low usage rate.
- Hair sprays and leave-in conditioners – light water-based products or low-viscosity emulsions that are meant to form an even layer on the hair.
- Perfume waters and body sprays – alcohol-based products for which the opacity of the bottle is not an obstacle.
- Hand sprays and alcohol-based refreshers – cosmetic products in a travel size.
How the set works
The sprayer is mechanical, with no propellant. When you press the head, the contents are drawn up through the dip tube from the bottom of the bottle and dispersed into a fine mist. One press releases approximately 0.12 ml, which at full volume corresponds to roughly four hundred doses.
The sprayer reliably disperses only thin liquids. Thicker emulsions, serums with a thickener or vegetable oils may clog the nozzle or come out in drops. Before filling a larger batch, test one piece with the finished formulation.
Nominal and brimful volume
The nominal volume is the amount the bottle is designed for during normal filling. The brimful volume is the physical volume up to the neck. The difference between the two values leaves room for the sprayer dip tube and for the expansion of the contents when the temperature changes. For this reason, fill the bottle up to the nominal volume. If it is filled to the brim, the dip tube pushes part of the contents out, the thread gets dirty and the sprayer may not seat properly.
Good to know
Before the first filling, rinse the bottle and the sprayer, disinfect them with isopropyl alcohol or ethanol and let them dry completely. To flush the sprayer, immerse the dip tube in clean water and press several times, then pump it a few times while empty so that any residue is expelled from the tube.
Aluminium has a different surface from glass, so it is worth checking how it behaves with your specific contents. This applies especially to products with a lower pH, a higher proportion of essential oils or a high alcohol concentration. Fill a test piece, leave it for several weeks at normal temperature and observe the scent, the colour and the condition of the inner surface. At the same time, check the tightness of the thread and the behaviour of the sprayer with the finished formulation.
The set can be used repeatedly. When changing the contents, rinse the sprayer thoroughly, otherwise the dip tube and the nozzle will retain the scent of the previous filling. You can find closures with the same neck type and other ready-made bottle and closure combinations in the Handymade range. If you make your own combination, check the tightness and the dispensing.
The set is not intended for contact with food. Use it for cosmetic products.
At the end of its life, separate the bottle and the sprayer. The aluminium bottle belongs in metal waste, and the polypropylene sprayer with an aluminium collar belongs in plastic waste, according to the rules in your region.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 50 ml
Product documentation
- DrawingTechnical drawing
- PDF ↓
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.























































