ALUMINUM BOTTLES
Aluminium bottle, clear pump, 50 ml
This aluminium bottle with a clear pump for 50 ml of contents is used for filling liquid cosmetic products that are dispensed by pressing the pump: face and body lotions, lighter-textured serums, cleansing gels, face or… full description
Lowest price in the last 30 days: €1.89
Total for 1 pcs: €2.54
Quantities add up across all combinations of this bottle.
Product description
This aluminium bottle with a clear pump for 50 ml of contents is used for filling liquid cosmetic products that are dispensed by pressing the pump: face and body lotions, lighter-textured serums, cleansing gels, face or body oils, or liquid soaps in travel size. The aluminium body is lightweight, unbreakable and blocks light completely, which helps with formulations containing light-sensitive ingredients. Both the bottle and the pump are declared as suitable for contact with cosmetic products.
What the set is suitable for
The small volume and durable material make this set well suited as packaging for travel and sample sizes to carry in a cosmetic bag, sports bag or handbag, where glass would be heavy and could break. The pump dispenses the same amount without opening the packaging, so the contents come into less contact with air and fingers than with a jar. The silver bottle is unprinted and can be left in its plain metal finish.
- Light protection – aluminium does not let light through, so the packaging is suitable for oils, serums and emulsions with active ingredients that are harmed by light.
- Pump dispensing – one press releases approximately 1.4 ml, which corresponds to one dose of face lotion or serum.
- Clear pump – through the head and tube you can see whether the system is filled and whether the contents rise during dispensing.
- Low weight – the bottle and the pump are light, so the set will not weigh down your luggage or handbag.
Filling and handling the pump
The pump is supplied with a long tube, which you adjust to the height of the bottle before first use. On the first press, the tube and head are filled first, and the contents come out only after several presses.
Shorten the tube so that, once the pump is screwed on, it reaches just to the bottom and does not bend. A bent or too short tube will not draw the contents all the way to the end.
The nominal volume of 50 ml is the volume the bottle is designed for in normal filling. The total brimful volume is the physical volume up to the neck. The difference between them is a reserve for the tube and the pump body and for the expansion of the contents with temperature changes.
Fill the bottle only up to the nominal volume. If it is filled to the brim, the contents will overflow through the thread once the pump is screwed on, and the set will not seal.
The pump is designed for liquid to medium-thick formulations. Thick creams, gels with high viscosity or products with solid particles (scrubs) may block the tube or be impossible to pump. For such recipes, we recommend testing the dispensing beforehand.
Good to know
Before first filling, wash and disinfect the bottle and the pump and let them dry completely. Residual water in the tube would dilute the first doses. Repeat the same procedure before each further filling, taking the pump apart and rinsing the tube and head as well.
For water-based, acidic or alkaline formulations, we recommend verifying the compatibility of the contents with the packaging by a stability test in your specific recipe. Oil-based and anhydrous formulations are less demanding in this respect, but we recommend a stability test for every new combination of packaging and recipe.
Other closures with the same type of thread can also be used on a bottle with a 24/410 neck finish. You will find them in the Handymade range, together with ready-made combinations of packaging and closure. For your own combination, we recommend verifying the tightness, the dispensing and the behaviour of the packaging with your specific formulation.
After you finish using it, take the set apart and sort it by material: the aluminium bottle as metal, the polypropylene pump as plastic.
Frequently asked questions
Parameters
Aluminium bottle, 24/410, 50 ml
Transparent Plastic Pump, 24/410, FBOG 200 mm
Product documentation
Verified by customers.
No reviews yet.
Only customers with a delivered order can write reviews.
















































